209-12MSTFD

Series 209/210 Through-Hole DIP Switch  Available with low profile, medium, and extended height actuators  Series 209 – premium gold plated beryllium copper contacts  Series 210 – economical gold flash beryllium copper contacts  Low profile body  RoHS compliant  Optional top tape seal for board spray washing Description These versatile, low profile switches, are available with auto-insertable or hand-insertable terminal styles. The switches feature a positive detent feature separate from the contactor so it does not deflect during actuation. The molded body paired with the optional top tape seal provides optimum protection during soldering processes that includes board spray washing. This versatile switch is an ideal choice for most SPST applications. Ordering Information Series Positions Number of Actuator Switch Height B 209/210- Code 2 3 4 5 6 7 8 9 10 12 XX No. of switch positions 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions Bottom Seal M Code E M LP Top Tape Seal S Shipping Position Terminal Type S T Spec. F Code Extended height actuator (0.6mm/.024”) Medium actuator (0.25mm/.010”) Low profile (Flush) BLANK F D Spec. Ship at ON position Ship at OFF position Code BLANK D Spec. Auto-insertable terminal Straight terminal Code Top tape seal Blank No top tape seal Top tape seal ( Not available on extended actuator) T Notes: Contact CTS for other common features not listed. 2020-7-1 Rev. E Page 1 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 209/210 Through-Hole DIP Switch Electrical Specifications Parameter Operating Temperature Range Conditions & Remarks Min Max Unit -40 +85 °C 2 12 positions Switch Function Circuit Contact Resistance (209) Contact Resistance (210) Insulation Resistance Dielectric Strength Actuation Life (209) Actuation Life (210) Switch Capacitance SPST Initial At end of life Initial At end of life Between insulated terminals 500 VAC between adjacent switches 100mA @ 20 VDC or .1mA @ 5 VDC(dry circuit) 100mA @ 20 VDC or .1mA@5 VDC(dry circuit) Between adjacent closed switches Non-switching Rating 25 50 100 500 1000 milliohms milliohms megohms 1 minute 2,000 cycles 1,000 cycles 5.0 pF 100 or 50 mA or VDC Mechanical and Environmental Soldering MSL RoHS Shock Vibration Seal Marking Packaging: Storage Temperature Range 2020-7-1 Rev. E Maximum wave temperature, 260°C for 5 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A (50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B (.06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Bottom seal standard, optional top tape seal for board spray washing Special top marking available-consult CTS Standard anti-static tube packaging -40°C to +85°C Page 2 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 209/210 Through-Hole DIP Switch Mechanical Specifications Series 209 / 210 Contact Features 2020-7-1 Rev. E Page 3 of 3 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.