PJ-011A

Additional Resources: Product Page | 3D Model | PCB Footprint date 06/02/2020 page 1 of 3 MODEL: PJ-011A │ DESCRIPTION: DC POWER JACK FEATURES • • • • 2.0 mm center pin 5.0 A rating vertical orientation threaded panel mount SPECIFICATIONS parameter conditions/description min rated input voltage typ max 24 units Vdc rated input current 5.0 A contact resistance1 30 mΩ 500 Vac insulation resistance at 500 Vdc voltage withstand for 1 minute 100 MΩ insertion/withdrawal force 0.3 3 kg operating temperature -25 70 °C life 5,000 flammability rating UL94HB RoHS yes Note: cycles 1. When measured at a current of less than 100 mA/1 kHz SOLDERABILITY parameter conditions/description hand soldering for 3~5 seconds min cuidevices.com typ max units 360 °C Additional Resources: Product Page | 3D Model | PCB Footprint CUI Devices │ MODEL: PJ-011A │ DESCRIPTION: DC POWER JACK date 06/02/2020│ page 2 of 3 MECHANICAL DRAWING units: mm[inches] tolerance: ±0.3 mm unless otherwise noted MATERIAL PLATING center pin copper nickel terminal 1 brass silver terminal 2 phosphor bronze silver terminal 3 brass silver nut brass nickel insulator bakelite plastic POM 13.00 0.512 2.00 0.079 9.00 0.354 4.00 0.157 6.00 0.236 3.00 0.118 2.00 0.079 11.60 0.457 15.80 0.622 1.50 0.059 4.90 0.193 (2 PLCS) 2.00 0.079 15.00 0.591 2.30 0.091 4.50 0.177 1.52 0.060 panel cutout M13X1.0 0.80X3.50 1 11.9 0.469 0.2 3 2 13.3 0.524 0.2 1 2 3 3.40 0.134 1.40 0.055 (2 PLCS) 2.50 0.098 (2 PLCS) 0.60X3.00 (2 PLCS) 1.25 0.049 1.88 0.074 PCB LAYOUT BACK VIEW 1 3 2 SCHEMATIC MATING PLUG Jack Insertion Depth: 9.0 mm Note: Model PJ-011A Center Pin Ø2.0 mm 1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted. cuidevices.com Additional Resources: Product Page | 3D Model CUI Devices │ MODEL: PJ-011A │ DESCRIPTION: DC POWER JACK | PCB Footprint date 06/02/2020│ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 04/17/2006 1.01 pin positions updated 05/01/2008 1.02 model revised 05/12/2008 1.03 hole cutout dimensions added 06/27/2011 brand update 06/02/2020 1.04 The revision history provided is for informational purposes only and is believed to be accurate. CUI Devices offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI Devices reserves the right to make changes to the product at any time without notice. Information provided by CUI Devices is believed to be accurate and reliable. However, no responsibility is assumed by CUI Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI Devices products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. cuidevices.com