VAD6-D48-S12

rev. rev. page date 1 of 3 08/2007 PART NUMBER: VAD6 series DESCRIPTION: DC/DC converter features ·6W isolated output ·efficiency to 82% ·regulated outputs ·Pi input filter ·low ripple and noise ·24-Pin DIP package ·continuous short circuit protection model number 1, 2, 3 VAD6-D12-S3R3 VAD6-D12-S5 VAD6-D12-S12 VAD6-D12-S15 VAD6-D12-D5 VAD6-D12-D12 VAD6-D12-D15 VAD6-D24-S3R3 VAD6-D24-S5 VAD6-D24-S12 VAD6-D24-S15 VAD6-D24-D5 VAD6-D24-D12 VAD6-D24-D15 VAD6-D48-S3R3 VAD3-D48-S5 VAD6-D48-S12 VAD6-D48-S15 VAD6-D48-D5 VAD6-D48-D12 VAD6-D48-D15 input voltage 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC output voltage 3.3VDC 5VDC 12VDC 15VDC ±5VDC ±12VDC ±15VDC 3.3VDC 5VDC 12VDC 15VDC ±5VDC ±12VDC ±15VDC 3.3VDC 5VDC 12VDC 15VDC ±5VDC ±12VDC ±15VDC output current 1000mA 1000mA 470mA 400mA ±500mA ±230mA ±190mA 1000mA 1000mA 470mA 400mA ±500mA ±230mA ±190mA 1000mA 1000mA 470mA 400mA ±500mA ±230mA ±190mA input current no load full load 7.5mA 393mA 7.5mA 545mA 7.5mA 585mA 7.5mA 625mA 12mA 545mA 12mA 575mA 12mA 590mA 5mA 197mA 5mA 265mA 5mA 285mA 5mA 305mA 7.5mA 265mA 7.5mA 285mA 7.5mA 295mA 2mA 98mA 2mA 133mA 2mA 145mA 2mA 154mA 3mA 133mA 3mA 142mA 3mA 147mA efficiency 70% 76% 80% 80% 76% 80% 80% 70% 78% 82% 82% 78% 81% 81% 70% 78% 81% 81% 78% 81% 81% NOTES: 1. suffix “HM” for 1.5K Vdc isolation 2. suffix “H” for 3K Vdc isolation 3. suffix “-SMT” for SMT case style 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 phone fax rev. page date 2 of 3 08/2007 PART NUMBER: VAD6 series DESCRIPTION: DC/DC converter INPUT input voltage range 12V 24V 48V input filter 9-18V 18-36 36-72 Pi Type OUTPUT voltage accuracy voltage balance(dual) t emperature coefficient ripple and noise, 20MHz BW short circuit protection line regulation single/dual 1 load regulation single 2 dual 3 ±2.0% max. ±1.0% max. ±0.05% / °C max. 100mV p-p max. 1% p-p max. continuous ±0.5% ±0.5% ±1.0% 3.3V / 5V 12V / 15V GENERAL SPECIFICATIONS efficiency isolation resistance switching frequency isolation resistance operating temperature range storage temperature case temp.(plastic case) (copper case) cooling dimensions see table 10 9 O hms 100kHz min. 10 9 Ohms -25°C to +71°C -40°C to +100°C 95°C max. 100°C max. free air convection 1.25x0.8x0.4 inches (31.8x20.3x10.2mm) ISOLATION VOLTAGE 500 VDC min 1.5K VDC min 3K VDC min4 standard models suffix “HM” models suffix “H” models CASE MATERIAL standard models suffix “HM” models non-conductive black plastic black coated copper with non-conductive base NOTES: 1. 2. 3. 4. measured from high line to low line measured from full load to 10% load measured from full load to 1/4 load non-conductive black plastic only 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 phone fax rev. page date 3 of 3 08/2007 PART NUMBER: VAD6 series DESCRIPTION: DC/DC converter DIMENSIONS (mm) DERATING CURVE 120% -25 71 100% 80% Output Load(%) 60% 40% Plastic Case Copper Case 20% 95 0% -25 0 25 50 75 100 100 Ambient Temperature(˚C) 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 phone fax