285SCFSAAB5A1

Series 285S/N Flange Mount Non-Contacting Position Sensor Compact 45 mm x 22 mm size Hall-effect technology Extended rotational life (10 Million cycles) Wide temperature range (-40°C to +125°C) Precision linearity (± 0.5% and ± 0.25% options) Dust & water protection (IP50, 54 and 67 options)  Single and dual output       Applications      Actuator motor position feedback Medical treatment chair and patient platform position feedback Flow valve position feedback Foot pedal and twist throttle controls Steering and lift & shuttle controls Ordering Information Series 285 Code Shaft Spec. Shaft A Type ± 0.5% Length B S ± 0.25% C Shaft Trim Bearing Style Output Type Linearity Operating Voltage IP Rating Rotation Angle Termination F S A A B 4 C 1 N S Code Code Spec. Code Spec. Shaftless w/Shaft S Sleeve bearing Code Spec. C D 2 3 N 20 mm 25 mm 3/4” 7/8” Shaftless F L R P N 2019-11-18 Rev. C Flatted (6 mm dia.) Flatted (1/4” dia.) Round (6 mm dia.) Round (1/4” dia.) Shaftless Spec. ± 0.5% ± 0.25% Code 4 5 6 Spec. Code Spec. IP50 IP54 IP67 250 mm wires 1 Code Spec. A B C D Code Spec. A B Single analog output, CW Single analog output, CCW Dual analog output, CW Dual analog output, CCW Code A B Spec. 3.3V* 5.0V *Available with 360° EEA only. Code* A B C D Total 270° 320° 360° 200° EEA Stops 260° 310° 360° 125° 270° 320° N/A 200° *Codes A, B, and C available with shaft. Codes D available with shaftless version only. Page 1 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Electrical Specifications Sensor Function Parameter Output Independent Linearity Hysteresis Output Voltage Output Overvoltage Limits Output Current Output Load Input Voltage Supply Voltage Absolute Limits Supply Current Resolution Dielectric Strength Insulation Resistance Electrostatic Discharge (ESD) Condition & Remarks Analog Vsup Vsup 12 BIT at 360° 1 minute 500 VDC HBM Min Typical -0.5 5% -6 -8 5 -10 -18 +1 10 5 10 Max Unit +0.5 0.2 95 +18 +8 % % % VDC mA kΩ VDC VDC mA +10 +18 15 750 1000 -4 +4 VDC MegΩ kV Mechanical and Environmental Parameter Operating Temperature Range Storage Temperature Range Rotational Life Rotational Torque Static Stop Strength Total Mechanical Travel Without Stops With End Stops Operating Speed Vibration Panel Nut Tightening Torque IP Rating Push and Pull Shaft Strength Soldering Condition Marking Packaging Weight Condition & Remarks Min -40 -40 10,000,000 Typical Max +125 +140 72 40 Unit °C °C cycles gf-cm in-oz 360° continuous 320°, 270°, 200° 120 RPM max. 30 Gs, 50 to 500 Hz 25 in-lb maximum 50, 54 or 67 13.6 kgf for 10 seconds Maximum manual temperature, 350°C for 5 seconds CTS logo, part number, date code Standard anti-static bulk packaging 21 gm All testing is performed at room ambient conditions except as noted. Users should verify device actual performance in their specific applications This product is compliant to RoHS3 Directive 2011/65/EU & 2015/863 Amendments of Annex II on 31 March 2015. Custom and value-added options available on request. Please contact your sales representative for additional information. 2019-11-18 Rev. C Page 2 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Mechanical Specifications Series 285S Flange Mount, Single Output, with Shaft See shaft trim options 250.0 ± 50.0 L ± 0.40 See shaft trim options 2019-11-18 Rev. C Page 3 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Mechanical Specifications 250.0 ± 50.0 Series 285N Flange Mount, Single Output, Shaftless 2019-11-18 Rev. C Page 4 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Mechanical Specification Series 285S Flange Mount, Dual Output, with Shaft See shaft trim options 250.0 ± 50.0 L ± 0.40 See shaft trim options 2019-11-18 Rev. C Page 5 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Mechanical Specification 250.0 ± 50.0 Series 285N Flange Mount, Dual Output, Shaftless 2019-11-18 Rev. C Page 6 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Shaft Trim Options F L R P Electrical Specification Series 285 Flange Mount w/Shaft Single Output Graph 2019-11-18 Rev. C Page 7 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 285S/N Flange Mount Non-Contacting Position Sensor Series 285 Flange Mount Shaftless Dual Output Graph 2019-11-18 Rev. C Page 8 of 8 ©2019 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.