PEP1-S5-D12-M

Additional Resources: Product Page | 3D Model | PCB Footprint date 11/07/2022 page 1 of 6 SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • 1W isolated output 3000 Vdc isolation compact SMD package continuous short circut protection no-load input current as low as 5mA wide temperature range: -40°C to +105°C high efficiency up to 85% UL 62368 approved designed to meet EN/BS EN 62368 MODEL input voltage output voltage output current output power output capacitance ripple and noise1 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) max (µF) max (mVp-p) typ (%) PEP1-S5-D3-M 5 4.5~5.5 ±3.3 ±15 ±151 1 1200 75 74 PEP1-S5-D5-M 5 4.5~5.5 ±5 ±10 ±100 1 1200 75 82 PEP1-S5-D9-M 5 4.5~5.5 ±9 ±6 ±56 1 470 75 83 PEP1-S5-D12-M 5 4.5~5.5 ±12 ±5 ±42 1 220 75 83 PEP1-S5-D15-M 5 4.5~5.5 ±15 ±4 ±34 1 220 75 83 PEP1-S5-D24-M 5 4.5~5.5 ±24 ±2 ±21 1 100 100 85 PEP1-S5-S3-M 5 4.5~5.5 3.3 30 303 1 2400 75 74 PEP1-S5-S5-M 5 4.5~5.5 5 20 200 1 2400 75 82 PEP1-S5-S9-M 5 4.5~5.5 9 12 111 1 1000 75 83 PEP1-S5-S12-M 5 4.5~5.5 12 9 84 1 560 75 83 PEP1-S5-S15-M 5 4.5~5.5 15 7 67 1 560 75 83 PEP1-S5-S24-M 5 4.5~5.5 24 4 42 1 220 100 85 Notes: 1. Ripple & noise testing condition at nominal input voltage and 10%~100% load, 20 MHz bandwidth PART NUMBER KEY PEP1 - S5 - XXX - M Base Number Input Voltage Output Output Voltage S = single D = dual cui.com Packaging Style SMT Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/07/2022 │ page 2 of 6 INPUT parameter conditions/description input voltage surge voltage 5 Vdc input, for maximum of 1 second filter capacitance filter current full load/no load 3.3/5 Vdc output 9/12 Vdc output 15/24 Vdc output min typ max units 4.5 5 5.5 Vdc 9 Vdc 270/5 241/12 241/18 286/10 254/20 254/30 mA mA mA typ max units 1.5 1.2 %/% %/% 20 15 10 10 10 10 % % % % % % ±0.02 %/°C max units -0.7 OUTPUT parameter conditions/description line regulation Vin change ±1% 3.3 Vdc output other outputs load regulation 10% ~ 100% load 3.3 Vdc output 5 Vdc output 9 Vdc output 12 Vdc output 15 Vdc output 24 Vdc output set-point accuracy see regulation curve switching frequency full load, nominal input temperature coefficient full load min 15 10 8 7 6 5 270 kHz PROTECTIONS parameter conditions/description short circuit protection Continuous, self-recovery min cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/07/2022 │ page 3 of 6 SAFETY AND COMPLIANCE parameter conditions/description min isolation voltage input-output electric strength test for 1 minute 3000 isolation resistance input-output insulation at 500 Vdc 1000 isolation capacitance input-output capacitance at 100 KHz / 0.1 V safety approvals certified to 62368: UL designed to meet 62368: EN/BS EN EMC CISPR32/EN55032 Class B (see recommended circuit) ESD IEC/EN61000-4-2, Air ±8kV, Contact ±4kV, perf. Criteria B RoHS yes MTBF MIL-HDBK-217F @ 25°C typ max units Vdc MΩ 20 pF 3500 kHours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature humidity non-condensing max units -40 typ 105 °C -55 125 °C 5 95 % max units 245 °C SOLDERABILITY parameter conditions/description reflow soldering 60 s max over 217°C min DERATING CURVE cui.com typ Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/07/2022 │ page 4 of 6 MECHANICAL parameter conditions/description dimensions 15.24 x 11.40 x 7.25 min case material Black plastic; flame-retardant and heat-resistant (UL94-V0) typ 1.3 MECHANICAL DRAWING units: mm [inches] tolerance: ± 0.25 [±0.010] PIN CONNECTIONS Single Dual 1 GND GND 2 Vin Vin 5 0V 0V 6 NC -Vo 8 +Vo +Vo other NC NC units mm weight PIN max Note: NC pin to be isolated from other circuitry cui.com g Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/07/2022 │ page 5 of 6 RECOMMENDED CIRCUITS Parameter Description Vin (Vdc) Cin (µF) 5 Vo (Vdc) Cout (µF) 3.3/5 10 4.7 2.2 1 0.47 9 12 15 24 4.7 EMC COMPLIANCE CIRCUITS Recommended EMC Filter Values Output Voltage (Vdc) EMI 3.3/5/9 12/15/24 C1/C2 47µF / 25V 47µF / 25V CY -- 1nF/4KVDC VISHAY HGZ102MBP TDK CD45-E2GA102M-GKA C3 LDM Note: refer to the Cout in table 1 6.8µH 6.8µH For EMC tests we use Part ① in Fig. 3 for immunity and part ➁ for emissions test. Selecting based on needs. cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PEP1-M │ DESCRIPTION: DC-DC CONVERTER date 11/07/2022 │ page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 03/28/2020 1.01 units updated in mechanical drawing section 01/20/2021 1.02 derating curves and circuit figures updated 07/06/2021 CE certification removed 11/07/2022 1.03 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.