218-4LPSJ

Series 218 Half Pitch, SMD DIP Switch  Removable tape seal to withstand IR vapor phase or wave soldering temperatures, and board washing  Gull-wing and “J”bend terminal configurations  Low profile actuators prevent accidental actuation  SPST configuration available  0.6mm/.024” actuator travel  Optional top tape seal for board spray washing Description Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact type design allows to be used at mini size application. Optional sealed structure is optimized for board washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems Ordering Information Series Number of Switch Positions 21820212124 Code 2 4 6 8 10 12 Low Profile B Actuator 12 1 Bottom Epoxy Seal Top Tape Seal Terminal Type Packaging Type Actuation Preset S T J R F LP 2 1 No. of switch positions 2 positions 4 positions 6 positions 8 positions 10 positions 12 positions E Code Blank T Top tape seal No top tape seal Top tape seal Code Blank R Code Spec. Blank J Gull wing terminal J bend terminal Spec. Anti-static tube packaging Tape & reel packaging Code Spec. Blank Ship at ON position F Ship at OFF position Notes: Contact CTS for other common features not listed. 2020-7-1 Rev. B Page 1 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Electrical Specifications Parameter Circuit Contact Resistance Insulation Resistance Dielectric Strength Actuation Life Switch Capacitance Conditions & Remarks SPST Initial At end of life Between insulated terminals 350 VAC between adjacent switches 25mA @ 24 VDC Between adjacent closed switches Nonswitching Rating Min 2 Max 12 100 100 100 Unit position milliohms megohms 1 minute 1,000 cycles 10 pF 100 or 50 mA or VDC Mechanical and Environmental Soldering MSL RoHS Shock Vibration Coplanarity Seal Marking Packaging: Operating Temperature Range Storage Temperature Range Maximum reflow temperature, 250°C for 30 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202G, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202G, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond 0.1mm/.004” maximum Bottom epoxy seal standard Top tape seal optional Special marking available-consult CTS Standard anti-static tube packaging Optional tape and reel packaging -55°C to +85°C -55°C to +85°C Soldering Profile 2020-7-1 Rev. B Page 2 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Mechanical Specifications Figure 1 – Surface Mount J Bend Terminal Figure 2 – Surface Mount Gull Wing Terminal 2020-7-1 Rev. B Page 3 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch Packing: Tape and Reel Unit: mm SW Section F Fig 2 4 6 8 10 12 I I I I I I Bo W F 4.51 7.05 9.75 12.13 14.67 17.22 16.0 16.0 16.0 24.0 24.0 24.0 7.50 7.50 7.50 11.50 11.50 11.50 SPECIFIED REEL PARTS DIMENSIONS: Unit: mm SW Section F W1 2 4 6 8 10 12 16.4 16.4 16.4 24.4 24.4 24.4 W2 22.4 MAX. 22.4 MAX. 22.4 MAX. 30.4 MAX. 30.4 MAX. 30.4 MAX. W3 15.9 MIN./19.5 MAX. 15.9 MIN./19.5 MAX. 15.9 MIN./19.5 MAX. 23.9 MIN./27.4 MAX. 23.9 MIN./27.4 MAX. 23.9 MIN./27.4 MAX. W3 ( INCLUDES FLANGE DISTORTION AT OUTER EDGE) W2 ( MEASURED AT HUB ) 100 330 W1 ( MEASURED AT HUB) 2020-7-1 Rev. B Page 4 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch FEEDING DIRECTION 2020-7-1 Rev. B Page 5 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 6 of 6 © 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CTS: 218-12LPST 218-4LPSTR 218-6LPSTR 218-6LPSTJ 218-8LPSTR 218-8LPSTJ 218-10LPSTR 218-10LPSTJ 218-12LPSTR 218-12LPSTJ 218-10LPST 218-2LPST 218-2LPSTJ 218-2LPSTR 218-4LPST 218-6LPST 2188LPST 218-4LPSJF 218-6LPSTJRF 218-4LPSTJR 218-4LPSTJ 218-2LPSTF 218-4LPSTRF 218-6LPS 2184LPSJRF 218-4LPS 218-8LPS 218-2LPS 218-4LPSJ 218-4LPSTF 218-6LPSTRF 218-2LPSTRF 218-8LPSTRF 218-06LPSTJF 218-2LPSTJRF 218-8LPSTJRF 218-10LPSRF 218-10LPSTF 218-8LPSTF 218-12LPSTJRF 2182LPSR 218-6LPSF 218-8LPSRF 218-12LPSJRF 218-4LPSR 218-4LPSRF 218-12LPSJR 218-12LPSTRF 2182LPSTJR 218-6LPSJ 218-8LPSF 218-8LPSTJR 218-10LPS 218-10LPSTJF 218-2LPSTJF 218-6LPSJF 21810LPSJRF 218-12LPSF 218-8LPSJR 218-10LPSTJRF 218-12LPSR 218-12LPSRF 218-2LPSF 218-2LPSJ 2188LPSJ 218-12LPSJ 218-12LPSTJR 218-2LPSJRF 218-4LPSJR 218-8LPSR 218-10LPSTRF 218-6LPSJR 2186LPSJRF 218-10LPSF 218-8LPSJF 218-10LPSR 218-12LPSJF 218-2LPSRF 218-6LPSTJF 218-4LPSF 2184LPSTJF 218-6LPSR 218-6LPSRF 218-6LPSTF 218-10LPSJF 218-10LPSJR 218-12LPS 218-12LPSTF 21812LPSTJF 218-4LPSTJRF 218-8LPSJRF 218-8LPSTJF 218-2LPSJF 218-2LPSJR 218-10LPSTJR 218-10LPSJ 218-6LPSTJR 218-8LPSTROFF