Series 252
®
Two Axis, Ministick Controller With Optional Momentary Switch
Features • Compact Size (20x21x13mm) • Long Life 1 Million Cycles • Optional momentary switch is operational at all rotations • Sturdy metal case with convenient mounting tabs • RoHS compliant
Pat. No: US 6,353,430 , Taiwan: 128688. Pat. Pending in Japan & China
Electrical and Mechanical Specifications
Potentiometer 1 & 2
Resistance Range 10 K ohms through 200 K ohms Resistance Tolerance Standard: ±30% Special: ±10% and ± 20% available Insulation Resistance 100 Megaohms min @ 250 VDC Rotational Torque of Stick 200 ± 80 gf.cm at 10° deflection Power Rating 0.0125 watt @ 50°C, Derated to no load at 85°C Operating Voltage 50 VAC or 5 VDC maximum Angle of Rotation 60° maximum Life Standard: 1,000,000 cycles Special: Consult CTS
RoHS Compliance Compliant with European Union RoHS Directive
Available Switch
Type Momentary Contact Resistance 100 milliohms max Maximum Contact Resistance 200 milliohms max after 500,000 cycles switching 5mA @ 5VDC Dielectric Strength 250 VAC 50/60 Hz for 1 minute Insulation Resistance 100 Megaohms min @ 100 VDC Operational Force 800±200 g Power Rating 12 VDC, 50 mA maximum Travel 0.9 ± 0.4mm Switch Life 500,000 cycles
1-2 CTS Electronic Components
© 2006 CTS Corporation. All rights reserved. Information subject to change.
www.ctscorp.com
6/20/06
Electrical and Mechanical Specifications
Potentiometer 1 & 2
Operating Temperature -10°C to +70°C Mounting Information PC Terminals Soldering Conditions Wave - up to 5 seconds at 260°C No Solder or flux on component side of board
CTS Series 252
OPERATION ANGLE 53°~63° (ALL DIRECTION) A +0.4 DIM "L" -0.3 .760 +.016 -.012 12.2±0.3 .480±.012 A
11.8 .465
123 CENT. 5.00 .197 1.90 15.50 CENT. .075 .610
6.50 CENT. .256
7.3 .287
CENT. 4.50 .177
Ø1.3+0.1 -0.0 (4) .051 +.004 +0.1 -.000 Ø1.0-0.0 (6) .039 +.004 -.000 1.20±0.05 .047±.002 c a
3.3±0.3 .130±.012
c
a
1
23 3.8±0.3 .150±.012 1.1(4) .043 0.8±0.1(6) .031±.004
d
b
d
b 1.90±0.05 .075±.002 SECTION A-A SCALE : 10X 9.3 .366 11.2 .441 CENT. 16.0 .630
1 CENT. 5.00 .197
23
CENT. 13.30 .524
Ø1.0+0.1 -0.0 (4) HOLES FOR .039+.004 OPTIONAL SWITCH -.000 TERMINALS 3.00 .118
SWITCH CIRCUIT DIAGRAM
VR 1
CENT. 16.0 .630
CENT. 12.0 .472
VR 2
mm DIMENSION: inch
CENT. 9.5 .374
Ordering Information
252
DRIVE ARM LENGTH DIM "L"
LENGTH FROM MOUNTING SURFACE
A
103
C
RESIST TOL A – ±10% B – ±20% C – ±30%
60
N
A
RESISTANCE CODE EXAMPLES CODE 103 203 503 104 124 154 RESISTANCE 10K 20K 50K 100K 120K 150K
TAP CONFIGURATION N – NO TAP T – 4° TAP AT CENTER
A – 19.3mm B – 24.3mm
ROTATIONAL ANGLE 40 – 40º 50 – 50º 60 – 60º
SWITCH CONFIGURATION A – W/O SWITCH B – MOMENTARY SWITCH
2-2 CTS Electronic Components
© 2006 CTS Corporation. All rights reserved. Information subject to change.
www.ctscorp.com
11.2 .441
9.5 .374
MOUNTING HOLE DETAIL VIEWED FROM MOUNTING SIDE
6/20/06
很抱歉,暂时无法提供与“252A103ANA”相匹配的价格&库存,您可以联系我们找货
免费人工找货