CTDD2210D-S

DC/DC Converters ctparts.com SPECIFICATIONS CTDD2210D-S Series Fixed Input Isolated & Unregulated 1W Output, Single Output Part Number CTDD2210D-0503S-1 CTDD2210D-0505S-1 CTDD2210D-0509S-1 CTDD2210D-0512S-1 CTDD2210D-0515S-1 CTDD2210D-0524S-1 CTDD2210D-1203S-1 CTDD2210D-1205S-1 CTDD2210D-1209S-1 CTDD2210D-1212S-1 CTDD2210D-1215S-1 CTDD2210D-1224S-1 CTDD2210D-2403S-1 CTDD2210D-2405S-1 CTDD2210D-2409S-1 CTDD2210D-2412S-1 CTDD2210D-2415S-1 CTDD2210D-2424S-1 CTDD2210D-4803S-1 CTDD2210D-4805S-1 CTDD2210D-4809S-1 CTDD2210D-4812S-1 CTDD2210D-4815S-1 CTDD2210D-4824S-1 8 Nominal Input Voltage Input Voltage (VDC) 5 5 5 5 5 5 12 12 12 12 12 12 24 24 24 24 24 24 48 48 48 48 48 48 Output Voltage (VDC) 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 9 12 15 24 Output Current (mA) 300 200 111 84 67 42 300 200 111 84 67 42 300 200 111 84 67 42 300 200 111 84 67 42 Input Curr.8 Full Load (mA) 274 274 268 255 253 253 112 112 105 102 102 102 58 58 52 50 50 50 28 28 27 25 25 25 Input Curr.8 No Load (mA) 21 21 20 20 20 20 11 11 10 10 10 10 10 10 6 5 5 5 3 3 3 3 2 2 Effi9 (%) 73 73 75 78 79 79 74 74 79 82 82 82 72 72 80 83 83 83 74 74 77 83 83 83 Not shown at actual size. 9 Nominal Input Volatge, Full Load FEATURES Efficiency: 70%-80% Isolation Voltage3: 1000 VDC min Isolation Resistance: 109 ohms min Isolation Capacitance: 80pF max. Switching Frequency: 50kHz min MTBF5: >2,000,000 hours Weight: 3.1g Typ. Case Material: Non-Conductive Plastic Case Size: 22.6mm x 9.9mm x 8.4mm Conducted Emissions: EN55022 Class A Radiated Emissions: EN55022 Class A INPUT SPECIFICATIONS Input Voltage Range: ±10% max Input Filter: Capacitor Typ Protection: Fuse Recommended OUTPUT SPECIFICATIONS Output Power: 1W Voltage Setpoint Accuracy: ±2% max Temperature Coefficient: ±0.03%/°C Ripple & Noise(20MHz BW): 100mVp-p max Line Regulation1: ±1.2% max Load Regulation2: ±8% max Minimum Load: 10% of Full Load Short Circuit Protection: Momentary Transient Response4: 200uS max ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -25°C to +71°C Storage Temperature: -55°C to +125°C Humidity: 95% max Cooling: Free-Air Convection All specifications typical at nominal line, full load, and 25°C unless otherwise noted. TYPICAL CHARACTERISTICS Efficiency Vs. Load Derating Curve Efficiency(%) 80.0 60.0 40.0 20.0 0.0 0 20 40 60 80 100 % Of Rated Load(%) Output Power(W) 1.2 0.9 0.6 0.3 0.0 -25 1 2 3 4 5 High Line to Low Line. Load Regulation is for output load current change from 20% to 100% For 10 seconds 25% Step Load Change MIL-HDBK-217 @25°C, Ground Benign Safe Operating Area 0 25 50 TA(°C) 70 100 02.16.05 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL DC/DC Converters ctparts.com CTDD2210D-S Series Fixed Input Isolated & Unregulated 1W Output, Single Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2210D-S Package 9.9 16 1 3.81 12.7 22.6 11 10 9 6 7 8 2.54 7.62 Bottom View 8.4 Side View CTDD2210D-S Footprint Top View 16 11 10 9 2.54 2.54 1 6 7 8 ø0.8+0.2/-0 All dimensions in mm PIN CONNECTIONS 16 Pin Function +Vin 1&16 -Vout 6&11 7&10 +Vout -Vin 8&9 1 11 10 9 6 7 8 02.16.05 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL