Series 219
SMD DIP Switch
Removable tape seal to withstand IR vapor phase or
wave soldering temperatures, and board washing
Gull-wing and “J”bend terminal configurations
Available low profile, medium, and extended height
actuators
SPST configuration available
0.6mm/.024” actuator travel
Optional top tape seal for board spray washing
Description
Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact
type design allows to be used at small size application. Optional top tape sealed structure is optimized for board
washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems.
Ordering Information
Series
Number of
Switch Positions
21920212124
Actuator
Height
12
1
Code
No. of switch
positions
2
3
4
5
6
7
8
9
10
12
2 positions
3 positions
4 positions
5 positions
6 positions
7 positions
8 positions
9 positions
10 positions
12 positions
B
Bottom
Seal
LP
2
S
T
1
Blank
T
Code
M
LP
Terminal
Type
J
Packaging
Type
R
Spec.
Extended height actuator
(0.6mm/.024”)
Medium actuator
(0.25mm/.010”)
Low profile (Flush)
2021-3-12 Rev. C
F
Top tape seal
No top tape seal
Top tape seal (Not
available on extended
actuator
Code
Blank
R
Code
Spec.
Blank
J
Gull wing terminal
J bend terminal
Spec.
Anti-static tube packaging
Tape & reel packaging
Code
Notes: Contact CTS for other common features not listed.
Actuation
Preset
E
Code
E
Top Tape
Seal
Blank
F
Spec.
Ship at ON position
Ship at OFF position
Page 1 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Electrical Specifications
Parameter
Circuit
Contact Resistance
Insulation Resistance
Dielectric Strength
Actuation Life
Switch Capacitance
Conditions & Remarks
SPST
Initial
At end of life
Between insulated terminals
500 VAC between adjacent
switches
100mA @ 20 VDC
0.1mA @ 5 VDC (dry circuit)
Between adjacent closed
switches
Nonswitching Rating
Min
2
Max
12
25
50
1000
Unit
position
milliohms
megohms
1
minute
2,000
cycles
5
pF
100
or
50
mA
or
VDC
Mechanical and Environmental
Soldering
MSL
RoHS
Shock
Vibration
Coplanarity
Seal
Marking
Packaging:
Operating Temperature
Range
Storage Temperature
Range
Maximum reflow temperature, 250°C for 30 seconds
Level 1
Lead-Free. Fully compliant to RoHS Directive 2011/65/EU
Per MIL-STD-202F, method 213B, condition A( 50G’s)
with no contact inconsistencies greater than 1 microsecond
Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with
no contact inconsistencies greater than 1 microsecond
0.1mm/.004” maximum
Bottom epoxy seal standard
Top tape seal optional
Special marking available-consult CTS
Standard anti-static tube packaging
Optional tape and reel packaging
-55°C to +85°C
-55°C to +85°C
Soldering Profile
2021-3-12 Rev. C
Page 2 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Mechanical Specifications
Figure 1 – Surface Mount J Bend Terminal
2021-3-12 Rev. C
Page 3 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
Figure 2 – Surface Mount Gull Wing Terminal
Packing: Tape and Reel
Unit: mm
SW Section
2
3
4
5
6
7
8
9
10
12
2021-3-12 Rev. C
F Fig
I
I
I
I
I
II
II
II
II
II
Bo
7.50
10.00
12.50
15.10
17.60
20.20
22.70
25.22
27.80
32.90
W
16.0
16.0
24.0
24.0
24.0
32.0
44.0
44.0
44.0
44.0
F
7.5
7.5
11.5
11.5
11.5
14.2
20.2
20.2
20.2
20.2
SO
28.4
40.4
40.4
40.4
40.4
Page 4 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
SPECIFIED REEL PARTS DIMENSIONS:
Unit: mm
SW Section
F W1
2~3
4~6
7
8~12
16.4
24.4
32.4
44.4
W2
22.4 MAX.
30.4 MAX.
38.4 MAX.
50.4 MAX.
W3
15.9 MIN./19.5 MAX.
23.9 MIN./27.4 MAX.
31.9 MIN./35.4 MAX.
43.9 MIN./47.4 MAX.
W3 ( INCLUDES FLANGE DISTORTION
AT OUTER EDGE)
W2 ( MEASURED AT HUB )
2021-3-12 Rev. C
100
330
Page 5 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
1. TAPE SPROCKET HOLE PITCH : 4.0 ± 0.1MM
2. ALL SMT ASSEMBLING MACHINES WILL PICK-UP THE COMPONENT FROM THE
POINT, WHICH
3. IS LOCATED IN THE CENTRE OF TWO ADJACENT SPROCKET HOLES IN
FEEDING DIRECTION. THIS MUST BE TAKEK INTO ACCOUNT WHEN DESIGNING
THE LOCATION OF THE COMPONENT IN T&R POCKET.
4. RECOMMENDED PART ORIENTATION IN TAPE & REEL POCKET.
ORIENT SWITCH TERMINAL #1 TO THE SIDE OF ROUND SPROCKET HOLES, SEE
PICTURE BELOW.
LENGTH OF TAPE
FEEDING DIRECTION
5. THERE SHALL BE A LEADER OF 390mm MINIMUM WHICH IS SEALED ONTO
EMPTY CARRIER TAPE, SEE PICTURE BELOW.
2021-3-12 Rev. C
Page 6 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Series 219
SMD DIP Switch
FEEDING DIRECTION
2021-3-12 Rev. C
Page 7 of 7
© 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CTS:
219-2MSTR 219-3LPSTR 219-3MSTR 219-5LPSTR 219-5MSTR 219-6LPSTR 219-6MSTR 219-7LPSTR 2197MSTR 219-8LPSTR 219-8MSTR 219-9LPSTR 219-9MSTR 219-10LPSTR 219-10MSTR 219-12LPSTR 21912MSTR 219-10LPST 219-10MST 219-12LPST 219-12MST 219-2LPST 219-2LPSTR 219-2MST 219-3LPST
219-3MST 219-4LPST 219-4MST 219-5LPST 219-5MST 219-6LPST 219-6MST 219-7LPST 219-8LPST 2198MST 219-9LPST 219-4LPSTR 219-4LPSTRF 219-7MST 219-4MSTR 219-9MST 219-6LPSTJ 219-5LPSTJ 2196MSTJ 219-8LPSTJ 219-8LPS 219-6MSTRF 219-4ES 219-3MSTJ 219-2LPSTRF 219-4LPSTJRF 219-4MSTJR
219-6LPS 219-9LPS 219-12ESF 219-9MSTJR 219-2MS 219-2LPSTF 219-8LPSTF 219-2MSTRF 219-4MSTF
219-3LPSTJ 219-8MSTJ 219-4LPSTJR 219-4MS 219-8MS 219-3LPS 219-4MSTRF 219-4LPS 219-4MSTJRF
219-4LPSTP 219-8LPSTRF 219-5LPSTRF 219-6LPSR 219-6LPSTJF 219-3MSTF 219-10LPSTF 219-12LPSJR
219-6LPSJ 219-10MSTJRF 219-5MSTF 219-8MSTF 219-3LPSTRF 219-2ESRF 219-8LPSTJR 219-9LPSTRF
219-2MSTJRF 219-5LPSTJRF 219-8LPSTJRF 219-5MSTJRF 219-5MSTRF 219-6MSJRF 219-7LPSJ 219-7MSR
219-7MSTRF 219-8ESRF 219-8LPSF 219-9ESJRF 219-9ESR 219-9LPSJRF
很抱歉,暂时无法提供与“219-12LPSTR”相匹配的价格&库存,您可以联系我们找货
免费人工找货