CTDLP2012F-900

SMD Common Mode Filters ctparts.com CTDLP2012F Series From 70 Ω to 220 Ω Part Number CTDLP2012F-700 CTDLP2012F-900 CTDLP2012F-121 CTDLP2012F-181 CTDLP2012F-221 Not shown at actual size. SPECIFICATIONS Parts only available in ±25% impedance tolerance. Impedance ±25% (Ω) 70 90 120 180 220 DCR Max. (Ω) 0.60 0.70 0.80 1.00 1.00 Rated Current Max. (mA) 400 400 400 330 330 Rated Voltage Max. (V) 10 10 10 10 10 Insulation Resistance Min. (mΩ) 100 100 100 100 100 PHYSICAL DIMENSIONS Compliant RoHS Size mm inches L 2.0±0.2 .08±.008 W 1.25±0.2 .05±.008 T 1.0±0.1 .04±.004 C1 0.6±0.2 .02±.008 C2 0.25±0.15 .01±.006 D 1.0±0.1 .04±.004 M 0.20±0.1 .008±.004 C2 CHARACTERISTICS Description: SMD Common Mode Filters Applications: Noise suppression in digital bus line equipment. IEEE 1394a HUB & IEEE 1394a control lines. USB host controller & USB, HUB control lines. Impedance Tolerance: ±25% Testing: Impedance is tested on an HP4285A at specified frequency Packaging: Tape & Reel Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. L D T C1 W M 03.24.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL