PCN1-S12-D5-M-TR

Additional Resources: Product Page | 3D Model | PCB Footprint date 11/03/2022 page 1 of 9 SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • up to 1 W isolated output industry standard surface mount package nominal input voltages: 5, 12 Vdc single/dual unregulated output 1,500 Vdc isolation voltage low ripple and noise -40 to 100°C efficiency up to 81% meets EN 62368-1 MODEL input voltage output voltage output current output power ripple & noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PCN1-S5-S5-M 5 4.5~5.5 5 0 200 1 75 79 PCN1-S5-S12-M 5 4.5~5.5 12 0 84 1 75 79 PCN1-S5-S15-M 5 4.5~5.5 15 0 67 1 75 79 PCN1-S5-D5-M 5 4.5~5.5 ±5 0 ±100 1 75 74 PCN1-S5-D12-M 5 4.5~5.5 ±12 0 ±42 1 75 78 PCN1-S5-D15-M 5 4.5~5.5 ±15 0 ±33 1 75 78 PCN1-S12-S5-M 12 10.8~13.2 5 0 200 1 75 80 PCN1-S12-S12-M 12 10.8~13.2 12 0 84 1 75 81 PCN1-S12-S15-M 12 10.8~13.2 15 0 67 1 75 81 PCN1-S12-D5-M 12 10.8~13.2 ±5 0 ±100 1 75 77 PCN1-S12-D12-M 12 10.8~13.2 ±12 0 ±42 1 75 80 PCN1-S12-D15-M 12 10.8~13.2 ±15 0 ±33 1 75 81 Notes: 1. At full load, nominal input, 20 MHz bandwidth oscilloscope, with a 0.33 µF ceramic capacitor on the output. 2. Required to add a 2.2 µF ceramic capacitor to the input to reduce input voltage stress. 3. All specifications are measured at Ta=25°C, nominal input voltage, and rated output load unless otherwise specified. PART NUMBER KEY PCN1 - SXX - X XX - M - X Base Number Input Voltage Output S = single D = dual cui.com Output Voltage Packaging Style: SMT Package options TR = Tape & Reel Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER date 11/03/2022 │ page 2 of 9 INPUT parameter conditions/description min typ max units operating input voltage 5 Vdc input models 12 Vdc input models 4.5 10.8 5 12 5.5 13.2 Vdc Vdc surge voltage for maximum of 100 ms 5 Vdc input models 12 Vdc input models 9 18 Vdc Vdc current 5 Vdc input models 12 Vdc input models filter capacitive 250 110 mA mA input reverse polarity protection no input fuse Notes: 0.5 A time delay fuse for all models (recommended) 1. Required to add a 2.2 µF ceramic capacitor to the input to reduce input voltage stress. OUTPUT parameter conditions/description maximum capacitive load single output models dual output models min typ voltage accuracy max units 220 100 μF μF ±3.0 % line regulation 1.0% change in input voltage ±1.2 % load regulation from 20% load to full load ±10 % switching frequency at nominal Vin, full load ±0.05 %/°C max units 1 s max units 100 temperature coefficient kHz PROTECTIONS parameter conditions/description short circuit protection momentary min typ SAFETY AND COMPLIANCE parameter conditions/description min typ isolation voltage input to output for 1 minute 1,500 Vdc isolation resistance input to output 1,000 MΩ isolation capacitance input to output safety approvals meets 62368: EN conducted emissions EN 55022 Class B (external circuit required, see Figure 4) MTBF as per MIL-HDBK-217F, full load, GB, 25°C RoHS 2011/65/EU 10 pF 1,500,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curve storage temperature operating humidity non-condensing cui.com typ max units -40 100 °C -55 125 °C 95 % Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER date 11/03/2022 │ page 3 of 9 SOLDERABILITY parameter conditions/description reflow soldering see reflow solder profile min typ max units 245 °C 300 Notes: 1. 2. 3. 4. 5. 6. Temperature (ºC) 250 Soldering paste: SHENMAO PF610-P (Sn/Ag/Cu) Ramp up rate during preheat: 1.79°C/second (from 30°C~155°C) Soaking temperature: 0.33°C/second (from 155°C~185°C) Ramp up rate during reflow: 0.71°C/second (from 220°C~245°C) Peak temperature: 245°C (10 seconds max), above 220°C 40 to 70 seconds Ramp up rate during cooling: -1.75°C/second (from 220°C~150) 200 150 100 50 0 0 50 100 150 200 250 300 Reflow Time (Seconds) MECHANICAL parameter conditions/description dimensions single output models: 0.54 x 0.36 x 0.29 [13.7 x 9.2 x 7.4 mm] dual output models: 0.64 x 0.36 x 0.29 [16.2 x 9.2 x 7.4 mm] min typ case material non-conductive black plastic weight single output models dual output models max units inches inches 1.4 1.5 g g MECHANICAL DRAWING Single output models units: inches [mm] tolerance: X.XX ±0.01 [±0.25] X.XXX ±0.005 [±0.13] pin section tolerance: ±0.002[±0.05] 0.300 [7.62] Function 8 7 6 5 1 2 3 4 Single 1 -Vin 2 +Vin 3 No pin 4 -Vout 5 +Vout 6 No pin 7 No pin 8 NC 0.410 [10.41] PIN 5-0.024(0.60) 0.090 [2.29] PIN CONNECTIONS 0.300(7.62) 0.36(9.2) 0.12(3.0) 0.100(2.54) 0.100 [2.54] 0.050 [1.27] Recommended PCB Layout Top View 0.01(0.3) 0.29(7.4) NC=no connection 0.39(9.8) 0.44(11.2) 0.54(13.7) cui.com Additional Resources: Product Page | 3D Model CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER | PCB Footprint date 11/03/2022 │ page 4 of 9 MECHANICAL DRAWING (CONTINUED) Dual output models units: inches [mm] tolerance: X.XX ±0.01 [±0.25] X.XXX ±0.005 [±0.13] pin section tolerance: ±0.002[±0.05] 0.400 [10.16] 0.64(16.2) PIN CONNECTIONS 2 +Vin 3 No pin 4 Common 5 -Vout 6 No pin 7 +Vout 8 No pin 9 No pin 10 NC 10 9 8 7 6 0.410 [10.41] Dual -Vin 1 2 3 4 5 0.090 [2.29] 1 Function 0.36(9.2) PIN 6-0.024(0.60) 0.120(3.00) 0.300(7.60) 0.100(2.54) 0.400(10.2) 0.100 [2.54] 0.050 [1.27] Recommended PCB Layout Top View 0.29(7.4) 0.01(0.3) NC=no connection 0.39(9.8) 0.44(11.2) DERATING CURVE cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 11/03/2022 │ page 5 of 9 EFFICIENCY CURVES cui.com Additional Resources: Product Page | CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER 3D Model | PCB Footprint date 11/03/2022 │ page 6 of 9 EFFICIENCY CURVES (CONTINUED) cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER date 11/03/2022 │ page 7 of 9 PACKAGING (TUBE) units: mm Tube Size: 14 x 14 x 535 mm Single Output Models QTY: 36 pcs per tube Dual Output Models QTY: 30 pcs per tube PACKAGING (TAPE & REEL) Single output models 14.00 0.40 8.80 1.00 FEED DIRECTION 11.71 Dual output models units: mm 16.00 2.00 11.50 Reel Size: Ø13” QTY: 430 pcs per reel 1.50 1.75 4.00 11.72 FEED DIRECTION 0.40 8.60 0.80 16.50 1.50 16.00 24.00 2.00 11.50 4.00 24.00 Reel Size: Ø13” QTY: 430 pcs per reel 1.75 units: mm cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER date 11/03/2022 │ page 8 of 9 TEST CONFIGURATIONS Input Ripple Current & Output Noise Figure 1 Measuring Input Ripple Current Figure 2 Measuring Output Ripple & Noise for Single Output Models Table 1 L1 12 µH C1 2.2 µF tantalum capacitor C2 NC Figure 3 Measuring Output Ripple & Noise for Dual Output Models Table 2 Input Voltage (Vdc) Cin 5 2.2 µF ceramic capacitor 12 2.2 µF ceramic capacitor EMC RECOMMENDED CIRCUIT Test Condition Input Voltage: Nominal Output Load: Full Load Figure 4 Conducted Emissions Test Circuit Table 3 EN55022 Class B Recommended External Circuit Components Input Voltage (Vdc) C11 C21 L1 5 4.7 µF / 25 V 4.7 µF / 25 V 10 µH 12 4.7 µF / 25 V 4.7 µF / 25 V 10 µH Notes: 1. Ceramic Capacitor cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PCN1-M │ DESCRIPTION: DC-DC CONVERTER date 11/03/2022 │ page 9 of 9 REVISION HISTORY rev. description date 1.0 initial release 07/26/2016 1.01 added tube packaging option 06/09/2017 1.02 removed tube packaging option 02/14/2020 1.03 safeties updated 05/26/2021 1.04 derating curve, efficiency curves and circuit figures updated 07/01/2021 1.05 CE certification updated 11/03/2022 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.