CTDD1507MF-1209-SU3K-1

CTDD1507MF-1209-SU3K-1

  • 厂商:

    CT(兆龙)

  • 封装:

  • 描述:

    CTDD1507MF-1209-SU3K-1 - DC/DC Converters - Central Technologies

  • 详情介绍
  • 数据手册
  • 价格&库存
CTDD1507MF-1209-SU3K-1 数据手册
DC/DC Converters ctparts.com SPECIFICATIONS CTDD1507MF-SU3K-1 Series Fixed Input Isolated & Unregulated 1W Output, Single Output Part Number CTDD1507MF-0303-SU3K-1 CTDD1507MF-0305-SU3K-1 CTDD1507MF-0503-SU3K-1 CTDD1507MF-0505-SU3K-1 CTDD1507MF-0509-SU3K-1 CTDD1507MF-0512-SU3K-1 CTDD1507MF-0515-SU3K-1 CTDD1507MF-1203-SU3K-1 CTDD1507MF-1205-SU3K-1 CTDD1507MF-1209-SU3K-1 CTDD1507MF-1212-SU3K-1 CTDD1507MF-1215-SU3K-1 Vin Nom. (VDC) 3.3 3.3 5 5 5 5 5 12 12 12 12 12 Input Range (VDC) 3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 Vout (VDC) 3.3 5 3.3 5 9 12 15 3.3 5 9 12 15 Iout Max. (mA) 300 200 300 200 111 84 67 300 200 111 84 67 Iout Min. (mA) 30 20 30 20 12 9 7 30 20 12 9 7 Effi. Typ. (%) 72 73 74 70 75 78 80 75 72 76 79 81 Not shown at actual size. Compliant RoHS ISOLATION SPECIFICATIONS Item Isolation Voltage Isolation Resistance Test Condition Tested for 1 minute Test at 500VDC MIN 3000 1000 TYP MAX Units VDC MΩ OUTPUT SPECIFICATIONS Item Output Power Line regulation For Vin change of 1% 10% to 100% load(5V output) 10% to 100% load(9V output) 10% to 100% load(12V output) 10% to 100% load(15V output) Output voltage accuracy Temperature drift Output ripple Switching frequency See tolerance envelope graph 100% full load 20MHz Bandwidth Full load, nominal input 75 100 0.03 150 %/°C mVp-p KHz 12.8 8.3 6.8 6.3 Test Condition MIN 0.1 TYP MAX 1 1.2 15 9.0 7.5 7.0 Units W % % % % % FEATURES Efficiency: To 81% Temperature Range: -40°C to 85°C Isolation: 3KVDC Package: UL94-V0 Miscellaneous: No heat sink required. No external component required. Industry standard pinout. Small footprint. High power density. Single voltage output. Custom service available. Samples available. Load regulation Note: 1. All specifications measured at TA=25°C, humidity3,500,000 hours Miscellaneous: RoHS Compliant. TYPICAL CHARACTERISTICS Tolerance Envelope Graph Temperature Derating Graph Typic a l Load Line +2.5% -2.5% -7.5% Output Power(%) Output Voltage(%) +10% +5% Nominal Voltage 120 100 80 60 40 20 0 Safe Operating Area 10% 50% 100% -40 0 40 80 120 Output Current(%) Ambient Temperature(°C) 08.16.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL DC/DC Converters ctparts.com CTDD1507MF-SU3K-1 Series Fixed Input Isolated & Unregulated 1W Output, Single Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS 15.24 7.62 6.70 Detail A 11.5 Max. 7.50 Top View Front View 7.0 1.85Max. 0.3 Detail A 15.24 0.50 6.00 Side View 5.00° 1.50 1.20 Note: All pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm PIN CONNECTIONS 12 11 10 Pin 1 2 3 5 6 Function GND Vin NC 0V NC 1 2 3 8 7 Pin 7 8 10 11 12 Function NC +Vo NC NC NC 5 6 08.16.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL
CTDD1507MF-1209-SU3K-1
### 物料型号 - 型号系列为“CTDD1507MF-SU3K-1”,包含多个具体型号,如CTDD1507MF-0303-SU3K-1、CTDD1507MF-0305-SU3K-1等,不同型号对应不同的输入电压和输出电压。

### 器件简介 - 这是一个固定输入隔离且未稳压的1W单路输出DC/DC转换器。

### 引脚分配 - 引脚1:GND(地) - 引脚2:Vin(输入电压) - 引脚3至6:NC(空脚) - 引脚7:NC(空脚) - 引脚8:+Vo(输出电压) - 引脚10至11:NC(空脚)

### 参数特性 - 输入电压范围:3.0-3.6VDC至12.0-13.2VDC不等,根据具体型号而定。 - 输出电压:3.3VDC、5VDC、9VDC、12VDC、15VDC等。 - 最大输出电流:根据不同型号,从12mA到300mA不等。 - 效率:最高可达81%。 - 隔离电压:3000VDC。 - 隔离电阻:在500VDC测试条件下,最小为1000MΩ。 - 工作温度范围:-40°C至85°C。 - 封装材料:UL94-V0等级塑料。

### 功能详解 - 效率高达81%。 - 提供3kVDC隔离保护。 - 封装符合UL94-V0防火等级。 - 不需要散热片和外部组件。 - 行业标准引脚配置,小尺寸,高功率密度,单电压输出。 - 提供定制服务和样品。

### 应用信息 - 适用于需要隔离保护和高效率转换的应用场合。

### 封装信息 - 所有引脚间距为2.54mm,引脚直径为0.50mm。 - 提供了推荐的足迹细节和外形尺寸图。
CTDD1507MF-1209-SU3K-1 价格&库存

很抱歉,暂时无法提供与“CTDD1507MF-1209-SU3K-1”相匹配的价格&库存,您可以联系我们找货

免费人工找货