CTDD2210S-2415S-2

DC/DC Converters ctparts.com SPECIFICATIONS CTDD2210S-S Series Wide Input Isolated & Regulated 2W Output, Single Output Part Number CTDD2210S-0505S-2 CTDD2210S-0509S-2 CTDD2210S-0512S-2 CTDD2210S-0515S-2 CTDD2210S-1205S-2 CTDD2210S-1209S-2 CTDD2210S-1212S-2 CTDD2210S-1215S-2 CTDD2210S-1505S-2 CTDD2210S-1509S-2 CTDD2210S-1512S-2 CTDD2210S-1515S-2 CTDD2210S-2405S-2 CTDD2210S-2409S-2 CTDD2210S-2412S-2 CTDD2210S-2415S-2 CTDD2210S-4805S-2 CTDD2210S-4809S-2 CTDD2210S-4812S-2 CTDD2210S-4815S-2 Vin Nom. 5VDC 5VDC 5VDC 5VDC 12VDC 12VDC 12VDC 12VDC 15VDC 15VDC 15VDC 15VDC 24VDC 24VDC 24VDC 24VDC 48VDC 48VDC 48VDC 48VDC Input Range 4.5-9VDC 4.5-9VDC 4.5-9VDC 4.5-9VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 12-24VDC 12-24VDC 12-24VDC 12-24VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC Vout 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC Iout Max. (mA) 400 220 165 132 400 220 165 132 400 220 164 132 400 220 165 132 400 220 165 132 Iout Min. (mA) 40 22 16 13 40 22 16 13 40 22 16 13 40 22 16 13 40 22 16 13 Effi(Typ.) 67% 69% 72% 75% 75% 75% 77% 80% 75% 79% 80% 81% 78% 80% 83% 85% 76% 81% 82% 83% Not shown at actual size. ISOLATION SPECIFICATIONS Item Test Condition Flash tested for 1 minute Test at 500VDC MIN 1000 1000 TYP MAX Units VDC MΩ FEATURES Efficiency: To 83% Temperature Range: -40°C to 85°C Isolation: 1KVDC Package: UL94-V0 Miscellaneous: Single Output Voltage. No heatsink required. Industry standard pinout. Pin compatible with MSB series. Wide (2:1) Input Range. Custom service available. Samples available. Isolation Voltage Isolation Resistance OUTPUT SPECIFICATIONS Item 2W Output Power Output Voltage Accuracy Load regulation Line Regulation Temperature drift(Vout) Ripple Noise Switching Frequency Switching Frequency Refer To Recommended Circuit 10% to 100% load Input Voltage From Low to High Refer To Recommended Circuit 20Hz-300KHz bandwidth DC-20MHz bandwidth 100% Load, Nominal Input Voltage 10% Load, Nominal Input Voltage 80 250 40 80 Test Condition MIN 0.2 ±1 ±0.1 ±0.2 TYP MAX 2 ±3 ±0.2 ±0.5 0.03 60 150 200 600 Units W % % % %/°C mVp-p mVp-p kHz kHz CHARACTERISTICS Output Short Circuit Protection: Continuous Temperature Rise at Full Load: 30°C Typ. Cooling: Free air convection No-Load Power Consumption: 150mW Typ. Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -55°C to +125°C Lead Temperature: 300°C (1.5mm from case for 10 seconds) Storage Humidity Range: < 95% Case Material: Plastic (UL94-V0) MTBF: >1,000,000 hours Note: 1. All specifications measured at TA=25°C, humidity