CB3LV-3C-5M000000

Model CB3 & CB3LV HCMOS/TTL Clock Oscillator Features        Ceramic Surface Mount Package Fundamental and 3rd Overtone Crystal Designs Frequency Range 1.0 – 200MHz * +3.3V and +5.0V Operation Operating Temperature Range to -40°C to +85°C Output Enable Standard Tape and Reel Packaging, EIA-418 Part Dimensions: 7.0 × 5.0 × 1.8mm • 171.497mg Standard Frequencies * See Page 6 for common frequencies. Check with factory for availability of frequencies not listed. Applications  Internet of Things [IoT, IIoT]  Microcontrollers and FPGAs  Wireless Communication  Networking Equipment  Data Communications  Computers and Peripherals  Ethernet/GbE/SyncE  Portable Devices  Test and Measurement Description CTS Model CB3 and CB3LV are low cost, low voltage clock oscillators supporting HCMOS output. Employing the latest IC technology, CB3/CB3LV have excellent stability and low phase jitter performance. Ordering Information Supply Voltage LV Model CB3 Code LV Blank - Frequency Stability 3 Voltage +3.3Vdc +5.0Vdc Temperature Range C Code C I Stability Code 6 ±20ppm 1 ±25ppm 5 7 ±32ppm 2 ±50ppm 3 2 ±100ppm 2 Frequency Code [MHz] - XXXMXXXXXX Code Frequency Temp. Range -20°C to +70°C -40°C to +85°C Product Frequency Code 3 Notes: 1] Consult factory for availability of 6I Stability/Temperature combination. 2] These stabilities are not recommended for new designs. 3] Frequency is recorded with 1, 2 or 3 leading significant digits before and 6 significant digits [including zeroes] after the "M". [Ex. 3.579545MHz = 3M57954, 14.31818MHz = 14M318180, 25MHz = 25M000000, 125MHz = 125M000000] [Ex. part numbers - CB3LV-3C-25M000000, CB3-3C-14M318180] 4] CTS Distributors may add a -T or -1 at the end of the part number to indicate Tape and Reel packaging. Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications.  Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC# 008-0256-0 Rev. H Page 1 of 6 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model CB3 & CB3LV HCMOS/TTL Clock Oscillator Electrical Specifications Operating Conditions P ARAMETER Maximum Supply Voltage Supply Voltage SYMBO L CO NDITIO NS VCC - VCC Supply Current ICC CB3 LV O perating Temperature Storage Temperature TYP MAX UNIT V -0.5 - 7.0 2.97 3.3 3.63 4.50 5.0 5.50 25 V Frequency Range @ Tested load for typical values CB3 O utput Load ±10% MIN CL 1.0MHz to 20MHz @ CL = 30pF - 10 20.001MHz to 80MHz @ CL = 30pF - 30 50 80.001MHz to 107MHz @ CL = 15pF - 40 70 1.0MHz to 20MHz @ CL = 15pF - 7 12 20.001MHz to 80MHz @ CL = 15pF - 20 35 80.001MHz to 200MHz @ CL = 15pF - 30 60 1.0MHz to 50MHz - - 30 50.001MHz to 80MHz - - 30 80.001MHz to 200MHz - - 15 -20 TA - TSTG - -55 SYMBO L CO NDITIO NS MIN fO CB3 1.0 - 107 CB3LV 1.0 - 200 Δf/fO - 20, 25 or 50 Δf/f25 First Year @ +25°C, nominal VCC -40 +25 +70 +85 mA pF °C - +125 °C TYP MAX UNIT Frequency Stability P ARAMETER Frequenc y Range Frequenc y Stability [Note 1] Aging -5 MHz ±ppm ±3 5 ppm TYP MAX UNIT 1.] Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 1st year aging. Output Parameters P ARAMETER SYMBO L CO NDITIO NS O utput Type - - VOH O utput Voltage Levels VOL O utput Current Levels O utput Duty Cyc le HCMOS - Logic '1' Level, CMOS Load 0.9VCC - - Logic '1' Level, TTL Load VCC - 0.6V - - Logic '0' Level, CMOS Load - - 0.1VCC Logic '0' Level, TTL Load - - 0.4 IOH VOH = +2.2V/+3.9V VCC = +3.0V/+4.5V - - -8, -16 IOL VOL = 0.4V VCC = +3.0V, +4.5V - - +8, +16 @ 50% Level 45 - 55 1.0MHz to 20MHz @ CL = 30pF - 8 10 20.001MHz to 80MHz @ CL = 30pF - 5 8 2.5 5 SYM Rise and Fall Time V mA % @ 10%/90% Levels, Frequency Range @ Tested load for typical values [Note 2] CB3 TR, TF CB3LV Start Up Time MIN TS 80.001MHz to 107MHz @ CL = 15pF 1.0MHz to 20MHz @ CL = 15pF 6 8 20.001MHz to 80MHz @ CL = 15pF 3 5 80.001MHz to 200MHz @ CL = 15pF - 1.5 3 Application of VCC - 5 10 ns ms 2.] Parameters are worst case and account for comprehensive range of product specification. Performance may vary by application and must be validated by end user. DOC# 008-0256-0 Rev. H Page 2 of 6 ©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model CB3 & CB3LV HCMOS/TTL Clock Oscillator Electrical Specifications Output Parameters P ARAMETER SYMBO L Enable Func tion CO NDITIO NS MIN TYP MAX UNIT V Tri-State Enable Input Voltage VIH Pin 1 Logic '1', Output Enabled 2.0 - - Disable Input Voltage VIL Pin 1 Logic '0', Output Disabled - - 0.8 V Enable Current ISTB Pin 1 Logic '0', Output Disabled - - 10 µA Enable Time P hase Jitter, RMS TPLZ Pin 1 Logic '1' - - 10 ms tjrms Bandwidth 12 kHz - 20 MHz - 0.5