VPPQ-1003C

VPPQ-1003C 100W Quad Output with PFC Function F eatures ·Universal AC input / Full range ·Built-in active PFC function ·Short circuit, overload, over-voltage protected ·Cooling by free air convection ·100% full load burn-in test ·Fixed switching frequency at PFC:67KHz PWM:134KHz (Optional) ·2 year warranty CH1 DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power E fficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection O ver voltage protection Temperature coefficient Set up, rise, hold up time Power factor Vibration Withstand voltage I solation resistance Working temp., humidity Storage temp., humidity Dimensions W eight Safety standards EMC standards Notes: CH2 5V ±3% CH3 15V +10,-5% CH4 -15V ±6% 3.3V ±3% 10A 10A 1.5A 0.3A 0~15A 2~15A 0.2~3A 0~1A 100mV 100mV 180mV 150mV ±1% ±1% ±2% ±1% ±2% ±2% ±6% ±1% 110W 72% +10% -5% ------90 ~ 264VAC 127 ~370VDC 1.65A/115V 0.85A/230V cold start 40A 0.95/230VAC PF>0.98/115VAC at full load 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10°C~+60% (refer to output derating curve), 20%-90% RH -20°C~+85°C, 10%-95% RH 7x4.25x1.5 inches (178x108x38 mm) 1.1 lb. (0.5 Kg) UL1950, TUV EN60950 Approved Meets CISPR22 (EN55022) Class B 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load 5. Load regulation is measured from 20% to 100% rated load, and oother output at 60% rated load 6. Each output provide up to maximum current, but total load cannot exceed max. output power *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty. VPPQ-1003C 100W Quad Output with PFC Function