026Y320F5A0B2D

026Y320F5A0B2D

  • 厂商:

    CTS(西迪斯)

  • 封装:

  • 描述:

    026Y320F5A0B2D - Industrial 15/16 inch (24mm) Diameter, 5-Watt, Wirewound Variable Resistors - CTS C...

  • 详情介绍
  • 数据手册
  • 价格&库存
026Y320F5A0B2D 数据手册
Series 026 ® Industrial 15/16" (24mm) Diameter, 5-Watt, Wirewound Variable Resistors Features • Dust-proof construction • Water splash proof construction available • 5-watt power rating • Superior resistance stability in temperature and environment change • Tandem constructions available • Bushing or twist tab mounting power switches • Excellent linearity performance • RoHS compliant • Available with pull-push and rotary Electrical and Mechanical Specifications Resistance Range Linear : 1 ohm through 25K ohms Audio : 20 ohms through 10K ohms Resistance Tolerance Standard : ± 10% Spec ial : Tight er t oleranc e av ailable in mos t res is t anc e v alues Power Rating 5 watts @25°C, 4 watts @ 55°C, derated to no load at 105°C, linear taper (Derating required on two section countols.) Voltage Rating Bushing to Terminals: High pot test, one minute -- 1,000 VAC Operating maximum -- 500 VDC Across End Terminals: 350 VDC maximum, load not to exceed wattage rating. Resistance Tapers Standard: Linear or 20% audio Special: Consult CTS Linearity Standard: 3% linearity Special: Consult CTS Power Switches Rotary Pole-SPST, DPST & SPDT Pull-Push Pole-SPST (Pull-ON, Push-OFF) Rotational Angle Mechanical Rotation: Without switch: 300°±5° With switch: 300°±5° Effective Rotation: Without switch: 280°±5° With switch: 265°±5° Rotational Torque: Standard: 3/4 to 6 in. oz (54 - 432 gf-cm) Special: higher torque models available, consult CTS Operating Temperature -30°C to +85°C (continued on next page) 1-4 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/15/06 Shaft Center to Lug Shaft Information Standard: .438" (11.1mm) Available for round, flatted, knurled, or slot metal shaft Special: .531" (13.5mm) available Diameter: 6.35mm (.250") Consult CTS for custom-made metal and economic plastic shaft Special Features and Constructions Mounting Information Terminals accepting push-on connectors available. Bushing Mount Straight or concentric tandem constructions. Diameter: EIA standard 3/8-32 UNEF-2A thread Can be combined with 450 series, 15/16" (24mm) diameter, to make any combination of straight or concentric tandem Standard length: 9.53mm (.375") or 6.35mm (.250") constructions with or without switch. Consult CTS for custom-made metal and economic plastic Long life constructions available. bushing Twisted Tab Mounting Available Locating Lugs Standard: Left lug with terminals facing inward Available: No lug, right lug or two lugs with terminals facing inward Long Life Construction This construction provides an extended life of 50K and 100K cycles. Consult CTS for details. T026 Metal Shaft, Bushing Mounting, Type "T" Solder Lug Terminals 11.9 .469 MTG. SURFACE 3/8-32 UNEF-2A 3.18 .125 Ø23.8 .937 M AX. 19.8 .780 11.1 .437 CLEARANCE HOLE 4.16±0.08 .164±.003 2.08±0.08 .082±.003 1 3 1.57±0.08 .062±.003 ±0.4 "A" ±.016 ±0.8 "L" ±.031 MAX. 22.2 .875 TERMINAL (3) HOLES Ø2.18 /.086 2 ±0.08 ±0.08 10.41 10.41 .410 .410 ±.003 ±.003 WIPER CW 3 CLOCKWISE CIRCUIT 1.57±0.08 .062±.003 MOUNTING HOLE DETAIL 2 CCW 1 DIMENSION: mm inch X026 / Y026 Metal Shaft, Bushing Mounting, Printed Circuit Type X/Y Terminals MTG. SURFACE "A" ±0.4 ±.016 11.1 .437 3.18 .125 Ø23.8 .937 MTG. SURFACE REF. 2.03±0.05 3.68 .080±.002 .145 Ø2.08±0.05 .082±.002 (6) HLS. 3/8-32NEF-2A 4.0 .156 1 2 3 X=17.5 .687 Y=22.0 .867 TYP. 7.92 .312 MOUNTING HOLE DETAIL 2 CCW 1 CLOCKWISE CIRCUIT WIPER CW 3 "L"±0.8 ±.031 TYP. 7.92 .312 4.9 .191 DIMENSION: mm inch 2-4 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/15/06 U026 Metal Shaft, Bushing Mounting, Printed Circuit Type “U” Formed Terminals MTG. SURFACE CLEARANCE HOLE 11.1 .437 3.18 .125 11.9 .469 4.16±0.08 .164±.003 (2) (2) (2) Ø23.8 .937 1.57±0.08 .062±.003 ±0.08 10.41 .410 ±.003 14.83 .58 3/8-32 UNEF-2A ±0.4 "A" ±.016 ±0.8 "L" ±.031 1 2 3 MAX. 22.2 .875 (2) MOUNTING HOLE DETAIL 7.87 .31 2 CCW 1 CLOCKWISE CIRCUIT WIPER CW 3 Ø2.54 (3) .1 DIMENSION: mm inch V026 Metal Shaft, Bushing Mounting, Printed Circuit Type “V” Formed Terminals 4.16±0.08 .164±.003 11.9 .469 MTG. SURFACE 3/8-32 UNEF-2A Ø 2 3 .8 .9 3 7 3.18 .125 11.1 .437 CLEARANCE HOLE 2.08±0.08 .082±.003 34.5 1.36 REF. 1.57±0.08 .062±.003 3 ±0.08 ±0.08 1.57±0.08 10.41 10.41 .062±.003 .410 .410 ±.003 ±.003 MOUNTING HOLE DETAIL ±0.4 "A" ±.016 ±0.8 "L" ±.031 1 2 1 9 .8 .7 8 0 M A X . 22.2 MAX. .875 2 CCW 1 CLOCKWISE CIRCUIT WIPER CW 3 7.92(2)±0.05 .031±.002 Ø2.08±0.05 .082±.002 2.03±0.05 .080±.002 PCB LAYOUT DIMENSION: mm inch S026 Metal Shaft, Bushing Mounting, Faston Type “S” Formed Terminals MTG. SURFACE CLEARANCE HOLE 4.16±0.08 .164±.003 2.08±0.08 .082±.003 11.9 .469 3/8-32 UNEF-2A 3.18 .125 11.1 .437 Ø 2 3 .8 .9 3 7 1.57±0.08 .062±.003 ±0.4 "A" ±.016 "L" ±0.8 ±.031 1 2 3 8.0 .315 ±0.08 ±0.08 10.41 10.41 .410 .410 ±.003 ±.003 1.57±0.08 .062±.003 MOUNTING HOLE DETAIL 2 CCW 1 CLOCKWISE CIRCUIT WIPER CW 3 22.2 MAX. .875 DIMENSION: mm inch 3-4 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/15/06 VPE026 Metal Shaft, Twist TAB Mounting, Type “V” Formed Terminals MTG. SURFACE 11.9 .469 ±0.8 “L” ±.031 8.33 CENT. .328 MAX. 23.5 .925 MIN. 21.1 .832 7.92(2)±0.05 .031±.002 Ø2.08±0.05 .082±.002 2.03±0.05 .080±.002 PCB LAYOUT 2 CCW 1 2 3 1 CLOCKWISE CIRCUIT WIPER CW 3 CLEARANCE HOLE 4.17 .164 CENT REF. 34.5 1.358 Ø23.8 .937 3.96 .156 CENT. 1.57 .062 10.41 10.41 .410 .410 1.57 .062 MOUNTING HOLE DETAIL DIMENSION: mm inch 22.2 MAX .875 * Consult CTS for details T2-026 Dual-section, Metal Shaft, Bushing Mounting, Type “T” Solder Lug Terminals 23.0 .906 MTG. SURFACE ±0.8 "L" ±.031 (R) (P) CLEARANCE HOLE 11.1 .437 2 CCW 1 WIPER CW 3 6 5 WIPER 3.18 .125 4.16±0.08 .164±.003 2.08±0.08 .082±.003 23.8 .937 MAX 19.8 .780 4 3/8-32 UNEF-2 ±0.4 "A" ±.016 1 4 2 5 3 6 CLOCKWISE CIRCUIT 1.57±0.08 .062±.003 TERMINAL HOLES Ø2.18/.086 * More multi-section models available, consult CTS for details 22.2 .875 MAX. ±0.08 ±0.08 1.57±0.08 10.41 10.41 .062±.003 .410 .410 ±.003 ±.003 MOUNTING HOLE DETAIL DIMENSION: mm inch Ordering Information 026 T 2 20 R SHAFT TRIM 103 B RESIST TOL A - ±10% B - ±20% D - ±5% 1 A 1 SPECIALS 1 - LOCATING LUG LEFT SIDE 2 - LOCATING LUG RIGHT SIDE 3 - NO LOCATING LUG 5 - LOCATING LUG BOTH SIDE TERMINAL STYLE TXYUSOLDER LUG PC .687”(17.5mm) PC .867”(22.0mm) FORMED TO FRONT V - FORMED TO REAR S - FASTON METAL MOUNTING STYLE “A” BUSHING LENGTH: 1/8" INCREMENTS EXAMPLES: 2 3 8 1 .250"(6.35mm) .375"(9.53mm) 1.000"(25.4mm) TWIST TAB MOUNT A - .250"(6.35mm) DIECAST B - .375"(9.53mm) DIECAST - R - ROUND F - FLATTED .375"X.156" (9.53mmX4.0mm) K - KNURLED EIA S148 24 TEETH S - SD SLOT .063" DEEP X.047" WIDE (1.6mmX1.2mm) TAPER 1 - LINEAR 2 - 20%AUD 3 - 20%CCW AUD METAL SHAFT LENGTH “L” FROM MOUNTING SURFACE 1/32"INCREMENTS EXAMPLES: 20 - .625"(6.35mm) 24 - .750"(19.5mm) 28 - .875"(22.2mm) 32 - 1.000"(25.4mm) * CONSULT CTS FOR SPECIAL REQUIREMENTS RESISTANCE CODE EXAMPLES CODE 5A0 501 102 252 502 103 253 RESISTANCE 5 OHMS 500 OHMS 1K 2.5K 5K 10K 25K SWITCHES A - NONE B - SPST C - DPST D - SPDT E - SPST F - SPST FUNCTION ROTARY ROTARY ROTARY PULL-PUSH ROTARY CTS TYPE TGC 027 028 FR-K FR-GC CURRENT RATING 6AMP@125VAC 3AMP@125VAC 1AMP@250VAC 3AMP@125VAC 3AMP@125VAC 3AMP@125VAC 1AMP@250VAC/DC * CONSULT CTS FOR DETAILS 4-4 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/15/06
026Y320F5A0B2D
1. 物料型号: - 型号为Industrial 15/16" (24mm) Diameter, 5-Watt, Wirewound Variable Resistors。

2. 器件简介: - 该器件为5瓦特功率额定的线绕可变电阻器,具有防尘结构、优越的温度和环境变化下的电阻稳定性,并且有防水溅结构可供选择。

3. 引脚分配: - 提供了多种类型的引脚,包括直插或同心串联结构,可与450系列、15/16" (24mm)直径的电阻器组合,形成任意组合的直插或同心串联结构,带或不带开关。

4. 参数特性: - 电阻范围:线性为1欧姆至25千欧姆,音频为20欧姆至10千欧姆。 - 电阻公差:标准为±10%,特殊更紧密的公差可供选择。 - 功率额定:25°C时5瓦特,55°C时4瓦特,105°C时降至无负载,线性变化(双节控制需要降额)。 - 电压额定:端子对端子最高350VDC,不超过功率额定。 - 系列026技术数据。

5. 功能详解: - 标准线性为3%,特殊线性可咨询CTS。 - 功率开关包括旋转式单极单掷、双极单掷和双极双掷,拉推式单极单掷(拉为开,推为关)。

6. 应用信息: - 该文档提供了详细的技术数据和订购信息,适用于需要精确电阻调整和功率控制的应用场合。

7. 封装信息: - 提供了多种轴和安装信息,包括圆形、扁平、滚花或槽形金属轴,直径为6.35mm (.250")。 - 可提供定制金属和经济型塑料轴和轴套。 - 提供了多种特殊特性和结构,包括接受推入式连接器的端子、长寿命结构等。
026Y320F5A0B2D 价格&库存

很抱歉,暂时无法提供与“026Y320F5A0B2D”相匹配的价格&库存,您可以联系我们找货

免费人工找货