770

Single In-Line Conformal Series 770 Technical Data Features • • • • • • High-Reliability Cermet Resistors Space Saving Over Individual Resistors Available in Odd or Even Number of Pins From 4 to 12 Leads 2.54mm/.100 in. Pin Spacing Packaged in Bulk RoHS Compliant Resistance Range: Resistance Tolerance: Standard: ±2% or 0.5Ω (whichever is greater) Standard: 10Ω to 1 MegΩ Operating Temperature Range: -55°C to +125°C Temperature Coefficient: Standard: 100Ω to 1 MegΩ 100PPM/°C typical 22Ω to 99Ω ±200PPM/°C typical Dielectric Strength: 100 VAC Maximum Operating Voltage: 100V not to exceed rated power Types of Circuits Bussed (Schematic 1) Isolated (Schematic 3) Dual Terminator (Schematic 5) Available in 4 through 12 Pins Available in 4, 6, 8, 10, 12 Pins Available in 6, 8, 10 Pins 1 of 3 March 2008 CTS Electronic Components www.ctscorp.com Package Dimensions Part Marking: For parts with reduced marking area (8 pins or less), the part series (770) may be omitted from the part number portion of the marking . Example: CTSK082281103P Number of Pins 4 5 6 7 8 9 10 11 12 Schematic 1&5 3 "A" Dimension +/-0.25/0.010 10.11/0.398 12.65/0.498 15.19/0.598 17.30/0.698 20.27/0.798 22.81/0.898 25.35/0.998 27.89/1.098 30.43/1.198 Packaged Power @25°C 0.60W 0.83W 0.96W 1.18W 1.32W 1.49W 1.66W 1.83W 2.00W Packaged Power @25°C 0.15W 0.30W Packaged Power @70°C 0.40W 0.52W 0.64W 0.76W 0.88W 1.00W 1.11W 1.24W 1.35W Packaged Power @70°C 0.10W 0.20W NOTES: *General Tolerances mm +/-0.25 inch +/-0.010 *Copper Alloy Leads, Solder-coated Standard Resistor Values & EIA Code Ohms 10 12 15 18 22 27 33 39 47 51 56 68 Code 100 120 150 180 220 270 330 390 470 510 560 680 Ohms 75 82 100 110 120 150 180 220 270 330 390 470 Code 750 820 101 111 121 151 181 221 271 331 391 471 Ohms 510 560 680 820 1K 1.2K 1.5K 1.8K 2.0K 2.2K 2.7K 3.3K Code 511 561 681 821 102 122 152 182 202 222 272 332 Ohms 3.9K 4.7K 5.1K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K Code 392 472 512 562 682 822 103 123 153 183 223 273 Ohms 33K 39K 47K 51K 56K 68K 82K 100K 120K 150K 180K 220K Code 333 393 473 513 563 683 823 104 124 154 184 224 Ohms 270K 330K 390K 470K 510K 560K 680K 820K 1M Code 274 334 394 474 514 564 684 824 105 Page 2 of 3 March 2008 CTS Electronic Components www.ctscorp.com How to Order 770 10 1 103 P Part Number Series Number of Pins RoHS Compliant (Sn/Ag solder) Resistor Code Refer to the EIA Code Noted on Page 2. Resistor Code Schematics 1 & 3 Resistor Value Schematic 5 Example 220/330 = 220Ω/330Ω Example 470/1.2K = 470Ω/1200Ω All part numbers are ±2% Schematic NOTE: No dashes or spaces to appear in part number. Example: 770101103P 1 3 5 Bussed Isolated Dual Terminator Packaging Bulk Pack All Products 250 Parts/Bag Environmental Performance Specifications Max. % Mil. Std. Test Cond. Test Description Delta R 202 Method 0.5% 107 B 5 cycles, -65°C to +125°C 0.5% 2 1/2 x rated voltage, 5 sec (100V Max.) 0.5% 106 240 hours, 0.1 rated load, -10°C to +65°C, 90% RH 1.0% 1000 hours, 0.1 rated load, 70°C, 85-92% RH 1.0% 240 hours, no load, @ 125°C 1.0% 108 D 1000 hours @ 70°C rated load 0.25% A 3 second dwell @ 350°C, dwell 0.25% 213 I 100g, 1 msec., 3 shocks each plane 0.25% 204 D 20g, 10-2000Hz, 4 hours/plane 0.25% 2.0 Kg. pull, 30 sec., three 45° bends 0.25% 24 hours @ -65°C, no load 0.25% 45 min @ -65°C, full load N/A 94V-0 Test Thermal Cycling Short Time Overload Moisture Resistance Load Humidity High Temp Exposure Load Life Resistance to Solder Heat Mechanical Shock Vibration Terminal Strength Low Temp Storage Low Temp Operation Flammability Non-Fungus per MIL-STD 810C Resistance to Solvents Solderability Isopropyl alcohol RMA Flux, 230°C, 5 seconds dip, 95% coverage Page 3 of 3 March 2008 CTS Electronic Components www.ctscorp.com