PDP1-S5-S9-M

Additional Resources: Product Page | 3D Model | PCB Footprint date 05/16/2023 page 1 of 6 SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • 1W isolated output 1500 Vdc isolation compact SMD package continuous short circut protection no-load input current as low as 5mA wide temperature range: -40°C to +105°C high efficiency up to 83% UL 62368 certified designed to meet EN/BS EN 62368 MODEL input voltage output voltage output current output power ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (mVp-p) typ (%) PDP1-S5-S3-M 5 4.5~5.5 3.3 30 303 1 75 74 PDP1-S5-S5-M 5 4.5~5.5 5 20 200 1 75 82 PDP1-S5-S9-M 5 4.5~5.5 9 12 111 1 75 83 PDP1-S5-S12-M 5 4.5~5.5 12 9 84 1 75 83 Notes: 1. Ripple & noise testing condition at nominal input voltage and 10~100% load, 20 MHz bandwidth. PART NUMBER KEY PDP1 - S5 - XXX - M - XX Base Number Input Voltage Output S = single Output Voltage cui.com Packaging Style: SMT Packaging: “blank” = Tube Packaging TR = Tape and Reel Tube Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER date 05/16/2023 │ page 2 of 6 INPUT parameter conditions/description input voltage surge voltage for maximum of 1 second filter capacitance filter current full load/no load 3.3/5 Vdc input models 9/12 Vdc input models min typ max units 4.5 5 5.5 Vdc 9 Vdc 270/5 241/12 286/10 254/20 mA mA typ max units 1.5 1.2 % % 20 15 10 10 % % % % -0.7 OUTPUT parameter conditions/description line regulation Vin change ±1% 3.3 Vdc output other outputs load regulation 10% ~ 100% load 3.3 Vdc output 5 Vdc output 9 Vdc output 12 Vdc output set-point accuracy see regulation curve switching frequency full load, nominal input temperature coefficient full load min 15 10 8 7 270 kHz ±0.02 %/°C max units PROTECTIONS parameter conditions/description short circuit protection Continuous, self-recovery min cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER date 05/16/2023 │ page 3 of 6 SAFETY AND COMPLIANCE parameter conditions/description min isolation voltage input-output electric strength test for 1 minute 1500 isolation resistance input-output insulation at 500 Vdc 1000 isolation capacitance input-output capacitance at 100 KHz / 0.1 V safety approvals certified to 62368: UL designed to meet 62368: EN/BS EN EMC CISPR32/EN55032 Class B (see recommended circuit) ESD IEC/EN61000-4-2, Air ±8kV, Contact ±4kV, perf. Criteria B RoHS yes MTBF MIL-HDBK-217F @ 25°C typ max units Vdc MΩ 20 pF 3500 kHours ENVIRONMENTAL parameter conditions/description min typ max units operating temperature -40 105 °C storage temperature -55 125 °C 5 95 % max units 245 °C humidity non-condensing SOLDERABILITY parameter conditions/description reflow soldering 60 s max over 217°C min DERATING CURVES cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER date 05/16/2023 │ page 4 of 6 MECHANICAL parameter conditions/description dimensions 13.20 x 11.40 x 7.25 min case material Black plastic; flame-retardant and heat-resistant (UL94 V-0) typ 1.3 MECHANICAL DRAWING units: mm [inches] tolerance: ± 0.50 [±0.020] PIN CONNECTIONS FUNCTION 1 GND 2 Vin 4 0V 5 +Vo 3, 6, 7, 8 NC units mm weight PIN max cui.com g Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER date 05/16/2023 │ page 5 of 6 RECOMMENDED CIRCUITS recommended input & output capacitor values Vin (Vdc) Cin (µF) 5 Vo (Vdc) Cout (µF) 3.3/5 10 9 4.7 12 2.2 4.7 EMC COMPLIANCE CIRCUITS Recommended EMC Filter Values Output Voltage (Vdc) 3.3/5/9 12 47µF / 25V 47µF / 25V CY -- 1nF/2KVDC HEC C1206X102K202T JOHANSON 202R18W102KV4E C3 refer to the Cout in table 1 C1/C2 Input voltage 5 Vdc Emmissions LDM Note: 6.8µH 6.8µH To further improve EMI performance, we recommend the use a Y-capacitor CY cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PDP1-M │ DESCRIPTION: DC-DC CONVERTER date 05/16/2023 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 03/28/2020 1.01 derating curves and circuit figures updated 06/30/2021 1.02 measurements corrected in the mechanical section 01/10/2022 1.03 CE removed 11/04/2022 pn key updated 05/16/2023 1.04 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.