744C083274JP

Chip Resistor Arrays Series 74x FEATURES • Low Cost • Thick Film Technology • High Density Packaging • • • • • • • • - Up to 30% less space per resistor than 0603 chip resistors - Up to 75% less space per resistor than 0805 chip resistors Low Profile; can be used in PCMCIA cards Leadless Surface Mount Construction Concave or Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuits Resistor Arrays Require Fewer Placements Than Discrete Components Tape and Reel Packaging RoHS Compliant in Accordance with EU Directive 2005/95/EC - Lead-Free Termination Finish - Exemption 5 for Pb in glass material and resistor elements ORDERING INFORMATION 742C083 101 J P PART CODE See Available Package Outlines Page 3 PACKAGE CODE 741X163 PACKAGE ONLY! C8 - Specifies 8mm carrier width for tape & reel packaging. Blank - Carrier width can be 12mm [typical] or 8mm. RESISTOR CODE RoHS COMPLIANT Matte Sn Finish See Table Page 2 TOLERANCE J = ± 5% (Standard) 3-digit code 3 Digit Resistor Code (For 5% and 2% tolerance only) 1st and 2nd Digit is the value. 3rd Digit is number of zeros. ex. 102 = 1000 ohm = 1k ohm ex. 683 = 68000 ohm = 68k ohm (Available for 740-746 Series) G = ± 2% 3-digit code (Available for 741-745 Series only except for 741X163, 745X101 and 745X102) 4 Digit Resistor Code (For 1% tolerance only) The first three digits are significant and fourth digit is multiplier. 1st, 2nd and 3rd Digit is the value. 4th Digit is number of zeros. ex. 1001 = 1000 ohm = 1k ohm ex. 6802 = 68000 ohm = 68k ohm F = ± 1% 4-digit code (Available for 741-745 Series only except for 745X101 and 745X102) X = zero ohm jumper For Resistance Value