PBO-3C-5

Additional Resources: Product Page | 3D Model | PCB Footprint date 05/26/2022 page 1 of 8 SERIES: PBO-3C │ DESCRIPTION: INTERNAL AC-DC POWER SUPPLY FEATURES • • • • • • wide input range (85 ~ 305 Vac) wide operating temperature range (-40 to +85 C) IEC/EN/UL 62368 certified designed to meet 61558 & 60335 safety standards 1,000,000 hour MTBF flexible implementations to power a wide array of applications MODEL output voltage output current output power ripple and noise¹ efficiency² (Vdc) min (A) max (A) max (W) typ (mVp-p) typ (%) PBO-3C-3 3.3 0.06 0.6 1.98 150 67.0 PBO-3C-5 5.0 0.06 0.6 3.0 150 72.0 PBO-3C-9 9.0 0.033 0.333 3.0 150 76.0 PBO-3C-12 12.0 0.025 0.25 3.0 150 77.0 PBO-3C-15 15.0 0.02 0.2 3.0 150 78.0 PBO-3C-24 24.0 0.013 0.125 3.0 150 80.0 Note: 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, see Application Circuit 10% -100% load. 2. At 230 Vac input. PART NUMBER KEY PBO-3C - XX Output Voltage Base Number cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PBO-3C │ DESCRIPTION: AC-DC POWER SUPPLY date 05/26/2022 │ page 2 of 8 INPUT parameter conditions/description voltage ac input dc input min frequency current at 115 Vac at 230 Vac inrush current at 115 Vac at 230 Vac no load power consumption at 230 Vac max units 85 70 typ 305 430 Vac Vdc 47 63 Hz 0.12 0.06 A A 13 23 A A 0.15 W max units 820 680 470 470 330 200 μF μF μF μF μF μF OUTPUT parameter conditions/description capacitive load 3.3 Vdc output models 5 Vdc output models 9 Vdc output models 12 Vdc output models 15 Vdc output models 24 Vdc output models initial set point accuracy 10% ~ 100% load line regulation at rated load load regulation 10% ~ 100% load min temperature coefficient typ ±5 % ±1.5 % ±3 % ±0.15 %/°C PROTECTIONS parameter conditions/description min over current protection auto recovery 110 short circuit protection continuous, auto recovery, hiccup typ max units % SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output for 1 minute, leakage current 200 mA at 100 kHz. 2. Recommended to use a high frequency, low ESR, electrolytic capacitor (