VIESD1-S12-D15-SIP

1/3 VIESD1-SIP Series DC-DC Converter Rev. 06-2007 Description Designed to convert fixed voltages into an isolated regulated voltage, the VIESD1-SIP series is well suited for providing boardmount local supplies in a wide range of applications, including mixed analog/digital circuits, test & measurement equip., process/machine controls, datacom/telecom fields, etc... Features ·Isolated 1 W output ·Regulated ·High efficiency to 73% ·Dual voltage output ·Small footprint ·SIP package style ·Industry standard pinout ·UL94-V0 package ·No heatsink required ·3K Vdc isolation ·Temperature range: -40°C~+85°C ·No external component required ·Low cost Model Number VIESD1-S5-D5-SIP VIESD1-S5-D9-SIP VIESD1-S5-D12-SIP VIESD1-S5-D15-SIP VIESD1-S12-D5-SIP VIESD1-S12-D9-SIP VIESD1-S12-D12-SIP VIESD1-S12-D15-SIP VIESD1-S24-D5-SIP VIESD1-S24-D9-SIP VIESD1-S24-D12-SIP VIESD1-S24-D15-SIP Input Voltage Nominal 5 Vdc 5 Vdc 5 Vdc 5 Vdc 12 Vdc 12 Vdc 12 Vdc 12 Vdc 24 Vdc 24 Vdc 24 Vdc 24 Vdc Range 4.75~5.25 Vdc 4.75~5.25 Vdc 4.75~5.25 Vdc 4.75~5.25 Vdc 11.4~12.6 Vdc 11.4~12.6 Vdc 11.4~12.6 Vdc 11.4~12.6 Vdc 22.8~25.2 Vdc 22.8~25.2 Vdc 22.8~25.2 Vdc 22.8~25.2 Vdc Output Voltage ±5 Vdc ±9 Vdc ±12 Vdc ±15 Vdc ±5 Vdc ±9 Vdc ±12 Vdc ±15 Vdc ±5 Vdc ±9 Vdc ±12 Vdc ±15 Vdc Output Current Max. ±100 mA ±56 mA ±42 mA ±33 mA ±100 mA ±56 mA ±42 mA ±33 mA ±100 mA ±56 mA ±42 mA ±33 mA Min. ±10 mA ±6 mA ±5 mA ±4 mA ±10 mA ±6 mA ±5 mA ±4 mA ±10 mA ±6 mA ±5 mA ±4 mA Efficiency 69% 70% 72% 72% 70% 72% 73% 73% 72% 72% 73% 73% Package Style SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP SIP Note: 1. All specifications measured at TA=25°C, humidity 3,500,000 hrs. Isolation S pecifications Item Isolation Voltage Insulation Resistance Test Conditions Tested for 1 min. Test at 500 Vdc Min. 3000 1000 Typ. Max. Units Vdc MΩ Typical Characteristics Temperature Derating Graph Operating Temp.( C ) Outline Dimensions & Recommended Layout Pattern Pin Function Pin 1 2 7 9 10 Vin GND + Vo -Vo 0V Side View Bottom View 12 7 9 10 Note: All Pins on a 2.54mm pitch; all pin diameters are 0.50mm; all dimensions in mm. V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258 3/3 VIESD1-SIP Series DC-DC Converter Rev. 06-2007 Application Notes: - Filtering In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the DC/DC output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be appropriate. If the capacitance is too big, a startup problem might arise. For every channel of output, providing that safe and reliable operation is ensured, the greatest capacitance of its filter capacitor is shown in the External Capacitor Table. To get an extreme low ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, which may produce a more significant filtering effect. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference (see figure 1). - Requirement on Output Load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of DC/DC converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company’s products with a lower rated output power. - Overload protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. L L +Vin C +Vout External Capacitor Table Vin 5VDC 12VDC 24VDC --External capacitor 4.7uF 2.2uF 1uF Vout 5VDC 9VDC 12VDC 15VDC External capacitor 4.7uF 2.2uF 1uF 0.47uF DC DC C -Vin -Vout V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258