206-212ST

厂商：
CTS(西迪斯)
封装：
-
描述：
SWITCHSLIDEDIPDPST50MA24V

数据手册：

下载206-212ST.pdf

立即购买

详情介绍
数据手册
价格&库存

206-212ST 数据手册

Series 206/208 DIP ® Multifunctional through hole DIP switches Features Optimized Mechanical Features • Series 206 SPST, SPDT, DPST, DPDT, 3PST or 4PST circuitry choices • Series 206 and Series 208 SPST available in 2 through 10 and 12 positions • Standard 2.54mm (.100") x 7.62mm (.300") DIP centers • Available with flush actuators for low profile SPST applications • Sealed version optional; assures contaminant-free switch operation after flow soldering and cleaning Optimized Contact System • Contact wiping on make and break • Integral terminal and contact locked into thermoset base • Electrostatic discharge shield rated to 22 KV Materials • Series 206 gold-plated contacts for long-term contact corrosion resistance • Series 208 tin-lead contacts • All U.L. 94 V-0 plastics used Series 206 – Premium Gold Plated Contacts Series 208 – Economical Tin-Lead Plated Contacts Electrical and Mechanical Specifications Switch Function Series 206 and 208 single pole single throw Series 206 - single pole double throw - double pole single throw - double pole double throw - 3 pole single throw - 4 pole single throw Switch Contact Resistance Switch Series 206 208 Initial, max. 50 milliohms 100 milliohms End of life, max. 100 millohms 500 millohms Insulation Resistance 1,000 megohms minimum across open switch 1,000 megohms minimum between adjacent closed switches Dielectric Strength 500 VAC minimum for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC Switch Capacitance 5.0 pF maximum between adjacent switches Operating Temperature –55°C to +85°C Actuation Life Series 206: 10,000 cycles switching 50 mA @ 24 VDC Series 208: 2,000 cycles switching 50 mA @ 15 VDC Allowable Solder Time Up to 4 seconds with 260°C solder Vibration Per MIL-STD-202F, method 204D, condition B with no contact inconsistencies greater than 1 microsecond Shock Per MIL-STD-202F, method 213B, condition A with no contact inconsistencies greater than 1 microsecond Sealing Bottom epoxy seal optional Top tape seal optional Marking Special side or top markingTechnical Data SheetCTS available-consult 1448C Technical Data Sheet 4206D CTS CORPORATION / MANUFACTURER OF RELIABLE ELECTRONIC COMPONENTS SPST – Series 206 and Series 208 DIMENSION: MM INCH SPDT – Series 206 DIMENSION: MM INCH DPST – Series 206 DIMENSION: MM INCH DPDT – Series 206 DIMENSION: MM INCH 3PST – Series 206 DIMENSION: MM INCH 4PST – Series 206 DIMENSION: MM INCH Low Profile Actuators – Series 206 and Series 208, SPST DIMENSION: MM INCH Extended Actuators – Series 206, SPST DIMENSION: MM INCH Part Numbering Information OPTIONS XXX Series 206 Series 208 — X X Number of Throws XX (RA) X Actuator Length LP — Low Profile Option on SPST 206/208 product E — Extended Length Option on SPST 206 product S Bottom Epoxy Seal Available on all 206/208 product T Top Tape Seal Available with all standard or low profile actuators Number of Poles Number of Positions Ordering Information “A” Overall Dimensions 7.26 / .286 9.80 / .386 12.34 / .486 14.88 / .586 17.42 / .686 19.96 / .786 22.50 / .886 25.04 / .986 27.58 / 1.086 32.66 / 1.286 7.26 / .286 12.34 / .486 17.42 / .686 22.50 / .886 27.58 / 1.086 32.66 / 1.286 7.26 / .286 12.34 / .486 17.42 / .686 22.50 / .886 27.58 / 1.086 32.66 / 1.286 12.34 / .486 22.50 / .886 32.66 / 1.286 9.80 / .386 17.42 / .686 25.04 / .986 32.66 / 1.286 12.34 / .486 22.50 / .886 32.66 / 1.286 Number of Switch Sections 2 3 4 5 6 7 8 9 10 12 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 1 2 3 4 1 2 3 Actuation SPST SPST SPST SPST SPST SPST SPST SPST SPST SPST SPDT SPDT SPDT SPDT SPDT SPDT DPST DPST DPST DPST DPST DPST DPDT DPDT DPDT 3PST 3PST 3PST 3PST 4PST 4PST 4PST Part Number 206/208-2 206/208-3 206/208-4 206/208-5 206/208-6 206/208-7 206/208-8 206/208-9 206/208-10 206/208-12 206-121 206-122 206-123 206-124 206-125 206-126 206-211 206-212 206-213 206-214 206-215 206-216 206-221 206-222 206-223 206-311 206-312 206-313 206-314 206-411 206-412 206-413 Both Bottom and Top Sealed 206/208-2ST 206/208-3ST 206/208-4ST 206/208-5ST 206/208-6ST 206/208-7ST 206/208-8ST 206/208-9ST 206/208-10ST 206/208-12ST 206-121ST 206-122ST 206-123ST 206-124ST 206-125ST 206-126ST 206-211ST 206-212ST 206-213ST 206-214ST 206-215ST 206-216ST 206-221ST 206-222ST 206-223ST 206-311ST 206-312ST 206-313ST 206-314ST 206-411ST 206-412ST 206-413ST Low Profile Both Bottom and Top Sealed 206/208-2LPST 206/208-3LPST 206/208-4LPST 206/208-5LPST 206/208-6LPST 206/208-7LPST 206/208-8LPST 206/208-9LPST 206/208-10LPST 206/208-12LPST Order From: CTS CORPORATION, ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart, Indiana 46514 North America Toll Free (888) 287-4690 / (219) 296-6700 / FAX: (219) 293-1240 http://www.ctscorp.com CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road (Chung Liu Road) / P.O. Box 26-20 Kaohsiung Export Processing Zone / Kaohsiung, Taiwan, Rep. of China (07) 8216145 / FAX: (07) 8417642.8110040 2.5M-6-99I

下载 PDF

206-212ST

### 物料型号 - Series 206 和 Series 208：分别代表两种不同的DIP开关系列，其中Series 206提供高级的金镀层接触点，Series 208提供经济的锡铅镀层接触点。

### 器件简介 - 这些是多功能的通孔DIP开关，具有优化的机械特性和接触系统，包括多种电路选择（SPST, SPDT, DPST, DPDT, 3PST或4PST）以及不同位置的开关（2至10位和12位）。

### 引脚分配 - 标准引脚中心距离为2.54mm (.100") x 7.62mm (.300")。

### 参数特性 - Series 206：初始接触电阻最大值为50毫欧姆，寿命末期最大值为100毫欧姆。 - Series 208：初始接触电阻最大值为100毫欧姆，寿命末期最大值为500毫欧姆。 - 绝缘电阻：至少1,000兆欧姆，无论是在开关打开时还是在相邻关闭开关之间。 - 耐压：至少500V AC，持续1分钟。 - 非开关额定值：100 mA或50 VDC。 - 开关电容：相邻开关之间最大5.0 pF。

### 功能详解 - 提供接触擦拭在开关动作时，整体终端和接触锁定在热固性基座中，防静电放电屏蔽额定22 KV。

### 应用信息 - 这些开关适用于需要物理开关操作的各种电子设备，特别是在需要抗腐蚀和可靠性的场合。

### 封装信息 - 封装材料：Series 206使用金镀层接触点，Series 208使用锡铅接触点，所有产品使用U.L. 94 V-0塑料。 - 操作温度范围：-55°C至+85°C。 - 动作寿命：Series 206为10,000次，Series 208为2,000次。 - 允许的焊接时间：与260°C焊料接触最多4秒。 - 振动和冲击：符合MIL-STD-202F标准。

206-212ST 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“206-212ST”相匹配的价格&库存，您可以联系我们找货

免费人工找货