206-211

Series 206 Through-Hole DIP Switch  Available with SPST, SPDT, DPST, 3PST circuit choices  Available with low profile, standard, or extended actuator heights. Consult the ordering information for options.  Blue housing  RoHS compliant  Optional top tape seal for board spray washing  Gold plated contacts Description The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when front row of terminals are connected to ground. The optimized contact design incorporating a dimple-toflat surface wiping interface for long-term contact corrosion resistance, making it the ideal choice for any circuit breaker and HVAC applications. Ordering Information Series Number of Poles 206- 1 20212124 Number of B Number of Throws S Switch Positions 2 1 No. of poles Blank 1 2 3 For SPST Single pole Double pole 3 poles 1 Spec. Blank 1 2 For SPST Single throw Double throw Top Tape Seal E S T 1 2 3 4 5 6 7 8 9 10 12 1 position 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions Code Spec. Blank Standard (0.89mm/.035”) Extended (3.43mm/.135”) (SPST only) Low profile (Flush) (SPST & SPDT only) E LP Code Bottom epoxy seal Blank No epoxy seal Epoxy seal (Required for 206-1S) S Notes: Actuation Preset N E Code No. of switch positions Code Bottom Epoxy Seal 1 2 Code Actuator Height 1.Contact CTS for other common features not listed. Code BLANK N Spec. Ship at OFF position Ship at ON position (SPST, DPST & 3PST only) Code Top tape seal Blank No top tape seal Top tape seal (Not available for extended actuator or 1-position SPST DIP switch) T 2. Not available in a Double Pole Double Thow (DPDT) construction 2020-12-16 Rev. G Page 1 of 5 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206 Through-Hole DIP Switch Electrical Specifications Parameter Contact Resistance Insulation Resistance Dielectric Strength Switch Capacitance Conditions & Remarks Initial At end of life Between insulated terminals 500 VAC between adjacent switches Between adjacent closed switches Min 1000 Nonswitching Rating Circuit SPST SPDT DPST 3PST Max 50 100 1 1 1 1 Unit milliohms Megohms 1 minute 5.0 pF 100 or 50 12 6 6 4 mA or VDC Position Position Position Position Mechanical and Environmental Actuation Life (206) Soldering Shock Vibration Seal Marking Packaging: Operating Temperature Range Storage Temperature Range 2020-12-16 Rev. G 10,000 cycles switching 50mA @ 24VDC Maximum wave temperature, 260°C for 5 seconds Per MIL-STD-202F, method 213B, condition A(50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B (.06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Bottom epoxy seal optional Optional top tape seal for board spray washing Special side or top marking available-consult CTS Standard anti-static tube packaging -55°C to +85°C -55°C to +85°C Page 2 of 5 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206 Through-Hole DIP Switch Mechanical Specifications Figure 1 - SPST Figure 2 – SPDT Figure 3 – DPST 2020-12-16 Rev. G Page 3 of 5 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206 Through-Hole DIP Switch Figure 4 - 3PST Figure 5 – Low Profile Actuators (SPST & SPDT only) Figure 6 – Extended Actuators (SPST only) 2020-12-16 Rev. G Page 4 of 5 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206 Through-Hole DIP Switch 2020-12-16 Rev. G Page 5 of 5 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CTS: 206-10LPST 206-121 206-122 206-122ST 206-123 206-123ST 206-124ST 206-125 206-125ST 206-126 20612LPST 206-211 206-211ST 206-212 206-212ST 206-213 206-213ST 206-214ST 206-215 206-215ST 206-216 206-216ST 206-221 206-222 206-222ST 206-223 206-2LPST 206-3LPST 206-411 206-411ST 206-412 206412ST 206-413 206-413ST 206-4LPST 206-5LPST 206-6LPST 206-7LPST 206-8LPST 206-9LPST 206-2 2062S 206-2E 206-2ES 206-3S 206-3E 206-3ES 206-4S 206-4E 206-4ES 206-5 206-5S 206-5E 206-5ES 206-6S 206-6ST 206-6E 206-6ES 206-7 206-7S 206-7E 206-7ES 206-8S 206-8E 206-8ES 206-9 206-9S 206-9E 206-9ES 206-10S 206-10E 206-10ES 206-12 206-12S 206-12E 206-12ES 206-121S 206-122S 206-123S 206124S 206-125S 206-126S 206-211S 206-212S 206-213S 206-214S 206-215S 206-216S 206-221S 206-222S 206-223S 206-312 206-312S 206-312ST 206-411S 206-412S 206-413S 206-10ST 206-12ST 206-2ST