EPS033100

date page 06/23/2011 1 of 5 SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY FEATURES •Up to 6 W power •Compact size •Single output from 3 ~ 24 V •Overload, over voltage, and short circuit protections •100 ~ 132 Vac input voltage •meets EISA / efficiency level IV regulations •custom designs available RoHS C UL US ® MODEL EPS030100 EPS033100 EPS045100 EPS050100 EPS060100 EPS090066 EPS120050 EPS150040 EPS180033 EPS240025 Notes: output voltage nominal (Vdc) output current max (A) output power max (W) ripple and noise1 max (mVp-p) efficiency level 3 3.3 4.5 5 6 9 12 15 18 24 1 1 1 1 1 0.66 0.5 0.4 0.33 0.25 3 3.3 4.5 5 6 6 6 6 6 6 100 100 100 100 100 100 150 150 180 240 IV IV V V V V V V V IV 1. At full load, 100 ~ 132 Vac input, 20 MHz bandwidth oscilloscope, each output terminated with 10 μF aluminum electrolytic and 0.1 μF ceramic capacitors. PART NUMBER KEY EPS030100 - PXXXX - CXX Base Number Reserved for Custom Configurations example of 3 Vdc, 1 A DC Plug Type: see output plug options on page 4 cui.com CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 2 of 5 INPUT parameter voltage frequency input current inrush current no load power consumption 120 Vac, inrush lasts no longer than 0.5 ms before settling to steady state current conditions/description min 100 47 typ max 132 63 1 40 0.5 units Vac Hz A A W OUTPUT parameter line regulation load regulation temperature coefficient start-up time hold-up time 0 ~ 40°C, full load, after initial 1 hour warm-up time needed to reach regulation at 115 Vac, full load 10 conditions/description min typ ±1 ±5 ±0.02 3 max units % % %/°C s ms PROTECTIONS parameter over voltage protection overload protection short circuit protection conditions/description clamped by internal protection zener Fold-back current limiting starts at 105 ~ 160% of the rated output current. Auto-recovery. Long term exposure to overload condition may reduce product reliability. Continuous, auto-recovery upon removal of short min typ max units SAFETY & COMPLIANCE parameter isolation voltage isolation resistance safety approvals EMI standard leakage current class 2 power supply MTBF RoHS compliant conditions/description input to output at 10 mA for 1 minute input to output at 500 Vdc UL/cUL 1310 FCC part 15 class B at 120 Vac yes at 25°C, per MIL-HDBK-217E yes 240,000 hours 0.5 mA 100 min typ max 3,000 units Vac MΩ ENVIRONMENTAL parameter operating temperature storage temperature operating humidity storage humidity conditions/description min 0 -10 20 10 typ max 40 70 80 90 units °C °C % % cui.com CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 3 of 5 MECHANICAL DRAWING input plug case size US blade 62.3 L x 26.8 W x 42 H mm tolerance: ±1 mm 17.0 42 1.0 26.8 1.0 12.7 62.3 1.0 22.3X18.0 1830 100 Units: mm 6.3 Tolerance: X.X ±0.5mm X.XX ±0.03mm NOTE 1: THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A VERTICAL OR FLOOR MOUNT POSITION. 3.0 (TYP) cui.com CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 4 of 5 OUTPUT PLUG OPTIONS 3.5 mm Phono Plug *Tip positive P1 P1R Standard DC Plug P51/P5R P6/P6R P7/P7R P8/P8R P9/P9R Notes: Standard PX Right Angle PXR A 5.5 5.5 3.5 3.8 3.8 B 2.1 2.5 1.3 1.35 1.05 C 12 12 9.5 9.5 9.5 Unit mm mm mm mm mm Locking DC Plug 1. dc plug length for EPS050100-P5P is 9.5 mm P10 P11 A 5.5 5.5 B 2.1 2.5 C 9.5 9.5 Unit mm mm EIAJ Plugs EIAJ A B P12/P12R EIAJ-1 2.35 0.7 P13/P13R EIAJ-2 4.0 1.7 P14/P14R EIAJ-3 4.75 1.7 C 9.5 9.5 9.5 D NA 5.0 5.0 Unit mm mm mm Standard PXX Right Angle PXXR Stripped and Tinned DC PLUG TYPE ST stripped and tinned Plug type PXX X X Plug angle: “blank” = standard R = right angle Plug polarity: “blank” = N/A P = center positive N = center negative cui.com CUI Inc │ SERIES: 6 W wall plug │ DESCRIPTION: SWITCHING POWER SUPPLY date 06/23/2011 │ page 5 of 5 REVISION HISTORY rev. 1.0 1.01 1.02 description initial release applied new spec template removed multiple models, applied new spec template date 06/29/2006 12/28/2010 05/26/2011 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.