222CMVBAR

Series 222C 6.2 x 6.2mm Compact Tactile Switch ▪ Surface mount gull wing and J-bend terminal configurations ▪ Compatible with IR reflow and manual soldering ▪ Variety of operating force & actuator height options Ordering Information Series Terminal Type Actuating Direction M V 222C 20212124 1 2 Actuator B Height “L” A Actuation Force Packaging A S R T RRRTTT 1 E Code Spec. M Surface mount gullwing J Surface mount J-bend Code V Code A B Spec. Vertical Code A B C Spec. 2.5mm 3.4mm 3.1mm T T TTT T TSS www.ctscorp.com T Spec. 160 gf, black 260 gf, white Code R Spec. Tape & reel packaging Notes: Contact CTS for other common features not listed. 222C Rev. E T Page 1 of 5 ©2024 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote Series 222C Tactile Switch Electrical Specifications Parameter Conditions & Remarks Min Contact Resistance Between insulated terminals 1 minute between adjacent switches Insulation Resistance Dielectric Strength Max Unit 100 milliohms 100 Nonswitching Rating Megohms 250 VAC 50 or 12 mA or VDC Mechanical and Environmental Soldering Maximum reflow temperature, 260°C for 5 seconds Maximum manual temperature, 350°C for 3 seconds RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Operating Force Actuation Life 160±50 gf 260±50 gf 160 gf: 1,000,000 cycles 260 gf: 500,000 cycles Actuator Strength 3 Kgf maximum Travel 0.25+0.2 −0.1 mm Packaging Standard tape and reel packaging Operating Temperature Range Storage Temperature Range -40°C to +85°C -40°C to +85°C Soldering Profile 222C Rev. E Page 2 of 5 ©2024 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote Series 222C Tactile Switch Mechanical Specifications Figure 1 – 222CM, Surface Mount Gull Wing Figure 2 – 222CJ, Surface Mount J-Bend 222C Rev. E Page 3 of 5 ©2024 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote Series 222C Tactile Switch Packing: Tape and Reel Surface Mount Gull Wing/J Bend, 2.5mm Actuator Height The packing specifications: Structure and materials: No 1. 2. 3. 4. 5. 6. 7. 222C Rev. E PART NAME MATERIAL ① REEL POLYSTYRENE ② CARRIER TAPE POLYSTYRENE ③ COVER TAPE POLYESTER Packing quantity: 2,000 pcs/reel More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are not allowed. Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: Page 4 of 5 ©2024 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote Series 222C Tactile Switch Surface Mount Gull Wing/J Bend, 3.1/3.4mm Actuator Height The packing specifications: Structure and materials: 1. 2. 3. 4. 5. 6. 7. 222C Rev. E No PART NAME MATERIAL ① REEL POLYSTYRENE ② CARRIER TAPE POLYSTYRENE ③ COVER TAPE POLYESTER Packing quantity：1,300 pcs/reel More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage of less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are allowed. Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: Page 5 of 5 ©2024 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote