CEM-1206S

Additional Resources: Product Page | 3D Model | PCB Footprint date 08/05/2022 page 1 of 3 MODEL: CEM-1206S | DESCRIPTION: MAGNETIC BUZZER TRANSDUCER FEATURES • through hole • 5 V rated • externally driven SPECIFICATIONS parameter rated voltage conditions/description Vo-p min 3.0 0V at rated voltage, 2,400 Hz square wave, ½ duty rated frequency sound pressure level at 10 cm (A-weight), rated voltage, 2,400 Hz square wave, ½ duty coil resistance dimensions max 5.0 operating voltage current consumption typ units Vo-p 8.0 Vo-p 45 mA 2,400 Hz 85 92 dBA 40.0 47.0 54.0 Ø12.0 x 9.5 Ω mm weight 1.6 material PBT terminal pin type (Au plating) g operating temperature -30 70 °C storage temperature -40 85 °C max units 380 °C 265 °C washable yes RoHS Notes: yes 1. All specifications measured at 5~35°C, humidity at 45~85%, under 86~106 kPa pressure, unless otherwise noted. SOLDERABILITY parameter conditions/description min hand soldering for maximum 2 seconds 330 wave soldering see wave solder profile 255 Temperature [°C] Soldering Pot:260±5°C 4°C/s max Cooling by air A=5s max Pre-heating 160°C Max 4°C/s max 120s Max Time [sec] cuidevices.com typ 260 Additional Resources: Product Page | 3D Model | PCB Footprint CUI DEVICES | MODEL: CEM-1206S | DESCRIPTION: MAGNETIC BUZZER TRANSDUCER date 08/05/2022 | page 2 of 3 MECHANICAL DRAWING units: mm tolerance: ±0.5 mm Week 01 02 Year 19---2019 20---2020 CHINA FREQUENCY RESPONSE CURVE 100 90 dB 80 70 60 50 20 200 Hz 2K APPLICATION CIRCUIT +VDC + +2.5V 0V TR: 2SC1741AS or EQV Vin 180Ω cuidevices.com 20K Additional Resources: Product Page | 3D Model | PCB Footprint CUI DEVICES | MODEL: CEM-1206S | DESCRIPTION: MAGNETIC BUZZER TRANSDUCER date 08/05/2022 | page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 08/14/2006 1.01 brand update 01/02/2020 logo, datasheet style update 08/05/2022 1.02 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com