CTEP125U-3R2M

Power Inductors - Shielded ctparts.com CTEP125U Series From 0.3 µH to 5.6 µH Not shown at actual size. SPECIFICATIONS Parts are available in ±20% only. * This indicates the current when the inductance decreases to 75% over it’s nominal value or DC current when the temperature rising ∆T=40°C lower, whichever is lower. CTEP125UF Please specify “F” for RoHS compliant L Test Freq. (kHz) 100 100 100 100 100 100 100 100 DCR Max. (mΩ) 2.5 2.5 2.5 3.4 5.4 8.0 11.4 13.5 Part Number CTEP125U_-0R3M CTEP125U_-0R6M CTEP125U_-0R8M CTEP125U_-1R4M CTEP125U_-2R2M CTEP125U_-3R2M CTEP125U_-4R3M CTEP125U_-5R6M Inductance (µH ±20%) 0.3 0.6 0.8 1.4 2.2 3.2 4.3 5.6 *Current (A) 35.0 30.0 27.2 20.8 14.8 12.8 11.0 9.5 Compliant Available RoHS PHYSICAL DIMENSIONS Size mm inches A Max. 12.9 .51 B Max. 12.9 .51 C Max. 5.8 .23 D 2.6±.2 .10±.01 E 7.0±.2 .28±.01 F 4.0±.2 .16±.01 G 4.2±.2 H 2.5±.2 0.17±0.1 .10±.01 CHARACTERISTICS Description: SMD shielded power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30°C to +100°C Inductance Tolerance: ±20% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT 01.03.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL