Model CP5 and CP7
FEATURES
• • • • • • • • • • Standard 5x3.2 and 7x5mm SMT Footprint LVCMOS Output PLL Technology Frequency Range 2 – 200 MHz Frequency Stability, ±50 ppm +2.5Vdc or +3.3Vdc Operation Operating Temperature to –40°C to +85°C Output Enable (Stand-By) Tape & Reel Packaging RoHS/Green Compliant
DESCRIPTION
The CP5 and CP7 is a ceramic packaged Programmable Clock oscillator for quick turn delivery. Wide range of frequencies allows engineers to develop new designs and bring them to market faster and more efficiently.
ORDERING INFORMATION
CP
MODEL NUMBER Clock, Programmable PACKAGE TYPE 5 = 5x3.2mm, LCC 7 = 7x5mm, LCC FREQUENCY IN MHz M - indicates MHz and decimal point. Frequency is recorded with 4 significant digits to the right of the "M".
M
PACKAGING OPTIONS T0 = Tape and Reel (1k pcs.) T3 = Tape and Reel (250 pcs.) SP = Slide Pak (plastic tube) BK = Bulk STABILITY / TEMPERATURE RANGE A = ±50 ppm, -20°C to +70°C B = ±50 ppm, -40°C to +85°C SUPPLY VOLTAGE L = +3.3V N = +2.5V
Example Part Number: CP7032M7680LABK
Document No. 008-0321-0
Page 1 - 4
Rev. B
٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠
5x3.2mm and 7x5mm Low Cost Programmable Clock Oscillator
Model CP5 and CP7
ELECTRICAL CHARACTERISTICS
PARAMETER Maximum Supply Voltage Storage Temperature Frequency Range Frequency Stability
(See Note 1 and Ordering Information)
Absolute Maximums
SYMBOL VCC TSTG fO ∆f/fO TA VCC ICC CL VOH VOL SYM TR, TF TS VIH VIL IST TPLZ JP-P tjms @ 85°C ± 10 %
CONDITIONS -
MIN -0.5 -55 2 -20 -40 10 2.25 2.97 0.1VCC 45 0.7VCC -
TYP -
MAX 4.6 125 200 50 70 85 2.75 3.63 40 15 0.9VCC 55 4 10 0.2VCC 10 10 250 -
UNIT V °C MHz ± ppm °C Years V mA pF V % ns ms V uA ms ps ps RMS
Operating Temperature Commercial Industrial Data Retention Supply Voltage
(see Note 2)
-
25 2.5 3.3 2.5 100 2.5
Electrical and Waveform Parameters
Supply Current Output Load Output Voltage Levels Logic '1' Level Logic '0' Level Output Duty Cycle Rise and Fall Time Start Up Time Enable Function Enable Input Voltage Disable Input Voltage Standby Current Enable Start Up Time Jitter (peak - peak) Phase Jitter
@ CL = 15 pF CMOS Load CMOS Load IOH = -4mA IOL = +4mA
@ 50% Level @ 20% - 80% Levels Application of VCC Pin 1 Logic '1', Output Enabled Pin 1 Logic '0', Output Disabled Pin 1 Logic '0', Output Disabled Pin 1 Logic '1', Output Enabled 10k hits & 0.1uF bypass capacitor Bandwidth 12 kHz - 20 MHz
Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and first year aging at an average operating temperature of +40 °C. 2. Power supply start-up time should be greater than 150 us (0%VCC to 90%VCC).
CMOS/TTL OUTPUT WAVEFORM
Tr Tf
TEST CIRCUIT, CMOS LOAD
+ mA -
VOH 90%, 80%, 2.4V
+ + VM 1 2 .01uF D.U.T. CL Including probe capacitance.
POWER SUPPLY
4
3
50%, 1.5V
-
10%, 20%, 0.5V
UPTIME (t) PERIOD (T)
VOL
Enable Input
DUTY CYCLE = t/T x 100 (%)
ENABLE TRUTH TABLE PIN 1 Logic ‘1’ Open Logic ‘0’ PIN 3 Output Output High Imp.
D.U.T. PIN ASSIGNMENTS PIN 1 2 3 4 SYMBOL EOH GND Output VCC DESCRIPTION Enable Input (Standby) Circuit & Package Ground RF Output Supply Voltage
Document No. 008-0321-0
Page 2 - 4
Rev. B
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
171 Covington Drive
٠
Bloomingdale, IL 60108
٠٠٠
5x3.2mm and 7x5mm Low Cost Programmable Clock Oscillator
Model CP5 and CP7
MECHANICAL SPECIFICATIONS
PACKAGE DRAWING SUGGESTED SOLDER PAD GEOMETRY
PIN 1 IDENTIFIER
L
P1 P2
S2
MARKING LABEL HERE
3
4
C BYPASS 4
S1 3 S3
W
P4
2 1
P3 T
1 S4
2
DIMENSION TABLE
PACKAGE CP5 CP7 5.0 0.197 7.0 0.276
L ±0.2 ±0.008 ±0.2 ±0.008
3.2 0.126 5.0 0.197
W ±0.2 ±0.008 ±0.2 ±0.008
T 1.2 Max 0.047 Max 1.6 Max 0.063 Max
P1 1.2 0.047 1.4 0.055
P2 1.0 0.039 1.2 0.047
P3 2.54 0.100 5.08 0.200
P4 2.2 0.087 3.7 0.146
S1 1.2 0.047 2.0 0.079
S2 1.4 0.055 1.8 0.071
S3 2.2 0.087 4.2 0.165 Key:
S4 2.54 0.100 5.08 0.200 mm Inch
CP5 MARKING INFORMATION, Label 1. P5 – programmable, 5x3.2mm package. 2. V - voltage code (see Ordering Information). 2. S - stability/temperature code (see Ordering Information). 3. D – Manufactured Date Code (see Table I). 4. XX.XXX - Frequency marked with 3 significant digits after the decimal or XXX.XX - Frequency marked with 2 significant digits after the decimal. P5VSD XX.XXX P5VSD XXX.XX
CP7 MARKING INFORMATION, Label 1. YYWW – Programmed Date code, YY – year, WW – week. 2. XXX.XXXX - Frequency marked with 4 significant digits after the decimal. 3. P7VSP P7 – programmable, 7x5mm package. CTS YYWW V - voltage code. XXX.XXXX S - stability/temperature code. ● P7VS
TABLE I – DATE CODE
MONTH YEAR 2001 2005 2009 2013 2017 A B C D E F G H J K L M
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
2002
2006
2010
2014
2018
N
P
Q
R
S
T
U
V
W
X
Y
Z
2003
2007
2011
2015
2019
a
b
c
d
e
f
g
h
j
k
l
m
2004
2008
2012
2016
2020
n
p
q
r
s
t
u
v
w
x
y
z
Document No. 008-0321-0
Page 3 - 4
Rev. B
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
171 Covington Drive
٠
Bloomingdale, IL 60108
٠٠٠
5x3.2mm and 7x5mm Low Cost Programmable Clock Oscillator
Model CP5 and CP7
PACKAGING INFORMATION
Contact CTS Distributors for quantity requirements and mechanical details for each packaging option.
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle: Mechanical Shock: Sinusoidal Vibration: Gross Leak: Fine Leak: Resistance to Solder Heat: High Temperature Operating Bias: Frequency Aging: Moisture Sensitivity Level: 400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1 minute transfer time between temperatures. 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3 mutually perpendicular planes (18 total shocks). 0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles each in 3 mutually perpendicular planes (9 times total). No leak shall appear while immersed in an FC40 or equivalent liquid at +125°C for 20 seconds. Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent. Product must survive 3 reflows of +260°C peak, 10 seconds maximum. 2,000 hours at +125°C, maximum bias, disregarding frequency shift. 1,000 hours at +85°C, full bias, less than ±5 ppm shift. Level 1 per JEDEC J-STD-020.
QUALITY AND RELIABILITY
Quality systems meet or exceed the requirements of ISO 9000:2000 standards.
Document No. 008-0321-0
Page 4 - 4
Rev. B
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
171 Covington Drive
٠
Bloomingdale, IL 60108
٠٠٠
