VCP3026A

Model VCP3026A Frequency Translator Features: • • • • • • 155.52 MHz SAW-based LVPECL output RoHS Compliant Low Profile Surface Mount Package Excellent solder reflow performance PCB Substrate for excellent TCE match Non-peaking Attenuation Response VCP3026A 155 M CTS 07XX Description and applications: Surface mount 15.9 mm SQ frequency translator operating at a 3.3V supply with complementary LVPECL outputs for use in telecom & datacom • See WWW.CTSCORP.COM for product patent status. Electrical Specifications: VCP3026A Input frequency Output frequency Supply Voltage (± 5%) PECL input PECL output Output Duty Cycle Current Drain Operating Temperature Input frequency tracking capability Peaking Jitter attenuation RMS phase jitter generation (12 kHz to 50 MHz) Specification 38.88 MHz 155.52 MHz 3.3V 400 mV min. peak-to-peak Logic “0” Logic “1” 45/55% max 95 mA max. -40 to 85° C +/- 32 ppm minimum < 0.1 dB > > -0.5 dB @ 100 Hz offset - 27 dB @ 1 kHz offset Min. 1.49V 2.28V Max. 1.68V 2.42V < 1 psec max. < .5 psec typical VCP3026A REV. A 03/26/07 CTS Electronic Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 http://www.ctscorp.com/ Mechanical Dimensions (mm): 15.9mm x 15.9mm x 3.1mm (max.): VCP3026A 15.9±0.1 [.625±.004] Pin #1 mark PIN 14 PIN 13 3.1 MAX [.122] 0.76 [.030] 6.98 [.275] 2.62 TYP [.103] 1.14 TYP [.045] PIN 1 PIN 2 15.9±0.1 PIN 3 [.625±.004] PIN 4 PIN 5 PIN 12 VCP3026A 155 M CTS 07XX PIN 11 PIN 10 PIN 9 PIN 8 C L 2.54 TYP [.100] 1.02 TYP [.040] PIN 6 PIN 7 0.25 [.010] Ø0.51[.020] 10 places C L HATCHING INDICATES BARRIER COATING OVER RESIST MASK OVER GROUND PLANE 1.7 [.067] TYP Recommended Land Pattern 17.60 [.693] 12.75 [.502] THIRD ANGLE PROJECTION 1.19 TYP [.047] All dimensions are in MM [Inches]. All dimensions are nominal unless otherwise specified. Lead Termination Finish: Gold Flash, Vdd-.04) Logic “0” indicates that no input signal is present or the input signal has moved out of the lock range (CMOS Level