219-8LPSTJR

Series 219 SMD DIP Switch  Removable tape seal to withstand IR vapor phase or wave soldering temperatures, and board washing  Gull-wing and “J”bend terminal configurations  Available low profile, medium, and extended height actuators  SPST configuration available  0.6mm/.024” actuator travel  Optional top tape seal for board spray washing Description Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact type design allows to be used at small size application. Optional top tape sealed structure is optimized for board washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems. Ordering Information Series 219- Number of Switch Positions 12 Code No. of switch positions 2 3 4 5 6 7 8 9 10 12 2 positions 3 positions 4 positions 5 positions 6 positions 7 positions 8 positions 9 positions 10 positions 12 positions Actuator Height B Bottom Seal LP S T Code Blank T Code E M LP Top Tape Seal Spec. Extended height actuator (0.6mm/.024”) Medium actuator (0.25mm/.010”) Low profile (Flush) Terminal Type J Packaging Type R 2021-3-12 Rev. C F Top tape seal No top tape seal Top tape seal (Not available on extended actuator Code Blank R Code Spec. Blank J Gull wing terminal J bend terminal Spec. Anti-static tube packaging Tape & reel packaging Code Notes: Contact CTS for other common features not listed. Actuation Preset Blank F Spec. Ship at ON position Ship at OFF position Page 1 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch Electrical Specifications Parameter Circuit Contact Resistance Insulation Resistance Dielectric Strength Actuation Life Switch Capacitance Conditions & Remarks SPST Initial At end of life Between insulated terminals 500 VAC between adjacent switches 100mA @ 20 VDC 0.1mA @ 5 VDC (dry circuit) Between adjacent closed switches Nonswitching Rating Min 2 Max 12 25 50 1000 Unit position milliohms megohms 1 minute 2,000 cycles 5 pF 100 or 50 mA or VDC Mechanical and Environmental Soldering MSL RoHS Shock Vibration Coplanarity Seal Marking Packaging: Operating Temperature Range Storage Temperature Range Maximum reflow temperature, 250°C for 30 seconds Level 1 Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond 0.1mm/.004” maximum Bottom epoxy seal standard Top tape seal optional Special marking available-consult CTS Standard anti-static tube packaging Optional tape and reel packaging -55°C to +85°C -55°C to +85°C Soldering Profile 2021-3-12 Rev. C Page 2 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch Mechanical Specifications Figure 1 – Surface Mount J Bend Terminal 2021-3-12 Rev. C Page 3 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch Figure 2 – Surface Mount Gull Wing Terminal Packing: Tape and Reel Unit: mm SW Section 2 3 4 5 6 7 8 9 10 12 2021-3-12 Rev. C F Fig I I I I I II II II II II Bo 7.50 10.00 12.50 15.10 17.60 20.20 22.70 25.22 27.80 32.90 W 16.0 16.0 24.0 24.0 24.0 32.0 44.0 44.0 44.0 44.0 F 7.5 7.5 11.5 11.5 11.5 14.2 20.2 20.2 20.2 20.2 SO 28.4 40.4 40.4 40.4 40.4 Page 4 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch SPECIFIED REEL PARTS DIMENSIONS: Unit: mm SW Section F W1 2~3 4~6 7 8~12 16.4 24.4 32.4 44.4 W2 22.4 MAX. 30.4 MAX. 38.4 MAX. 50.4 MAX. W3 15.9 MIN./19.5 MAX. 23.9 MIN./27.4 MAX. 31.9 MIN./35.4 MAX. 43.9 MIN./47.4 MAX. W3 ( INCLUDES FLANGE DISTORTION AT OUTER EDGE) W2 ( MEASURED AT HUB ) 100 330 W1 ( MEASURED AT HUB ) 2021-3-12 Rev. C Page 5 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch 1. TAPE SPROCKET HOLE PITCH : 4.0 ± 0.1MM 2. ALL SMT ASSEMBLING MACHINES WILL PICK-UP THE COMPONENT FROM THE POINT, WHICH 3. IS LOCATED IN THE CENTRE OF TWO ADJACENT SPROCKET HOLES IN FEEDING DIRECTION. THIS MUST BE TAKEK INTO ACCOUNT WHEN DESIGNING THE LOCATION OF THE COMPONENT IN T&R POCKET. 4. RECOMMENDED PART ORIENTATION IN TAPE & REEL POCKET. ORIENT SWITCH TERMINAL #1 TO THE SIDE OF ROUND SPROCKET HOLES, SEE PICTURE BELOW. LENGTH OF TAPE 5. THERE SHALL BE A LEADER OF 390mm MINIMUM WHICH IS SEALED ONTO EMPTY CARRIER TAPE, SEE PICTURE BELOW. FEEDING DIRECTION 2021-3-12 Rev. C Page 6 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 219 SMD DIP Switch 2021-3-12 Rev. C Page 7 of 7 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.