285CCDFSAAA4C1

Series 285 Non-Contacting Position Sensor      Compact 22 mm size Extended rotational life (10 Million cycles) Wide temperature range (-40°C to +125°C) Precision linearity (± 0.5% and ± 0.25% options) Dust & water protection (IP50, 54 and 67 options) Applications      Patient platform position feedback Pneumatic control valve position feedback Draw wire position sensors Actuator motor position feedback Foot pedal, twist throttle, steering, and lift & shuttle Ordering Information Series Code Spec. Bushing Shaft Termination A ± 0.5% Length Length B 285 C ± 0.25% Code Spec. C 250 mm wires Code 3 C 3 Shaft Trim 2 Bearing Style P S Linearity Operating Voltage A A Code A B Spec. Code 3/8” L x 3/8” D, 32 UNEF 9 mm L, M10 x 0,75 Code C D 2 3 A B Spec. ± 0.5% ± 0.25% Spec. F L R P Spec. S Sleeve bearing Spec. Flatted (6 mm dia.) Flatted (1/4” dia.) Round (6 mm dia.) Round (1/4” dia.) Rotation Angle 4 RRRTTT T Code 4 5 6 C Locating Lug T T 1 Spec. IP50 IP54 IP67 Code Total EEA Stops Analog output, CW Analog output, CCW Code IP Rating B A B C Spec. 20 mm 25 mm 3/4" 7/8” Code 2019-07-25 Rev. F Output Type Code A B Spec. 3.3V* 5.0V *Available with 360° EEA only. 270° 320° 360° 260° 310° 360° Code 0 1 270° 320° N/A Spec. No lug Left 7,4 mm Page 1 of 4 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285 Non-Contacting Position Sensor Electrical Specifications Sensor Function Output Independent Linearity Hysteresis Output Voltage Output Overvoltage Limits Output Current Output Load Input Voltage Supply Voltage Absolute Limits Supply Current Resolution Dielectric Strength Insulation Resistance Electrostatic Discharge (ESD) Min Typical Max Unit Analog -0.5% 5% -6 -8 5 -10% -18 12 BIT at 360° 1 minute at 500 VDC HBM 1 10 5 10 1000 -4 +0.5% 0.2% 95% +18 +8 Vsup Vsup VDC mA kΩ VDC VDC mA +10% +18 15 750 VDC MegΩ kV +4 Mechanical and Environmental Soldering Total Mechanical Travel Without Stops With End Stops Static Stop Strength Push and Pull Shaft Strength Rotational Life Sleeve Bearing Operating Speed Vibration Rotational Torque Panel Nut tightening Torque IP Rating Marking Packaging Operating Temperature Range Storage Temperature Range Weight Maximum manual temperature, 350°C for 5 seconds 360° continuous 270° or 320° 40 in-oz. min. 13.6 kgf min. 10 Million cycles 120 RPM max. 30 Gs, 50 to 500 Hz 72 gf-cm 25 in-lb 50, 54 or 67 CTS logo, part number, date code Standard anti-static bulk packaging -40°C to +125°C -40°C to +140°C 21 gm All testing is performed at room ambient conditions except as noted. Users should verify device actual performance in their specific applications. This product is compliant to RoHS3 Directive 2011/65/EU & 2015/863 Amendments of Annex II on 31 March 2015. Custom and value-added options available on request. Please contact your sales representative for additional information. 2019-07-25 Rev. F Page 2 of 4 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285 Non-Contacting Position Sensor Mechanical Specifications Series 285 w/Slotted Shaft 2019-07-25 Rev. F Page 3 of 4 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285 Non-Contacting Position Sensor Mechanical Specification Series 285 w/Flatted Shaft Electrical Specification Series 285 Output Graph 2019-07-25 Rev. F Page 4 of 4 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.