Series 218 SMT DIP
®
SMT Half Pitch DIP Switch–Auto Placeable
Features
Optimized Mechanical Features • Removable tape seal to withstand IR vapor phase or wave soldering temperatures and board washing • Gull-wing and "J" bend terminal configurations • Low profile actuators prevent accidental actuation • SPST configuration available Optimized Contact System • Redundant, wiping contact • Contactor does not deflect during actuation • 0.6 mm/.024" actuator travel Materials • • • • Gold plated beryllium copper contacts Gold flash coated terminals High temperature materials (UL94V-0) RoHS Compliant
Electrical and Mechanical Specifications
Sw i t c h Fu n c t i o n SPST - 2, 4, 6, 8, 12 positions Sw i t c h Co n t ac t Res i s t an ce 100 milliohms maximum initial 100 milliohms maximum at end of life In s u l at i o n Res i s t an c e 100 megohms minimum between insulated terminals Di el ec t r i c St r en g t h 350 VAC for 1 minute between adjacent swithces No n s w i t c h i n g Rat i n g 100 mA or 50 VDC maximum Sw i t c h Cap ac i t an c e 10 pF maximum between adjacent closed switches Op er at i n g Tem p er at u r e - 55°C to +85°C A c t u at i o n L i f e 1,000 cycles switching 25 mA @ 24 VDC Co p l an ar i t y Coplanarity of 0.1mm/.004" maximum Allowable Solder Time Up to 60 seconds at 260°C Vi b r at i o n Per MIL-STD-202G, method 204D, condition B (.06" or 15G’s between 10 HZ to 2 KHz) with no contact inconsistencies greater than 1 microsecond. Sh o c k Per MIL-STD-202G, method 213B, condition A (50G’s) with no contact inconsistencies greater than 1 microsecond. Seal i n g Standard bottom seal Optional top tape seal Mar k i n g Special marking available-consult CTS Packaging Standard : Anti-static tube packaging Optional : Tape and reel packaging
1-2 CTS Electronic Components
© 2008 CTS Corporation. All rights reserved. Information subject to change.
www.ctscorp.com
2/19/08
CTS SERIES 218LPJ - "J" Bend Terminal
ON CTS
5.8 .228 2.7 MAX. .106
DIM "A"
TRAVEL
0.6 .024
REF.
1
2
11
12
1.27 .050
TYP.
TYP. 0.45 .018
0.9 .035 3.20±0.15 .126±.006 6.05 .238
+0.15 -0.08 +.006 -.003
MOUNTING SURFACE
SURFACE MOUNT PAD LAYOUT
TYP. 1.27 .050 0.51 .021 1.27 .050
TABLE 1 NO. OF SWITCH POSITIONS 2 4 6 8 10 12 "A" OVERALL DIMENSIONS 3.71/.146 6.25/.246 8.79/.346 11.33/.446 13.87/.546 16.41/.646
5.37 .211
0.76 .030
CTS SERIES 218LP - Gull Wing Terminal
ON CTS
5.80 .228 2.65 MAX. .104
DIM "A"
STAND OFF
0.10±0.10 .004±.004
TRAVEL 0.6 REF. .024
1
2
11
12
TYP. 1.27 .050
TYP.
0.5 .020 8.44±0.20 .332±.008
MOUNTING SURFACE
0.45 .018
SURFACE MOUNT PAD LAYOUT
TYP. 1.27 .050 0.51 .020 1.27 .050
TABLE 2 NO. OF SWITCH POSITIONS 2 4 6 8 10 12 "A" OVERALL DIMENSIONS 3.71/.146 6.25/.246 8.79/.346 11.33/.446 13.87/.546 16.41/.646
DIMENSION: mm inch
8.89 .350
0.76 .030
Ordering Information
218 – 12 LP S T J R F
BLANK: SHIP AT ON POSITION F: SHIP AT OFF POSITION BLANK : ANTI-STATIC TUBE PACKAGING R : TAPE AND REEL PACKAGING BLANK : GULL WING TERMINAL J: J BEND TERMINAL BLANK : NO TOP TAPE SEAL T : TOP TAPE SEAL
XX: NO. OF POSITIONS LP: LOW PROFILE ACTUATOR S: BOTTOM SEAL
© 2008 CTS Corporation. All rights reserved. Information subject to change. CTS Electronic Components
www.ctscorp.com
2/19/08
很抱歉,暂时无法提供与“218-12LPSTRF”相匹配的价格&库存,您可以联系我们找货
免费人工找货