4310-019LF

5 6 8 7 This drawing is the property of Tusonix, Inc., and may not be used, reproduced, published or H disclosed to others without expressed authorization by Tusonix Inc. 4 2 3 1 Electrical testing per Tusonix standard test plans and MIL-Std-202 H test methods. DATA SHEET DRAWING G G STRAIGHT KNURL 80 TPI RoHS COMPLIANT DOT F F B E COLOR CODE DOT(S) EPOXY SEAL THIS SIDE. EPOXY NOT TO EXCEED SURFACE. B COLOR CODE DOT(S) D NOTES D 6. END OF LEAD INDICATED TO BE FREE OF BURRS. 7. TUSONIX NON-RoHS COMPLIANT PART NUMBER: 4310-019. TUSONIX RoHS COMPLIANT PART NUMBER: 4310-019LF. CUSTOMER MUST SPECIFY NON-RoHS OR RoHS PART NUMBER WHEN ODERING. 8. COLOR CODE: YELLOW. RoHS COMPLIANT PART MARKED WITH ADDITIONAL GREEN DOT FOR IDENTIFICATION. C Cx (pF) TOL. DC WORKING VOLTAGE 5000 +100% -0% 10 MHz 15 150 I DC I.R. MIN @ 100 VDC 10 GHz 1 GHz 45 100 MHz 30 CIRCUIT DIMENSIONS: ENGLISH UNITS - INCHES METRIC UNITS - [ mm ] 250 VDC 1A 100 DWV C ORIENTATION 55 REV DATE CHG BY CHANGE A 12-02-15 R.C. ORIGINAL RELEASE B 09-29-16 R.C. MODIFIED COLOR DOT PLACEMENT, NOTE 5 HOLE DIM., ADDED EPOXY FILL NOTE. 8 7 REV DATE REV CHG BY CHANGE DATE Title TUCSON, ARIZONA .01 CHG BY CHANGE 3 Place 6 5 MINIATURE PRESS-IN B EMI FILTER --TOLERANCES-- Dwn R.C. 12-02-15 Ckd R.C. 12-02-15 Unless Otherwise TO Scale: NOT Material SCALE Specified SEE NOTES 2 Place REVISION RECORD A GLASS SEAL THIS SIDE .020 MAX. GLASS MENISCUS GROOVE TO KNURL MINOR DIA. .078" REF. UNSPECIFIED ANGLE ON GROOVE SIDES AND KNURL ENDS. 2. GOLD PLATED CASE AND LEAD. 3. EPOXY SEALED ON THE OPPOSITE END FROM THE GLASS SEAL. 4. PROPER INSTALLATION REQUIRES FIRM STEADY PRESSURE UNTIL FLANGE IS FULLY SEATED. B E .010 B 4 Sheet 1 of 1 A .005 3 A 4310-019 2 1