PES1-S5-S5-M

Additional Resources: Product Page | 3D Model | PCB Footprint date 09/26/2023 page 1 of 8 SERIES: PES1-M │ DESCRIPTION: DC-DC CONVERTER FEATURES • • • • • • • • • • 1 W isolated output smaller package single/dual unregulated outputs 3,000 Vdc isolation short circuit protection extended temperature range (-40~105°C) antistatic protection up to 8kV high efficiency at light load efficiency up to 82% designed to meet EN/BS EN 62368-1 MODEL input voltage output voltage output current output power ripple and noise2 efficiency typ (Vdc) range (Vdc) (Vdc) min (mA) max (mA) max (W) typ (mVp-p) typ (%) PES1-S3-S3-M 3.3 2.97~3.63 3.3 30 303 1 60 69 PES1-S3-S5-M * 3.3 2.97~3.63 5 20 200 1 60 74 PES1-S5-S3-M1 5 4.5~5.5 3.3 30 303 1 60 72 1 PES1-S5-S5-M 5 4.5~5.5 5 20 200 1 60 80 PES1-S5-S9-M1 5 4.5~5.5 9 12 111 1 60 80 1 PES1-S5-S12-M 5 4.5~5.5 12 9 84 1 60 80 PES1-S5-S15-M1 5 4.5~5.5 15 7 67 1 60 80 PES1-S5-S24-M 5 4.5~5.5 24 4 42 1 60 80 PES1-S5-D5-M* 5 4.5~5.5 ±5 ±10 ±100 1 60 80 PES1-S5-D9-M* 5 4.5~5.5 ±9 ±6 ±56 1 60 80 PES1-S5-D12-M* 5 4.5~5.5 ±12 ±5 ±42 1 60 79 PES1-S5-D15-M* 5 4.5~5.5 ±15 ±3 ±33 1 60 81 1, 1 PES1-S5-D24-M* 5 4.5~5.5 ±24 ±2 ±21 1 60 81 PES1-S12-S3-M1,* 12 10.8~13.2 3.3 30 303 1 60 72 1 PES1-S12-S5-M 12 10.8~13.2 5 20 200 1 60 71 PES1-S12-S9-M1 12 10.8~13.2 9 12 111 1 60 80 PES1-S12-S12-M 12 10.8~13.2 12 9 84 1 60 80 PES1-S12-S15-M1,* 12 10.8~13.2 15 7 67 1 60 80 PES1-S12-D5-M* 12 10.8~13.2 ±5 ±10 ±100 1 60 80 PES1-S12-D9-M* 12 10.8~13.2 ±9 ±6 ±56 1 60 80 PES1-S12-D12-M* 12 10.8~13.2 ±12 ±5 ±42 1 60 73 PES1-S12-D15-M* 12 10.8~13.2 ±15 ±3 ±33 1 60 81 PES1-S12-D24-M* 12 10.8~13.2 ±24 ±2 ±21 1 60 81 PES1-S15-S15-M 15 13.5~16.5 15 7 67 1 60 80 PES1-S24-S5-M 24 21.6~26.4 5 20 200 1 60 73 PES1-S24-S9-M1,* 24 21.6~26.4 9 12 111 1 60 80 PES1-S24-S15-M 24 21.6~26.4 15 7 67 1 60 72 1 1 1 Notes: 1. UL approved 2. Ripple and noise are measured at 20 MHz BW by “parallel cable” method with 1 μF ceramic and 10 μF electrolytic capacitors on the output. 3. * Discontinued model. cui.com Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PES1-M │ DESCRIPTION: DC-DC CONVERTER MODEL (CONTINUED) input voltage date 09/26/2023 │ page 2 of 8 output voltage output current ripple and noise2 efficiency max (mA) max (W) typ (mVp-p) typ (%) typ (Vdc) range (Vdc) PES1-S24-S24-M1 24 21.6~26.4 24 4 42 1 60 80 PES1-S24-D5-M* 24 21.6~26.4 ±5 ±10 ±100 1 60 70 PES1-S24-D9-M* 24 21.6~26.4 ±9 ±6 ±56 1 60 80 PES1-S24-D12-M* 24 21.6~26.4 ±12 ±5 ±42 1 60 72 PES1-S24-D15-M* 24 21.6~26.4 ±15 ±3 ±33 1 60 71 PES1-S24-D24-M* 24 21.6~26.4 ±24 ±2 ±21 1 60 76 Notes: min (mA) output power (Vdc) 1. UL approved 2. Ripple and noise are measured at 20 MHz BW by “parallel cable” method with 1 μF ceramic and 10 μF electrolytic capacitors on the output. 3. * Discontinued model. PART NUMBER KEY PES1 - SXX - XXX - M - X Base Number Input Voltage Output S = single D = dual Output Voltage Packaging Style "blank" = tube TR = tape & reel INPUT parameter conditions/description min typ max units operating input voltage 3.3 Vdc input models 5 Vdc input models 12 Vdc input models 15 Vdc input models 24 Vdc input models 2.97 4.5 10.8 13.5 21.6 3.3 5 12 15 24 3.63 5.5 13.2 16.5 26.4 Vdc Vdc Vdc Vdc Vdc surge voltage for maximum of 1 second 3.3 Vdc input models 5 Vdc input models 12 Vdc input models 15 Vdc input models 24 Vdc input models -0.7 -0.7 -0.7 -0.7 -0.7 5 9 18 21 30 Vdc Vdc Vdc Vdc Vdc filter capacitance filter max units ±1.5 ±1.2 % % OUTPUT parameter conditions/description line regulation for Vin change of 1% 3.3 Vdc output models all other models min load regulation measured from 10% load to full load 3.3 Vdc output models 5 Vdc output models 9 Vdc output models 12 Vdc output models 15 Vdc output models 24 Vdc output models voltage accuracy see tolerance envelope curve switching frequency 100% load, nominal input voltage temperature coefficient 100% load typ 18 12 9 8 7 6 % % % % % % 100 kHz ±0.03 cui.com %/°C Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PES1-M │ DESCRIPTION: DC-DC CONVERTER date 09/26/2023 │ page 3 of 8 PROTECTIONS parameter conditions/description short circuit protection PES1-S5-S24-M, PES1-S5-D24-M and all 24 V input models1 all other models: continuous, automatic recovery Note: min typ max units 1 s max units 1. If maximum protection time is exceeded input power must me cycled to restart device. SAFETY AND COMPLIANCE parameter conditions/description isolation voltage input to output for 1 minute at 1 mA max. 3,000 Vdc isolation resistance input to output at 500 Vdc 1,000 MΩ safety approvals2 certified to 60950-1: UL designed to meet 62368: EN/BS EN conducted emissions CISPR22/EN55022 class B (external circuit required, see Figure 1) radiated emissions CISPR22/EN55022 class B (external circuit required, see Figure 1) ESD IEC/EN61000-4-2, class B, contact ± 8kV for single outputs IEC/EN61000-4-2, class B, contact ± 6kV for dual outputs MTBF as per MIL-HDBK-217F @ 25°C RoHS 2011/65/EU Note: min typ 3,500,000 hours 2. See specific models noted on page 1 & 2. ENVIRONMENTAL parameter conditions/description min operating temperature see derating curve storage temperature storage humidity non-condensing temperature rise at full load, Ta = 25°C typ max units -40 105 °C -55 125 °C 95 25 % °C SOLDERABILITY3 parameter conditions/description reflow soldering maximum duration time ≤60 s at 217°C Note: min 3. Please refer to IPC/JEDEC J-STD-020D.1 for additional information. cui.com typ max units 245 °C Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: PES1-M │ DESCRIPTION: DC-DC CONVERTER date 09/26/2023 │ page 4 of 8 MECHANICAL parameter conditions/description dimensions single output models: 12.70 x 8.30 x 7.25 dual output models: 15.24 x 8.30 x 7.25 min case material epoxy resin (UL94-V0) weight single output models dual output models typ max units mm mm 1.6 2.0 g g MECHANICAL DRAWING SINGLE OUTPUT MODELS rArC units: mm[inch] tolerance: ±0.25[±0.010] pin section tolerance: ±0.10[±0.004] 2 Vin 4 0V 5 +Vo 8 NC    $ AC GND d q 1 AC Function AC AC :UV