632L3I014M74560

Model 632 HCMOS Clock Oscillator FEATURES           Standard 3.2mm x 2.5mm 4-Pad Surface Mount Package HCMOS Output Fundamental and 3rd Overtone Crystal Designs Frequency Range 1 – 125 MHz Frequency Stability ±50 ppm Standard, ±25 ppm and ±20 ppm Available Operating Voltages +1.8Vdc, +2.5Vdc, +2.8Vdc, +3.3Vdc or +5.0Vdc Operating Temperature to -40°C to +85°C Output Enable Standard Tape & Reel Packaging Standard, EIA-418 RoHS/Green Compliant [6/6] APPLICATIONS Model 632 is ideal for applications; such as broadband access, Ethernet/Gigabit Ethernet, microprocessors/DSP/FPGA, networking equipment computers and peripherals, digital video, cameras and other portable devices. ORDERING INFORMATION 632 M SUPPLY VOLTAGE FREQUENCY IN MHz M = +1.8Vdc N = +2.5Vdc T = +2.8Vdc L = +3.3Vdc S = +5.0Vdc M - indicates MHz and decimal point. 2 TEMPERATURE RANGE C = -20°C to +70°C I = -40°C to +85°C FREQUENCY STABILITY 6 = ±20ppm 5 = ±25ppm 3 = ±50ppm 1 1] Consult factory for 6I Stability/Temperature availability. 2] Frequency is recorded with three leading significant digits before the ‘M’ and 5 significant digits after the ‘M’ [including zeros]. [Ex. 3.579545 MHz, code as 003M57954; 14.31818 MHz, code as 014M31818; 125 MHz, code as 125M00000] Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [reference] Device quantity is 1k pcs. minimum and 3k pcs. maximum per 180mm reel. 8mm tape width. Document No. 008-0328-0 Page 1- 3 www.ctscorp.com Rev. D Model 632 3.2mm x 2.5mm Low Cost HCMOS Clock Oscillator ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT VC C TS TG fO - -0.5 -40 1.0 - 4.0 +100 125 V °C MHz ∆f/fO - - - 20, 25, 50 ± ppm ∆f/fO - - - 3 ± ppm/yr TA - -20 -40 +25 +70 +85 °C 1.62 2.25 2.52 2.97 4.50 1.8 2.5 2.8 3.3 5.0 1.98 2.75 3.08 3.63 5.50 - - 7 12 10 20 15 25 15 90%VC C - - 10%VC C 45 - -2, -4, -8, -16 +2, +4, +8, +16 55 - - 5 4 4 3 3 2 2 0.7*VC C - - 0.3*VC C 2 15 40 1 Maximum Supply Voltage Storage Temperature Frequency Range Frequency Stability [See Note 1and Ordering Information] ELECTRICAL PARAMETERS Aging Operating Temperature Commercial Industrial Supply Voltage Model 632M Model 632N Model 632T Model 632L Model 632S Supply Current Model 632M VC C ± 10 % IC C CL = 15pF 1.0 MHz to 100 MHz 100.1 MHz to 125 MHz 1.0 MHz to 100 MHz 100.1 MHz to 125 MHz 1.0 MHz to 100 MHz 100.1 MHz to 125 MHz [+1.8V] Model 632N, 632T [+2.5V, +2.8V] Model 632L, 632S [+3.3V, +5.0V] Output Load Output Voltage Levels Logic '1' Level Logic '0' Level Output Current Logic '1' Level [M,N,T,L,S] Logic '0' Level [M,N,T,L,S] Output Duty Cycle Rise and Fall Time Model 632M CL VO H VO L CMOS Load CMOS Load IO H IO L SYM VO H = 90%VC C [1.8V, 2.5/2.8V, 3.3V, 5.0V] VO L = 10%VC C [1.8V, 2.5/2.8V, 3.3V, 5.0V] @ 50% Level @ 10% - 90% Levels, CL = 15pF 1.0 MHz to 20 MHz 20.1 MHz to 125 MHz 1.0 MHz to 20 MHz 20.1 MHz to 125 MHz 1.0 MHz to 20 MHz 20.1 MHz to 125 MHz Application of VC C [+1.8V] Model 632N, 632T TR, TF [+2.5V, +2.8V] Model 632L, 632S [+3.3V, +5.0V] Start Up Time Enable Function Enable Input Voltage Disable Input Voltage TS VIH VIL TP LZ IS T pjpk-pk tjrms Pin 1 Logic Pin 1 Logic Pin 1 Logic Pin 1 Logic '1', Output Enabled '0', Output Disabled '1' '0', Output Disabled Bandwidth 12 kHz - 20 MHz Enable Time [M,N,T,L,S] Standby Current Period Jitter, pk-pk Phase Jitter, RMS Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and aging. LVCMOS OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD Page 2 - 3 mA pF V mA % ns ms V ms µA ps ENABLE TRUTH TABLE PIN 1 Logic ‘1’ Open Logic ‘0’ Document No. 008-0328-0 V PIN 3 Output Output High Imp. Rev. D Model 632 3.2mm x 2.5mm Low Cost HCMOS Clock Oscillator MECHANICAL SPECIFICATIONS MARKING INFORMATION 1. XX.XX – Frequency in MHz. 2. C – CTS and Pin 1 identifier. 3. ** - Manufacturing Site Code. 4. D – Manufacturing Date Code. [See Table 1 for codes.] 5. Complete CTS part number, frequency value and date code information must appear on reel and carton labels. PACKAGE DRAWING XX.XX C**D NOTES 1. Termination pads (e4). Barrier-plating is nickel [Ni] with gold [Au] flash plate. 2. Reflow conditions per JEDEC J-STD-020; 260°C maximum, 20 seconds. 3. MSL = 1. TABLE I MONTH YEAR JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC M 2001 2005 2009 2013 2017 A B C D E F G H J K L 2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z 2003 2007 2011 2015 2019 a b c d e f g h j k l m 2004 2008 2012 2016 2020 n p q r s t u v w x y z SUGGESTED SOLDER PAD GEOMETRY CBYPASS should be ≥ 0.01 uF. D.U.T. PIN ASSIGNMENTS PIN SYMBOL 1 Document No. 008-0328-0 Page 3 - 3 DESCRIPTION EOH Enable 2 GND Circuit & Package Ground 3 Output 4 VCC RF Output Supply Voltage Rev. D