CTDLW31SF-161T03

Common Mode Chokes ctparts.com SPECIFICATIONS CTDLW31S Series From 90 Ω to 600 Ω Part Number Not shown at actual size. CTDLW31SF Please specify “F” for RoHS compliant. Common Mode Imp. @100MHz (Ω) 90±25% DCR Max. (Ω) 0.30 0.40 0.50 0.80 Rated Current (mA) 400 350 350 260 Rated Volatge (Vdc) 50 50 50 50 Withstand Voltage (Vdc) 125 125 125 125 Insulation Resis. Min. (Ω) 10M 10M 10M 10M CTDLW31S_-900T04 CTDLW31S_-161T03 160±25% CTDLW31S_-221T03 220±25% CTDLW31S_-601T03 600±25% PHYSICAL DIMENSIONS Size mm inches A 3.2±0.2 0.125±0.008 B 1.6±0.2 0.063±0.008 C 2.0±0.2 0.079±0.008 D Typ. 0.6 0.024 CHARACTERISTICS Description: SMD Wire Wound Common Mode Choke Coils for Signal Lines Applications: Suitable for radiation noise suppression for any electronic devices. Used to counter common mode noise interferance within high speed signal lines. Applications like: USB 2.0 Line for personal computers and peripheral devices, IEEE1394 line for personal computers, DVC etc and LVDS, panel link line for crystal display panels. Operating Temperature: -55°C to +125°C Testing: Impedance is tested on an HP4287A at 100 MHz Packaging: Tape & Reel Marking: Reels marked with part number. Additional Information: Additional electrical & physical information available upon request Miscellaneous: RoHS Compliant available. Samples available. See website for ordering information. PAD LAYOUT 04.30.07 Technologies Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2007 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL