VMS-60-5

Additional Resources: Product Page | 3D Model date 05/10/2021 page 1 of 4 SERIES: VMS-60 │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • up to 60 W continuous power industry standard 2” x 4” footprint universal input (90 ~ 264 Vac) single output from 5 to 48 V no load power < 0.5W over voltage and short circuit protections full medical safety approvals efficiency up to 90% RoHS MODEL output voltage output current output power ripple and noise1 efficiency2 (Vdc) max (A) max (W) max (mVp-p) typ (%) 5 8 40 50 82 VMS-60-12 12 5 60 120 87 VMS-60-15 15 4 60 150 88 VMS-60-24 24 2.5 60 240 89 VMS-60-48 48 1.25 60 480 90 VMS-60-5 Notes: 1. Measured at 20MHz, with 0.1uF ceramic and 10uF electrolytic capacitors. 2. Measured at full load, 230 Vac, and 25°C PART NUMBER KEY VMS-60 - XX Base Number Output Voltage cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-60 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2021 page 2 of 4 INPUT parameter conditions/description min voltage typ 90 frequency 47 max units 264 Vac 63 Hz input current at 100 Vac at 240 Vac 1.6 0.8 A A inrush current at 240 Vac 75 A max units OUTPUT parameter conditions/description line regulation low line to high line, full load min typ load regulation 10% to 100% full load ±1 % hold-up time 115 Vac 16 ms ±0.5 adjustability % ±5 switching frequency 65 % KHz PROTECTIONS parameter conditions/description over voltage protection TVS component to clamp short circuit protection hiccup mode, recovers automatically min typ max units min typ max units SAFETY & COMPLIANCE parameter conditions/description isolation voltage input to output safety approvals IEC 60601-1, EN 60601-1, UL 60601-1 EMI/EMC EN 55011 Class B, FCC CFR 47 Part 18 EN 60601-1-2, EN 61000-3-2, EN 61000-3-3 5,656 Vdc leakage current RoHS compliant 0.1 mA yes ENVIRONMENTAL parameter conditions/description min max units operating temperature see derating curve -20 70 °C -20 85 °C 93 % max units storage temperature operating humidity typ non-condensing MECHANICAL parameter conditions/description dimensions 4.0 x 2.0 x 1.1 (101.6 x 50.8 x 27.94 mm) min weight cooling method typ inch 125 free air convection (see derating curves below) cui.com g Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-60 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2021 page 3 of 4 DERATING CURVES MECHANICAL DRAWING units: mm[in] tolerance: mm: X.X = ±0.5 ; X.XX = ±0.25 inch: X.XX ±0.02 ; X.XXX = ±0.010 101.6 4.00 AC Line 2 No pin 3 AC Neutral 3.8 0.15 CN1 CN1 1 Voltage Adjustment 2 CN2 1 1 50.8 2.00 43.2 1.70 2 3 PVHI Series Connector 3 Pin CTR Pin removed 3.96 spacing 3.8 0.15 CN2 LED 3 4 94.0 3.70 PHVI Series Connector 4 Pin 3.96 spacing 3.2 0.126 (4 PLCS) 27.9 1.10 MAX 1.6 0.06 2.5 0.10 MAX Note: 1. All specifications measured at 25°C, 115/230Vac input voltage, and 75% load unless otherwise noted. cui.com 1 +Vo 2 +Vo 3 -Vo 4 -Vo Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: VMS-60 │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2021 page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 10/26/2011 1.01 V-Infinity branding removed 08/27/2012 1.02 updated spec 07/22/2013 1.03 company logo updated 12/21/2020 derating curve updated 05/10/2021 1.04 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.