CTH217B(T1)

CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Features Description  High isolation 3750 VRMS These series of general purpose optocoupler  Multiple CTR selection available  DC input with transistor output  Operating temperature range - 55 °C to 125 °C  RoHS compliance  REACH compliance Applications  Halogen compliance  DC-DC Converters  Regulatory Approvals  Programmable controllers  UL - UL1577 (E364000)  Telecommunication equipment  VDE - EN60747-5-5(VDE0884-5)  Hybrid substrates that require high density  CQC – GB4943.1, GB8898  IEC60065, IEC60950 consists of a photo transistor optically coupled to a gallium arsenide Infrared-emitting diode in a 4-lead half pitch Mini-Flat package. mounting Package Outline CT Micro Proprietary & Confidential Schematic Page 1 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Absolute Maximum Rating at 25oC Symbol Parameters Ratings Units 3750 VRMS VISO Isolation voltage TOPR Operating temperature -55 ~ +125 oC TSTG Storage temperature -55 ~ +150 oC TSOL Soldering temperature 260 oC PTOT Total power dissipation 200 mW Forward current 50 mA 1 A Notes Emitter IF IF(TRANS) Peak transient current (≤1μs P.W,300pps) VR Reverse voltage 6 V PD Power dissipation 70 mW Power dissipation 150 mW BVCEO Collector-Emitter Breakdown Voltage 80 V BVECO Emitter-Collector Breakdown Voltage 7 V Collector Current 50 mA Detector PC IC CT Micro Proprietary & Confidential Page 2 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Electrical Characteristics T A = 25°C (unless otherwise specified) Emitter Characteristics Symbol Parameters Test Conditions Min Typ Max Units 1.24 1.4 V VF Forward voltage IF=10mA IR Reverse Current VR = 6V - - 5 µA Input Capacitance f= 1MHz - 10 30 pF Min Typ Max Units CIN Notes Detector Characteristics Symbol Parameters Test Conditions BVCEO Collector-Emitter Breakdown IC= 0.1mA 80 - - V BVECO Emitter-Collector Breakdown IE= 0.1mA 7 - - V Collector-Emitter Dark Current VCE= 20V, IF=0mA - - 100 nA Min Typ Max Units ICEO Notes Transfer Characteristics Symbol Parameters Test Conditions CTH217 50 600 CTH217A 80 160 130 260 CTH217C 200 400 CTH217D 300 600 Notes Current Transfer CTR CTH217B IF= 5mA, VCE= 5V % Ratio Collector-Emitter Saturation VCE(SAT) IF= 20mA, IC= 1mA - 0.1 0.2 V Voltage RIO Isolation Resistance VIO= 500VDC CIO Isolation Capacitance f= 1MHz Ω 5x1010 0.5 1 pF Min Typ Max Units - 6 18 - 8 18 Switching Characteristics Symbol tr Parameters Test Conditions Rise Time IC= 2mA, VCE= 2V, RL= 100Ω tf Fall Time CT Micro Proprietary & Confidential Page 3 Notes µs Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Typical Characteristic Curves Forward Current vs. Forward Voltage 10 100000 ICEO, Collector Dark Current (nA) IF, Forward Current (mA) 100 o o TA=-55 C TA=125 C 1 o TA=25 C 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Collector Dark Current vs. Ambient Temperature 10000 1000 VCE=80V 100 20V 1 0.1 2.0 -55 -40 -20 o 0.8 10V 0.6 5V 0.4 2V 0.2 60 80 100 o 120 125 50mA 20mA 100 10mA 5mA 10 2mA IF=1mA 1 VCE=1V 0.0 0.1 1 10 0.1 -55 -40 100 -20 VCE(SAT), Collector-Emitter Saturation Voltage (V) Normalizad to IF=5mA,VCE=5V 10mA o TA=25 C 20mA 1.2 5mA 1.0 2mA 0.8 IF=1mA 0.6 0.4 0.2 -40 -20 0 20 40 60 o 80 100 120 125 TA, Ambient Temperature ( C) Figure 5 CT Micro Proprietary & Confidential 20 40 60 80 100 120 125 TA, Ambient Temperature ( C) Figure 4 Collector-Emitter Stauration Voltage vs. Collector Current Normalized CTR vs Ambient Temperature 1.4 0 o IF, Foward Current (mA) Figure 3 CTR, Normalized Current Transfer ratio 40 VCE=5V Normalized to IF=5mA,VCE=5V TA=25 C 0.0 -55 20 Collector Current vs. Ambient Temperature Normalized CTR vs. Forward Current 1.0 1.6 0 TA, Ambient Temperature ( C) Figure 2 IC, Collector Current (mA) CTR, Normalized Current Transfer Ratio 1.2 10V 10 VF, Forward Voltage (V) Figure 1 1.4 VCE=5V 60V 40V 50 o TA=25 C 10 IF=0.5mA 2mA 1mA 5mA 1 50mA 20mA 0.1 10mA 0.01 1E-3 0.1 1 10 50 IC, Collector Current (mA) Figure 6 Page 4 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Collector-Emitter Saturation Voltage vs. Forward Current 10 Switching Speed vs. Load Resistance 100 VCE=2V IC=2mA o TA=25 C o TA=25 C Switching Speed (s) VCE(SAT), Collector-Emitter Saturation Voltage (V) Phototransistor Optocoupler 20mA 1 5mA 2mA 1mA 10mA IC=0.5mA 0.1 0.01 0.5 1 Ton 10 Tf Tr 1 0.1 50 10 Toff 1 VCE=2V IC=2mA 0 o AV, Voltage Gain (dB) TA=25 C -5 -10 10k -15 1k RL=100 -20 -25 -30 0.1 Collector-Emitter Saturation Voltage vs. Ambient Temperature Voltage Gain vs. Frequency VCE(SAT), Collector-Emitter Saturation Voltage (V) 5 1 10 100 1000 CT Micro Proprietary & Confidential 0.10 IF=20mA IC=1mA 0.08 0.06 0.04 0.02 -55 F, Frequency (kHz) Figure 9 10 RL, Load Resistance(k) Figure 8 IF, Forward Current (mA) Figure 7 -40 -20 0 20 40 60 o 80 100 120 125 TA, Ambient Temperature ( C) Figure 10 Page 5 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Test Circuit IC Input Pulse RL IF Input Output Output Pulse RIN tr ton tf toff Figure 11: Switching Time Test Circuits CT Micro Proprietary & Confidential Page 6 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Package Dimension Dimensions in mm unless otherwise stated Recommended Solder Mask Dimensions in mm unless otherwise stated CT Micro Proprietary & Confidential Page 7 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Marking Information 217RV CT Note: CT 217 R V Y WW K YWWK : Denotes “CT Micro” : Product Number : CTR Rank : VDE Option : Fiscal Year : Work Week : Manufacturing Code Ordering Information CTH217X(V)(Z) X = Part No. (X=A, B, C, D or none) V = VDE Option (V or none) Z = Tape and reel option (T1 or T2) Option Description Quantity T1 Surface Mount Lead Forming – With Option 1 Taping 5000 Units/Reel T2 Surface Mount Lead Forming – With Option 2 Taping 5000 Units/Reel CT Micro Proprietary & Confidential Page 8 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Carrier Tape Specifications Dimensions in mm unless otherwise stated Option T1 Option T2 CT Micro Proprietary & Confidential Page 9 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / -5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max Time 25°C to Peak Temperature 8 minutes max. CT Micro Proprietary & Confidential Page 10 Rev.6 Sep, 2019 CTH217 Series DC Input 4-Pin Half Pitch Mini-Flat Phototransistor Optocoupler DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. ______________________________________________________________________________________ DISCOLORATION MIGHT OCCUR ON THE PACKAGE SURFACE AFTER SOLDERING, REFLOW OR LONG TERM USE. THIS DOES NOT IMPACT THE PRODUCT PERFORMANCE NOR THE PRODUCT RELIABILITY. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical support device or system whose failure to perform implant into the body, or (b) support or sustain life, can be reasonably expected to cause the failure of or (c) whose failure to perform when properly used the life support device or system, or to affect its in accordance with instruction for use provided in safety or effectiveness. the labelling, can be reasonably expected to result in significant injury to the user. CT Micro Proprietary & Confidential Page 11 Rev.6 Sep, 2019