204-212STR

Series 204 Surface Mount Multi-Functional DIP Switch  Coplanarity: 0.1mm/.004” maximum  Enclosed actuators shield contacts from foreign particles throughout life of switch  Available with SPST, SPDT, DPST, 3PST circuitry choices  Optional top tape seal for board spray washing Description Integral terminal and contact molded into thermoset base provides electrostatic discharge protection rated to 22KV. Optimized gold plated contact design incorporates a dimple wiping interface for long-term contact corrosion resistance. Ordering Information Series Number of Number of B Number of Actuator Poles Throws S Switch Positions Height 20420212124 1 2 1 1 2 Code No. of poles Blank 1 2 3 For SPST Single pole Double poles 3 poles 1 Code Spec. Blank 1 2 For SPST Single throw Double throws E 1 Code 2 3 4 5 6 7 8 9 10 12 Bottom Epoxy Seal Top Tape Seal S Tape and Reel T R N E No. of switch positions 1 position (Not available for SPST) 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions Code Blank E LP Code Spec. Blank Standard (0.89mm/.035”) Extended (3.43mm/.135”) (SPST only) Low profile (Flush) (SPST&SPDT only) N Code Blank Code Bottom epoxy seal Blank S No epoxy seal Epoxy seal R Notes: Contact CTS for other common features not listed. Code Blank T 2021-7-13 Rev. D Actuation Preset www.ctscorp.com Spec. Ship at OFF position Ship at ON position ( SPST, DPST&3PST only) Spec. Anti-static tube packaging Tape and reel packaging (SPST, DPST&3PST only. Not available for 7position SPST DIP switch) Top tape seal No top tape seal Top tape seal (Not available for extended actuator) Page 1 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch Electrical Specifications Parameter Circuit Contact Resistance Insulation Resistance Dielectric Strength Actuation Life Switch Capacitance Conditions & Remarks SPST SPDT DPST 3PST Initial At end of life Between insulated terminals 500 VAC between adjacent switches 50mA @ 24 VDC Between adjacent closed switches Nonswitching Rating Coplanarity Min 2 1 1 1 Max 12 6 6 4 50 100 1000 Unit positions milliohms megohms 1 minute 5,000 cycles 5.0 pF 100 or 50 0.1 0.004 mA or VDC mm inch Mechanical and Environmental Soldering MSL RoHS Shock Vibration Seal Marking Packaging: Operating Temperature Range Storage Temperature Range Maximum reflow temperature, 250°C for 30 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Bottom epoxy seal Top tape seal optional Special side or top marking available-consult CTS Standard anti-static tube packaging, optional tape and reel packaging -40°C to +85°C -55°C to +85°C Soldering Profile 2021-7-13 Rev. D Page 2 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch Mechanical Specifications Figure 1 - SPST Figure 2 – SPDT/DPST 2021-7-13 Rev. D Page 3 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch Figure 3 - 3PST Figure 4 – Low Profile Actuators (SPST&SPDT only) 2021-7-13 Rev. D Page 4 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch Figure 5 – Extended Profile Actuators (SPST only) Packing: Tape and Reel Unit: mm SW Section 2 3 4 5 6 8 9 10 12 F Fig I I I II II II II II II Bo W F 7.15 9.69 12.23 14.81 17.35 22.40 24.94 27.48 32.56 24.0 24.0 24.0 32.0 32.0 44.0 44.0 44.0 44.0 11.50 11.50 11.50 14.20 14.20 20.20 20.20 20.20 20.20 S 28.4 28.4 40.4 40.4 40.4 40.4 FIG I 2021-7-13 Rev. D Page 5 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch FIG II SPECIFIED REEL PARTS DIMENSIONS: Unit: mm SW Section F W1 2~4 5~6 8~12 24.4 32.4 44.4 W2 W3 30.4 MAX. 38.4 MAX. 50.4 MAX. 23.9 MIN./27.4 MAX. 31.9 MIN./35.4 MAX. 43.9 MIN./47.4 MAX. (SEE PICTURE FIG) W3 ( INCLUDES FLANGE DISTORTION AT OUTER EDGE) W2 ( MEASURED AT HUB ) 330 100 W1 ( MEASURED AT HUB ) 1. 2. 2021-7-13 Rev. D TAPE SPROCKET HOLE PITCH : 4.0 ± 0.1MM ALL SMT ASSEMBLING MACHINES WILL PICK-UP THE COMPONENT FROM THE POINT, WHICH Page 6 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 204 Surface Mount Multi-Functional DIP Switch 3. IS LOCATED IN THE CENTRE OF TWO ADJACENT SPROCKET HOLES IN FEEDING DIRECTION. THIS MUST BE TAKEK INTO ACCOUNT WHEN DESIGNING THE LOCATION OF THE COMPONENT IN T&R POCKET. 4. RECOMMENDED PART ORIENTATION IN TAPE & REEL POCKET. ORIENT SWITCH TERMINAL #1 TO THE SIDE OF ROUND SPROCKET HOLES, SEE PICTURE BELOW. LENGTH OF TAPE 5. THERE SHALL BE A LEADER OF 390mm MINIMUM WHICH IS SEALED ONTO EMPTY CARRIER TAPE, SEE PICTURE BELOW. 2021-7-13 Rev. D Page 7 of 7 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CTS: 204-10ST 204-121ST 204-122ST 204-123ST 204-124ST 204-125ST 204-126ST 204-12ST 204-212ST 204213ST 204-214ST 204-215ST 204-216ST 204-3ST 204-9ST 204-121LPST 204-122LPST 204-123LPST 204124LPST 204-125LPST 204-126LPST 204-211ST 204-221ST 204-2ST 204-4ST 204-5ST 204-6ST 204-7ST 204-8ST 204-223ST 204-222ST 204-121 204-124STR 204-4LPSTR 204-4STR 204-122STR 204-211STR 204121STR 204-3STR 204-6ES 204-8S 204-8STR 204-212STR 204-213STR 204-126STR 204-122S 204-124S 204-123STR 204-7S 204-121S 204-4S 204-2S 204-313ST 204-6STR 204-2STR 204-8LPST 204-12LPSTR 2044SR 204-5STR 204-8SR 204-5S 204-5SR 204-6S 204-6SR 204-9S 204-9SR 204-9STR 204-10S 204-10SR 204-10STR 204-12S 204-12SR 204-2SR 204-3S 204-3SR 204-214STR