218-6LPSJF

Series 218 SMT DIP ® SMT Half Pitch DIP Switch–Auto Placeable Features Optimized Mechanical Features • Removable tape seal to withstand IR vapor phase or wave soldering temperatures and board washing • Gull-wing and "J" bend terminal configurations • Low profile actuators prevent accidental actuation • SPST configuration available Optimized Contact System • Redundant, wiping contact • Contactor does not deflect during actuation • 0.6 mm/.024" actuator travel Materials • • • • Gold plated beryllium copper contacts Gold flash coated terminals High temperature body and actuator materials RoHS Compliant Electrical and Mechanical Specifications Switch Function SPST－2,4,6,8,10, and 12 positions Switch Contact Resistance 100 milliohms maximum initial 100 milliohms maximum at end of life Insulation Resistance 1,000 megohms minimum across open switch 1,000 megohms minimum between adjacent closed switches Dielectric Strength 300 VAC maximum for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 10 pF maximum between adjacent closed switches Operating Temperature - 55°C to +85°C Actuation Life 1,000 cycles switching 25 mA @ 24 VDC Coplanarity Coplanarity of 0.1mm/.004" maximum Allowable Solder Time IR and Vapor Phase - up to 60 seconds at 260°C Wave - up to 5 seconds at 260°C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15G’s between 10 HZ to 2 KHz) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50G’s) with no contact inconsistencies greater than 1 microsecond. Sealing Standard bottom seal Optional top tape seal Marking Special marking available-consult CTS Packaging Standard : Anti-Static tube Packaging Optional : Tape and Reel Packaging RoHS Compliance Compliant with European Union RoHS Directive 1-2 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. 6/30/06 www.ctscorp.com CTS SERIES 218LPJ - "J" Bend Terminal 5.8 .228 CTS ON DIM "A" 2.7 MAX. .106 TRAVEL 0.6 .024 REF. 2 1 11 0.9 .035 3.20±0.15 .126±.006 12 0.18±0.10 .007±.004 TYP. 0.45 .018 TYP. 1.27 .050 6.05 .238 SURFACE MOUNT PAD LAYOUT TYP. 1.27 .050 +0.15 -0.08 +.006 -.003 TABLE 1 NO. OF SWITCH POSITIONS 1.27 .050 0.51 .021 MOUNTING SURFACE 6.60 .260 "A" OVERALL DIMENSIONS 2 3.71/.146 4 6 6.25/.246 8.79/.346 11.33/.446 8 10 12 0.76 .030 13.87/.546 16.41/.646 CTS SERIES 218LP - Gull Wing Terminal 5.80 .228 CTS ON 2.65 .104 TRAVEL 0.6 REF. .024 2 1 11 DIM "A" STAND OFF MAX. 0.10±0.10 .004±.004 12 TYP. 1.27 .050 MOUNTING SURFACE 0.5 .020 0.18±0.10 .007±.004 TYP. 0.45 .018 8.44±0.20 .332±.008 SURFACE MOUNT PAD LAYOUT TYP. 1.27 .050 0.51 .020 TABLE 2 NO. OF SWITCH POSITIONS 1.27 .050 8.89 .350 "A" OVERALL DIMENSIONS 2 3.71/.146 4 6 8 6.25/.246 8.79/.346 11.33/.446 10 12 13.87/.546 16.41/.646 DIMENSION: 0.76 .030 mm inch Ordering Information 218 – 12 LP S T J R – F BLANK: SHIP AT ON POSITION F: SHIP AT OFF POSITION XX: # OF POSITIONS LP: LOW PROFILE ACTUATOR S: BOTTOM SEAL(Standard) R : TAPE AND REEL PACKAGING BLANK : ANTI-STATIC TUBE PACKAGING J: J BEND TERMINAL(Optional) BLANK : GUILLWING TERMINAL T: TOP TAPE SEAL(Optional) 2-2 CTS Electronic Components © 2006 CTS Corporation. All rights reserved. Information subject to change. 6/30/06 www.ctscorp.com