194-12MST

Series 194 Side Actuated, Through-Hole DIP Switch   Contact wiping action on make and break Enclosed actuators shield contacts from foreign particles throughout life of switch  Series 194 – gold plated contacts for long-term contact corrosion resistance and with blue housing  RoHS compliant  Optional top tape seal for board spray washing Ordering Information Series Number of Actuator 19420212124 Code 2 3 4 5 6 7 8 9 10 12 Switch Positions B Height Bottom Seal Top Tape Seal M S T XX 1 2 1 S Code BLANK N Code Spec. M Medium actuator (1.14mm/.045”) Shipping Position N E No. of switch positions 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions S Code Top tape seal Blank T No top tape seal Top tape seal RRRTTT T T TTT T Spec. TSS Ship at OFF position Ship at ON position Notes: Contact CTS for other common features not listed. 2020-6-18 Rev. B Page 1 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. T T T Series 194 Side Actuated, Through-Hole DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit SPST 2 12 position 50 100 milliohms Circuit Contact Resistance Insulation Resistance Dielectric Strength Switch Capacitance Initial At end of life Between insulated terminals 500 VAC between adjacent switches Between adjacent closed switches Nonswitching Rating 1000 megohms 1 minute 5.0 pF 100 or 50 mA or VDC Mechanical and Environmental Actuation Life Soldering MSL RoHS Shock Vibration Seal Marking Packaging: Operating Temperature Range Storage Temperature Range 2020-6-18 Rev. B 7000 cycles switching at 50mA and 24 VDC Maximum wave temperature, 260°C for 5 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Bottom seal standard Top tape seal optional Special side marking available-consult CTS Standard anti-static tube packaging -40°C to +85°C -40°C to +85°C Page 2 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 194 Side Actuated, Through-Hole DIP Switch Mechanical Specifications 2020-6-18 Rev. B Page 3 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.