206-4RAST

Series 206RA Right Angle Panel DIP Switch  Designed for panel applications, saves cost of right angle socket  Available as SPST, SPDT, DPST, 3PST  Optional tape seal for board spray washing  Available with low profile, standard, or extended actuators  Gold Plated Contacts Description The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when the front row of terminals are connected to ground. The optimized gold plated contact design incorporates a dimple-to-flat surface wiping interface for long-term contact corrosion resistance, making the 206RA an ideal choice for many applications. Ordering Information Series Number of Number of B Number of Type of Terminals Poles Throws S Switch Positions 206 20212124 Code Blank 1 2 3 1 2 1 1 2 RA 1 Code For SPST Single pole Double poles 3 poles RA 1 Code Spec. Blank 1 For SPST Single throw Double throws (Single pole only) 2 2020-7-1 Rev. C 2 3 4 5 6 7 8 9 10 12 LP S T N E No. of poles Code Actuator Bottom Top Tape Actuation Height Epoxy Seal Seal Preset No. of switch positions 1 position (Not available for SPST) 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions Spec. Code Right Angle Code Blank E LP Spec. Standard (0.89mm/.035”) Extended (3.43mm/.135”) (SPST only) Low profile (Flush) (SPST&SPDT only) Code Bottom epoxy seal Blank S No epoxy seal Epoxy seal Spec. Ship at OFF position BLANK (SPST, DPST&3PST only) Ship at ON position N (SPST, DPST&3PST only) Code Blank T Top tape seal No top tape seal Top tape seal for Board spray washing (Not available for extended actuator) Page 1 of 4 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206RA Right Angle Panel DIP Switch Electrical Specifications Parameter Circuit Contact Resistance Insulation Resistance Dielectric Strength Switch Capacitance Conditions & Remarks SPST SPDT DPST 3PST Initial At end of life Between insulated terminals 500 VAC between adjacent switches Between adjacent closed switches Nonswitching Rating Min 2 1 1 1 Max 12 6 6 4 50 100 1000 Unit position milliohms megohms 1 minute 5.0 pF 100 or 50 mA or VDC Mechanical and Environmental Actuation Life Soldering MSL RoHS Shock Vibration Seal Marking Packaging: Operating Temperature Range Storage Temperature Range 2020-7-1 Rev. C 10,000 cycles switching 50mA @ 24 VDC Maximum wave temperature, 260°C for 5 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU and 2015/863/EU Per MIL-STD-202F, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Bottom epoxy seal optional Tape seal optional Special side or top marking available-consult CTS Standard anti-static tube packaging -55°C to +85°C -40°C to +85°C Page 2 of 4 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206RA Right Angle Panel DIP Switch Mechanical Specifications Figure 1 – SPST Please find switch body dimensions of 206RA DIP switches with SPDT, DPST, 3PST circuitry on the 206 series data sheet. 2020-7-1 Rev. C Page 3 of 4 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206RA Right Angle Panel DIP Switch 2020-7-1 Rev. C Page 4 of 4 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.