PLDA40-1110-277PE

For more information, please visit the product page. date 09/22/2014 page 1 of 6 SERIES: PLDA40 │ DESCRIPTION: LED DRIVER FEATURES MODEL output voltage range1 min (Vdc) max (Vdc) 9 48 output current output power ripple and noise2 efficiency (mA) max (W) max (mVp-p) typ (%) 840 40.32 480 88 TI PLDA40-840-277 PLDA40-1110-277 PLDA40-1700-277 9 36 1110 40 360 86 9 24 1700 40.8 240 86 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. PART NUMBER KEY N Notes: ED U • • • • • over voltage, continuous short circuit, and over temperature protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 88% • suitable for LED lighting and signage applications up to 40 W continuous power universal input range (90~305 Vac) single output dimming options: PWM, 1~10 Vdc, resistive, DALI power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated N • • • • IS C Base Number O PLDA40 - XXXX - 277XXX IP Rating “blank” = IP64 A = IP67 Output Current Dimming PE = PWM, 1~10 Vdc, resistive D = DALI “blank” = no dimming D Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 2 of 6 INPUT conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load max units 90 127 typ 305 420 Vac Vdc 50 60 Hz ED parameter 0.45 0.22 0.9 OUTPUT U no load power consumption A mA 1 W max units conditions/description current line regulation measured from high line to low line at full load ±5 % current load regulation measured from min. to max. of constant current region ±5 % constant current accuracy at nominal input and full load ±5 % at 90 Vac temperature coefficient PROTECTIONS TI switching frequency start-up time conditions/description over voltage protection TVS clamp short circuit protection hiccup mode, auto recovery over temperature protection SAFETY & COMPLIANCE isolation voltage isolation resistance safety approvals 60 kHz 0.5 ±0.05 typ min typ s %/°C max 105 input to output, for 1 minute input to output units °C max units 3,750 Vac 100 MΩ UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE IEC62386-102, IEC62386-207 IS C DALI conditions/description O parameter min N parameter typ 5 0.75 parameter N min A A EMI/EMC FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves -40 -40 D storage temperature operating altitude cui.com typ max units 70 °C 85 °C 3,000 m For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 3 of 6 MECHANICAL parameter conditions/description dimensions 6.614 x 1.575 x 0.992 (168 x 40 x 25.2 mm) min typ units inches 350 MECHANICAL DRAWING MODELS WITHOUT DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS 0.393[10.00] Function Red +Vo Black -Vo 7.677[195.00]±0.787[20.00] 8.071[205.00]±0.787[20.00] Red UL 1015 16AWG Black +V0 -V0 0.393[10.00] 7.874[200.00]±0.787[20.00] TI Color UL 1015 18AWG OUTPUT 0.393[10.00] 0.992[25.20] OUTPUT WIRE CONNECTIONS INPUT ACL Black ACN White 0.393[10.00] N ACL ACN 0.138[3.50] Black White U 7.008[178.00] Function g ED weight Color max N 1.575[40.00] O MODELS WITH DIMMING units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified ACL White ACN 0.787[20.00] Black ACL Color Function Red +Vo Black -Vo Blue1 D+/DA+ White1 D-/DA- White ACN 0.394[10.00] 6.614[168.00] 0.787[20.00] INPUT OUTPUT UL 2464 16AWG+22AWG UL 2464 18AWG 11.811[300.00]±0.787[20.00] 11.811[300.00]±0.787[20.00] 0.992[25.20] OUTPUT WIRE CONNECTIONS 7.402[188.00] 0.138[3.50] Function IS C Color Black 0.472[12.00] INPUT WIRE CONNECTIONS D Note: 1. DALI models are marked with “DA” 0.433[11.00] 1.575[40.00] cui.com 22AWG Blue D+ 22AWG White D- (Optional) 16AWG Red +Vo 16AWG Black -Vo 0.394[10.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 4 of 6 DERATING CURVES PF vs. Output Current 1.00 100 0.95 80 0.90 THD vs. Output Current 25% ED Temperature Derating Curve 60 9$& THD Safe operating area 0.85 PF Load (%) 20% 50 40 0.80 20 0.75 -40 -20 0 20 40 50 60 70 80 100 9$& 60% 70% 80% 90% Output Current 60% 70% 80% 90% 100% Efficiency vs. Output Current (PLDA40-1110-277PE, with dimming) N Efficiency vs. Output Current (PLDA40-840-277PE, with dimming)        Efficiency TI Efficiency 5% 50% Output Current EFFICIENCY CURVES    9   9 Output Current 9 O 9 Efficiency vs. Output Current (PLDA40-1700-277PE, with dimming)   IS C        9 9   9 Output Current 9 D 9   9 9  N    9  Efficiency 100% U Ambient Temperature (°C)  10% 9$& 0.70 50% 9$& 15% cui.com   9 9 Output Current 9 For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 5 of 6 APPLICATION NOTES +Vo (RED) AC LED DRIVER ACN (WHITE) -Vo (BLACK) U ACL (BLACK) ED 1. Dimming Dimming should be controlled from the dimming controller with DALI, PWM, 1~10 Vdc, or resistive. Set the DALI controller to “broadcast mode” when connecting to the LED driver, since it will not be addressed in production. D+/DA (BLUE) 1~10 Vdc Dimming Voltage Output Current 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (Open) 20% 30% 40% 50% 60% 70% 80% 90% 100% N Output Current Dimming Controller 10% Potentiometer Dimming Potentiometer TI N D-/DA (WHITE) 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty Cycle O PWM Dimming (@ 1kHz, 10V) 20% 30% 40% 50% 60% 70% 80% 90% 100% (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% D IS C Output Current 10% Note: 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA40 │ DESCRIPTION: LED DRIVER date 09/22/2014 page 6 of 6 REVISION HISTORY 1.0 description date initial release 09/22/2014 ED rev. D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.