VGD-60-D512

Additional Resources: Product Page date 07/10/2018 page 1 of 4 ED SERIES: VGD-60 Ϳ DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 60 W continuous power universal input (85~264 Vac / 120~370 Vdc) dual output overload, over voltage, and short circuit protections UL/cUL and Intertek 60950-1 safety approvals EXLOWLQ(0,¿OWHU efficiency up to 80% output voltage (Vdc) VGD-60-D512 5 12 VGD-60-D524 5 24 output power1 ripple and noise2 HϒFLHQF\ min (A) max (A) max (W) max (mVp-p) W\S (%) 0.3 0.3 6 4 60 80 120 79 0.3 0.3 6 2.2 60 80 240 80 N 1. Maximum total combined power. 2. Ripple & noise are measured at 20 MHz BW with 47 µF aluminum electrolytic capacitor and 0.1 µF ceramic capacitor on the output. IS C O Notes: output current TI MODEL N U • • • • • • • D PART NUMBER KEY VGD-60 - DXXX Base Number Output Voltage cui.com Additional Resources: Product Page CUI Inc Ϳ SERIES: VGD-60 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 07/10/2018 Ϳ page 2 of 4 INPUT parameter conditions/description min voltage input current 115 Vac 230 Vac inrush current 115 Vac, full load, cold start 230 Vac, full load, cold start OUTPUT conditions/description 47 63 Hz 1.5 0.7 A A 30 60 A A max units W\S ±1 load regulation hold-up time 115 Vac, full load 230 Vac, full load adjustability adjustable with built-in trim pot1 TI 1. Adjustment of 5 V output only. N WHPSHUDWXUHFRHϒFLHQW PROTECTIONS conditions/description over voltage protection VKXWGRZQDQGODWFKRϑUHFRYHUDIWHUUHVWDUW overload protection hiccup mode, automatically recovers short circuit protection continuous, automatically recovers C O SAFETY & COMPLIANCE min N parameter parameter Vac Vdc min line regulation Note: units 264 370 U parameter W\S ED frequency max 85 120 conditions/description ±5 % ±0.03 %/°C 10 50 ms ms ±5 % W\S 110 min W\S isolation voltage input to output input to case output to case isolation resistance input to output at 500 Vdc @ 25°C safety approvals UL 60950-1, Intertek EN 60950-1 EMI/EMC EN 55022 (CISPR22) Class B, EN 61000 -3-2,-3,-4-2,3,4,5,6,8,11; EN 55024 at 240 Vac MTBF MIL-HDBK-217F(25°C) RoHS 2011/65/EU max units 7 V 160 % max units 3,000 1,500 500 Vac Vac Vac 100 0Ÿ 3.5 IS leakage current % 300,000 mA hrs D ENVIRONMENTAL parameter conditions/description min operating temperature see derating curve storage temperature operating humidity non-condensing storage humidity cui.com W\S max units -10 60 °C -20 85 °C 20 90 % 10 95 % Additional Resources: Product Page CUI Inc Ϳ SERIES: VGD-60 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 07/10/2018 Ϳ page 3 of 4 MECHANICAL parameter conditions/description dimensions 129 x 98 x 38 (5.1 x 3.9 x 1.5 inch) min cooling method free air convection (see derating curve below) W\S max mm 433 -10 1 MECHANICAL DRAWING 5 6 N 8.20 0.323 O 9.50 0.374 C 120.00 4.724 18.50 0.728 3.50 0.138 9.50 0.374 18.00 0.709 38.00 1.496 28.50 1.122 IS 3.50 0.138 75.50 2.972 M3 (3 PLCS) 129.00 5.079 73.50 2.894 D 3.50 0.138 (2 PLCS) M3 (2 PLCS) 85.50 3.366 33.00 1.299 98.00 3.858 31.00 1.220 4.50 0.177 4 TI units mm[inches] tolerance: “PPXQOHVVRWKHUZLVHVSHFL¿HG 32.50 1.280 3 N 2 U DERATING CURVES 9.00 0.354 g ED weight 6.50 0.256 units 122.50 4.823 7.00 0.276 3.50 0.138 cui.com PIN CONNECTIONS Pin Function 1 ac line 2 ac neutral 3 FG 4 COM 5 +V2 6 COM 7 +V1 Additional Resources: Product Page CUI Inc Ϳ SERIES: VGD-60 Ϳ DESCRIPTION: AC-DC POWER SUPPLY date 07/10/2018 Ϳ page 4 of 4 REVISION HISTORY description date 10/26/2011 1.0 initial release 1.01 updated capacitor values for ripple measurements 1.02 9,Q¿QLW\EUDQGLQJUHPRYHG 1.03 added minimum current requirements 1.04 updated drawing 1.05 updated datasheet ED rev. 04/20/2012 08/21/2012 10/29/2013 01/15/2014 07/10/2018 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com &8,RϑHUVDWZR\HDUOLPLWHGZDUUDQW\&RPSOHWHZDUUDQW\LQIRUPDWLRQLVOLVWHGRQRXUZHEVLWH CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a OLIHVXSSRUWGHYLFHRUV\VWHPZKRVHIDLOXUHWRSHUIRUPFDQEHUHDVRQDEO\H[SHFWHGWRFDXVHWKHIDLOXUHRIWKHOLIHVXSSRUWGHYLFHRUV\VWHPRUWRDϑHFWLWVVDIHW\RUHϑHFWLYHQHVV