PLDA25-530-277A

For more information, please visit the product page. date 09/22/2014 page 1 of 6 SERIES: PLDA25 │ DESCRIPTION: LED DRIVER FEATURES ED • over voltage, and continuous short circuit protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 86% • suitable for LED lighting and signage applications up to 25 W continuous power universal input range (90~305 Vac) single output dimming options: PWM, 1~10 Vdc power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated MODEL output voltage range1 max (Vdc) 9 48 output current output power ripple and noise2 efficiency (mA) max (W) max (mVp-p) typ (%) 530 25.44 480 86 TI PLDA25-530-277 PLDA25-700-277 PLDA25-1100-277 9 36 700 25.2 360 84 9 24 1100 26.4 240 86 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. PART NUMBER KEY N Notes: min (Vdc) N U • • • • • • • • IS C Base Number O PLDA25 - XXXX - 277XXX IP Rating “blank” = IP64 A = IP67 Output Current Dimming PE = PWM, 1~10 Vdc “blank” = no dimming D Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 2 of 6 INPUT conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load at 277 Vac, 100% load max units 90 127 305 420 Vac Vdc 47 63 Hz 0.3 0.14 0.9 0.9 OUTPUT U no load power consumption conditions/description measured from high line to low line at full load min current load regulation measured from min. to max. of constant current region constant current accuracy at nominal input and full load at 90 Vac PROTECTIONS TI switching frequency temperature coefficient conditions/description TVS clamp short circuit protection hiccup mode, auto recovery SAFETY & COMPLIANCE isolation resistance safety approvals conditions/description O parameter isolation voltage N parameter over voltage protection typ N parameter current line regulation start-up time typ ED parameter 5 A 0.5 mA 1 W max units ±5 % ±5 % ±5 60 0.5 min typ min typ % kHz ±0.05 input to output, for 1 minute input to output A A s %/°C max units max units 3,750 Vac 100 MΩ UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5,6), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU IS C EMI/EMC 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves storage temperature D operating humidity non-condensing max units -40 70 °C -40 85 °C 95 % 3,000 m 20 operating altitude cui.com typ For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 3 of 6 MECHANICAL parameter conditions/description dimensions 5.511 x 1.181 x 0.787 (140 x 30 x 20 mm) min typ units inches 100 MECHANICAL DRAWING MODELS WITHOUT DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified 6.300[160.00] 0.393[10.00] Color Function Red +Vo Black -Vo Black -V0 Red +V0 UL 1015 18AWG ACL Black ACN White UL 1015 18AWG 0.393[10.00] 7.874[200.00] 7.874[200.00] 1.181 [30.00] N 0.315[8.00] 0.866[22.00] TI 8.268[210.00] 0.393[10.00] 7.087[180.00] 0.087 [2.20] OUTPUT WIRE CONNECTIONS 0.393[10.00] 0.787 [20.00] ACL ACN N Black White 5.984[152.00] 5.511[140.00] U 0.394 [10.00] Function 0.137 [3.50] INPUT WIRE CONNECTIONS g ED weight Color max O MODELS WITH DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified ACN OUTPUT WIRE CONNECTIONS Function Red +Vo Black -Vo Blue D+ White D- ACL Black White INPUT UL 1015 18AWG 0.393[10.00] 7.874[200.00] 8.268[210.00] OUTPUT 0.394[10.00] 12.953[329.00] DIMMING Blue & White 22AWG (Optional) Blue D+ D Color ACN 0.393[10.00] 0.551[14.00] White 0.394[10.00] 0.394[10.00] 0.315[8.00] ACL 8.465[215.00] -Vo Black 18AWG 6.693[170.00] +Vo RED 18AWG Red +Vo Black -Vo 0.787 [20.00] Black 5.984[152.00] 5.511[140.00] 0.137 [3.50] Function IS C Color 0.394 [10.00] INPUT WIRE CONNECTIONS (Optional) White D- cui.com 1.181 [30.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 4 of 6 DERATING CURVES PF vs. Output Current 1.00 100 0.95 80 0.90 THD vs. Output Current 25% ED Temperature Derating Curve 60 9$& THD Safe operating area 0.85 PF Load (%) 20% 50 40 0.80 20 0.75 -40 -20 0 20 40 50 60 70 80 100 9$& 60% 70% 80% 90% Output Current 70% 80% 90% 100% Efficiency vs. Output Current (PLDA25-530-277, with dimming)      Efficiency    TI   9      9  9 9    9 9 9 9 N  Output Current Efficiency vs. Output Current (PLDA25-700-277)  O      IS C     9      9 Output Current 9 Efficiency vs. Output Current (PLDA25-1100-277)  Efficiency   D     9 9    9  9  9 Output Current Efficiency vs. Output Current (PLDA25-1100-277, with dimming)    9   9  9  9   9   9 9 Output Current Efficiency vs. Output Current (PLDA25-700-277, with dimming)  Efficiency Efficiency 60% N Efficiency vs. Output Current (PLDA25-530-277)  Efficiency 5% 50% Output Current EFFICIENCY CURVES Efficiency 100% U Ambient Temperature (°C)  10% 9$& 0.70 50% 9$& 15% 9      9 9 Output Current 9 9 cui.com 9 Output Current 9 For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 5 of 6 APPLICATION NOTES +Vo (RED) AC LED DRIVER ACN (WHITE) -Vo (BLACK) U ACL (BLACK) ED 1. Dimming Dimming should be controlled from the dimming controller with PWM or 1~10 Vdc. D+ (BLUE) 1~10 Vdc Dimming Voltage Output Current 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (open) 20% 30% 40% 50% 60% 70% 80% 90% 100% N 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% D IS C O Output Current Note: Dimming Controller 10% PWM Dimming (@ 1kHz, 10V) Duty Cycle TI N D(WHITE) 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA25 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 6 of 6 REVISION HISTORY 1.0 description date initial release 09/22/2014 ED rev. D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.