222AMVBAR

Series 222A 6.2 x 6.2mm Compact Tactile Switch ▪ Standard through hole and surface mount gull-wing terminal configurations ▪ Compatible with IR reflow, wave, and manual soldering ▪ Compatible with automatic dip-soldering ▪ Variety of operating force and actuator height options Description Excellent tactile feedback provides the user with simple and intuitive operation. The robust internal structure ensures long product life to meet various application requirements. Common product dimensions provide options to match your existing applications. Ordering Information Terminal Type Series 20212124 222A 1 2 M Actuating Direction 1 Actuator B Height “L”E E V Actuator Force A A Code Code M U D Packaging Type A B C Spec. Surface mount gull wing Surface mount U terminal Through hole R Spec. 160 gf, black 260 gf, white 100 gf, blue SIDE ACTUATION (S1) ONLY AVAILABLE WITH 160 gf Code V S1 Code Spec. Vertical Side Spec. Bag packaging (Through hole only) Tape & reel packaging (Surface mount only) BLANK R Combination Code Actuator Height 222AMV 222ADV 222AMS1 222ADS1 222AUV A 4.3 ☆ ☆ ☆ B 5.0 ☆ ☆ C 7.0 ☆ ☆ D 9.5 ☆ ☆ Spec. E F 3.85 8.35 G 6.85 H 5.85 ☆ ☆ ☆ I 8.0 ☆ ☆ J 3.6 ☆ ☆ ☆ ☆ ☆ Notes: Contact CTS for other common features not listed. 222A Rev. F www.ctscorp.com Page 1 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch Electrical Specifications Parameter Conditions & Remarks Min Contact Resistance Between insulated terminals 1 minute between adjacent switches Insulation Resistance Dielectric Strength Max Unit 100 milliohms 100 Nonswitching Rating Megohms 250 VAC 50 or 12 mA or VDC Mechanical and Environmental Soldering Maximum reflow temperature, 260°C for 5 seconds Maximum manual temperature, 350°C for 3 seconds Actuation Life 100 gf 160 gf 260 gf RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU and 2015/863 Operating Force 100±50 gf 160±50 gf 260±50 gf Actuator Strength 3 Kgf maximum Travel 0.25±0.15mm (vertical actuation) Operating Temperature Range -40°C to +85°C Storage Temperature Range -40°C to +90°C Packaging Standard bag packaging for through hole terminal Standard tape and reel packaging for gull wing terminal 1,000,000 1,000,000 200,000 cycles 0.25+0.2 −0.1 mm (side actuation) Soldering Profile 222A Rev. F www.ctscorp.com Page 2 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch Mechanical Specifications Figure 1 – Surface Mount Gull Wing, 222AM, Vertical Actuation Figure 2 – Through-Hole, 222AD, Vertical Actuation 222A Rev. F www.ctscorp.com Page 3 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch Figure 3 – Through-Hole, 222ADS1, Side Actuation Figure 4 –Surface Mount Gull Wing, 222AMS1, Side Actuation 222A Rev. F www.ctscorp.com Page 4 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch Figure 5 – Surface Mount U terminal type, 222AU, Vertical Actuation Packing: Tape and Reel Surface Mount Gull Wing, Top Actuation, 222AMV… The Packing Specifications: Structure and materials: 1. 2. 3. 4. 5. 6. 222A Rev. F No PART NAME MATERIAL ① REEL POLYSTYRENE ② CARRIER TAPE POLYSTYRENE ③ COVER TAPE POLYESTER More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are allowed. Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: www.ctscorp.com Page 5 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch Switch Type Packing Quantity/Reel Dimension “D” 222AMVA 1000 5.3 222AMVB 1000 5.3 222AMVC 550 7.2 222AMVD 400 9.5 222AMVI 400 8.0 Surface Mount Gull Wing, Side Actuation, 222AMS1… The Packing Specifications: Structure and materials: 1. 2. 3. 222A Rev. F No PART NAME MATERIAL ① REEL POLYSTYRENE ② CARRIER TAPE POLYSTYRENE ③ COVER TAPE POLYESTER Packing quantity: 500 pcs/reel More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are allowed. www.ctscorp.com Page 6 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch 4. 5. 6. 7. Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of the carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: Surface Mount U terminal type, Vertical Actuation, 222AUV… The Packing Specifications: Structure and materials: 1. 2. 3. 222A Rev. F No PART NAME MATERIAL ① REEL POLYSTYRENE ② CARRIER TAPE POLYSTYRENE ③ COVER TAPE POLYESTER Packing quantity: 400 pcs/reel More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are allowed. www.ctscorp.com Page 7 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222A Tactile Switch 4. 5. 6. 7. 222A Rev. F Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of the carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: Switch Type Dimension “D” 222AUVC 7.4 222AUVI 8.4 222AUVD 10.0 www.ctscorp.com Page 8 of 8 ©2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.