•
F eatures
·Universal AC input / Full range ·Built-in active PFC function, PF>0.95 ·Protections:Short circuit/Over load/Over voltage ·Cooling by free air convection ·100% full load burn-in test ·Fixed switching frequency at 70KHz(Optional) ·3 year warranty
VPPQ-100B 100W 3, 4 Output with PFC
CH1 DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power E fficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection O ver voltage protection Over temp. protection Temperature coefficient Set up, rise, hold up time Power factor Vibration Withstand voltage I solation resistance Working temp., humidity Storage temp., humidity Dimensions W eight Safety standards EMC standards
N otes:
CH2 12V ±8%
CH3 -12V ±5%
CH4 -5V ±5%
5V ±3%
10A 3.4A 0.6A 0.6A 2-15A 0.3-4A 0-1A 0-1A 100mV 150mV 100mV 100mV ±1% ±2% ±2% ±1% ±2% ±6% ±2% ±2% 101W 75% CH1:+10,-5% 90~264VAC 47~63Hz; 127~370VDC 1.65A/115V 0.85A/230V cold start 40A 0.95/230VAC, PF>0.98/115VAC 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10°C~+60% (refer to output derating curve), 20%-90% RH -20°C~+85°C, 10%-95% RH 7x4.25x1.5 inches (178x108x38 mm) 1.37 lb. (0.62 Kg) UL1950, TUV EN60950 EN55022 CLASS B, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-3-2,-3
1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor 4. Line regulation is measured from low line to high line at rated load 5. Load regulation is measured from 20% to 100% rated load, and oother output at 60% rated load 6. Each output provide up to maximum current, but total load cannot exceed max. output power
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005
www.v-infinity.com
1-866-372-1258
•
Block Diagram
VPPQ-100B 100W 3, 4 Output with PFC
Rectifiers & Filter I/P
EMI Filter & Rectifiers
Regulator
V4 V3
PFC Circuit
Power Switching
PWM & PFC Control
Rectifiers & Filter MA & Control Rectifiers & Filter
Constant Current & Detection Circuit
FG
Rectifiers & Filter
+3.3V +5V Com
Active Start Circuit
(Option) PFC fosc: 67KHz PWM fosc: 134KHz
O.V.P.
Output Derating
100 80 70 60 40 20 -10 -10 0 0 10 20 30 40 50 60 (Horizontal) Load (%) 17CFM Forced Air Cooling (10cm) Natural Convection Cooling
S tatic Characteristics
Load (%)
100 90 80 70 60 50 40 90 100 115 135 155 230 264
Ambient Temp. (ºC)
Input Voltage (V) 60Hz
D imensions (mm)
177.8 Terminal Pin No. Assignment CN1: JST B3P-VH PIN 1,3: AC INPUT CN2: JST B5P-VH PIN 1,2,3: DC OUTPUT V2 PIN 4: DC OUTPUT V3 PIN 5: DC OUTPUT V4 CN3: JST B8P-VH PIN 1,2,3: DC OUTPUT V1 PIN 4,5,6,7,8: DC OUTPUT COM Mating Connectors CN1,2,3 Mating Connector type JST VHR Series or equivalent with JST SVH-21T-1.1 or equivalent crimp terminals. F4A/250V
AC/L FG AC/L CN1
165.1
+3.3V Adj. 1 8 1 5 CN2 +5V Adj. 4-¿3.96 107.95 95.25
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005
www.v-infinity.com
1-866-372-1258
40.64
