532T25DT

Model 532 Temperature Compensated Crystal Oscillator FEATURES • 5.0x3.2mm Surface Mount Footprint • Clipped Sinewave Output • Standard Frequencies; 13 MHz, 16.8 MHz, 19.2 MHz, 19.44 MHz, 19.68 MHz, 19.8 MHz, 26 MHz • Frequency Stability ±2.5 ppm • +2.7Vdc ~ +3.3Vdc Operation • Optional Voltage Control for Frequency Tuning • Operating Temperature –30°C to +85°C • Tape & Reel Packaging • RoHS/Green Compliant (6/6) DESCRIPTION The Model 532 is a Temperature Compensated Crystal Oscillator (TCXO) offering reduced size, low power consumption and enhanced frequency stability. The M532 is the perfect choice for today’s compact or portable wireless communications applications that require tight frequency control. ORDERING INFORMATION 532 SUPPLY VOLTAGE Y = +2.7Vdc T = +2.8Vdc R = +3.0Vdc L = +3.3Vdc FREQUENCY STABILITY * 25 = ± 2.5 ppm * Frequency vs. Temperature OPERATING TEMPERATURE RANGE D = -30°C to +85°C M FREQUENCY IN MHz M - indicates MHz and decimal point. Frequency is recorded with minimum 4 significant digits to the right of the "M". AFC RANGE S = ± 7 ppm to ± 16 ppm T = TCXO (no AFC) (VC = 1.5Vdc ± 1.0Vdc) Consult factory for other options that may be available. Example Part Number: 532L25DS19M4400 Document No. 008-0324-0 Page 1 - 4 Rev. B ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ 5.0x3.2mm Ceramic Package Clipped Sinewave TCXO Model 532 ELECTRICAL CHARACTERISTICS PARAMETER Standard Frequencies Storage Temperature Operating Temperature Frequency Stability vs. Temperature Absolute Maximums SYMBOL fO TSTG TA CONDITIONS -30°C to 85°C MIN TYP MAX 13, 16.8, 19.2, 19.44, 19.68, 19.8, 26 -40 85 -30 85 2.57 2.66 2.85 3.14 2.5 0.2 0.3 1.0 8.0 2.84 2.94 3.15 3.47 2.5 pF 2.5 5 -5 - UNIT MHz °C °C vs. Supply Voltage vs. Load vs. Aging vs. Aging Supply Voltage Order Code 'Y' Order Code 'T' Order Code 'R' Order Code 'L' Supply Current Pulling Range, AFC Output Load Control Voltage Output Voltage Levels VC Input Impedance Start Up Time Harmonics Phase Noise (Note 1) ∆f/fO 5% change 10% change 1st year 10 year ± ppm VCC ±5% ICC RL // CL VC VO ZVC TS VC = 1.5V ±1.0V Clipped Sinewave Typical @ fO = 13 MHz @100 Hz @1 kHz @10 kHz 2.7 2.8 3.0 3.3 7 - 16 10 kOhm // 10 1.5 1.2 3 -115 -135 -148 V mA ± ppm V Vp-p MOhm ms dBc dBc/Hz Waveform Parameters 0.5 0.8 1.0 - Notes: 1. Phase Noise performance may vary based on output frequency. TEST CIRCUIT, RL//CL LOAD PIN 1 2 3 4 10K Ω 10pF Including probe capacitance. D.U.T. PIN ASSIGNMENTS SYMBOL VC GND Output VCC DESCRIPTION Control Voltage * Circuit & Package Ground Clipped Sine Wave Output Supply Voltage + mA - 4 + POWER SUPPLY 3 D.U.T. + VM - 0.01uF - * If “No AFC” is selected, connect Pin 1 to ground. 1 2 Control Voltage Document No. 008-0324-0 Page 2 - 4 Rev. B ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠ 5.0x3.2mm Ceramic Package Clipped Sinewave TCXO Model 532 MECHANICAL SPECIFICATIONS PACKAGE DRAWING NOTES 1. DO NOT make connections to nonlabeled pins. Castellation pins may have internal connections used in the manufacturing process. 2. Termination pads (e4), barrier-plating is nickel (Ni) with gold (Au) flash plate. 3. Reflow conditions per JEDEC J-STD020. MARKING INFORMATION 1. C – CTS. 2. XXX – Frequency code, see Table I for codes. 3. ** - Manufacturing Site code. 4. D – Date code, see Table II for codes. 5. ● – Pin 1 identifier. 6. zzzzzzz – Reference code used in manufacturing process. (5.0 ±0.2) 0.197 ±0.008 PIN 1 IDENTIFIER (0.93) 0.037 CXXX**D ● zzzzzzz (3.2 ±0.2) 0.126 ±0.008 (1.6) 0.063 3 4 (0.70) 0.028 2 1 (2.95) 0.116 (1.6) MAX 0.063 Key: (mm) Inch TABLE I - FREQUENCY CODING Not all frequency values may be available for this model family. Consult factory for available frequencies. SUGGESTED SOLDER PAD GEOMETRY 0.079 [2.00] FREQUENCY 10.000 MHz 10.240 MHz 12.000 MHz 12.800 MHz 13.000 MHz 13.500 MHz 14.400 MHz 15.360 MHz 16.000 MHz 16.800 MHz 18.000 MHz 19.200 MHz 19.440 MHz MARKING CODE 100 102 120 128 130 135 144 153 160 168 180 192 194 FREQUENCY 19.680 19.800 19.998 20.000 20.480 24.000 25.000 26.000 32.000 32.512 32.768 38.880 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MARKING CODE 196 198 199 200 204 240 250 260 320 325 327 388 C BYPASS 4 0.047 [1.20] 3 0.087 [2.20] 1 0.146 [3.70] 2 Key: [mm] Inch TABLE II – DATE CODE MONTH YEAR 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 JAN A N a n FEB B P b p MAR C Q c q APR D R d r MAY E S e s JUN F T f t JUL G U g u AUG H V h v SEP J W j w OCT K X k x NOV L Y l y DEC M Z m z Document No. 008-0324-0 Page 3 - 4 Rev. B ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠ 5.0x3.2mm Ceramic Package Clipped Sinewave TCXO Model 532 TAPE AND REEL INFORMATION DIMENSIONS IN MILLIMETERS 17.5 Ø 13 4.0 8.0 Ø 1.50 1.75 1.90 1.70 2.0 120° 5.60 5.20 16.0 Ø 60 Ø 180 3.70 3.50 DIRECTION OF FEED Ø 23 Device quantity is 1,000 pieces minimum per 180mm reel. ENVIRONMENTAL SPECIFICATIONS Temperature Cycle: Mechanical Shock: Sinusoidal Vibration: Gross Leak: Fine Leak: Resistance to Solder Heat: Temperature and Humidity: High Temperature Operating Bias: Frequency Aging: Moisture Sensitivity Level: 200 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). 0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). No leak shall appear while immersed in an FC40 or equivalent liquid at +125°C for 20 seconds. Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent. Product must survive 3 reflows of +260°C peak, 10 seconds maximum. 85°C, 85% R.H., full bias, 500 hours. 2,000 hours at +125°C, maximum bias, disregarding frequency shift. 1,000 hours at +85°C, full bias, less than ±1 ppm shift. Level 1 per JEDEC J-STD-020. QUALITY AND RELIABILITY Quality systems meet or exceed the requirements of ISO 9000:2000 standards. Document No. 008-0324-0 Page 4 - 4 Rev. B ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠