CTMP2-100

Power Inductors - Shielded ctparts.com CTMP2 Series From 0.47 µH to 47 µH Part Number CTMP2_-R47 CTMP2_-1R0 CTMP2_-1R5 CTMP2_-2R2 CTMP2_-3R3 CTMP2_-4R7 CTMP2_-6R8 CTMP2_-100 CTMP2_-150 CTMP2_-220 CTMP2_-330 CTMP2_-470 Not shown at actual size. SPECIFICATIONS Parts are available in ±20% tolerance only CTMP2F Please specify “F” for RoHS Compliant Inductance (µH) .47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 OCL (µH±20%) 0.40 1.02 1.59 2.29 3.58 4.60 7.02 9.95 15.30 21.80 33.70 46.40 L Test Freq. (KHz) 100 100 100 100 100 100 100 100 100 100 100 100 Q Fact. (Typ.) 10 20 25 32 42 46 46 55 65 65 65 65 Q Test Freq. (KHz) 300 300 300 300 300 300 300 300 300 300 300 300 Isat Peak (A) 3.4 2.1 1.7 1.4 1.1 1.0 0.8 0.68 0.54 0.45 0.37 0.31 DCR @20°C (Ω Max.) 0.075 0.103 0.118 0.130 0.156 0.180 0.202 0.240 0.300 0.360 0.556 0.833 Compliant Available RoHS PHYSICAL DIMENSIONS Size mm inches A Max. 5.88 0.231 B Max. 7.50 0.295 C Max. 1.8 0.071 D Max. 5.2 0.205 CHARACTERISTICS Description: SMD Low Profile Power Inductors Applications: Wireless and hand-held equipment applications such as PC cards, cellular telephones, pagers, GPS, and disk drives. Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +125°C Testing: Inductance & Q is tested on an HP4284A at specified frequency. OCL Test Parameters: 100KHz, 0.25 Vrms, 0.0 Adc Packaging: Bulk pack Marking: Marked with inductance code Miscellaneous: RoHS Compliant available. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT 08.29.06 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL