PLDA60-1666-277DAR

For more information, please visit the product page. date 03/13/2015 page 1 of 6 SERIES: PLDA60 │ DESCRIPTION: LED DRIVER FEATURES MODEL PLDA60-1250-277 9 9 9 PLDA60-D625-277 9 max (Vdc) output current output power ripple and noise2 efficiency (mA) max (W) max (mVp-p) typ (%) 1250 60 480 86 48 36 1666 60 360 85 24 2500 60 240 85 625 625 30 30 480 87 48 Io1 Io2 N PLDA60-1666-277 PLDA60-2500-277 PLDA60-D833-277 PLDA60-D1250-277 ED U output voltage range1 min (Vdc) 9 36 Io1 Io2 833 833 30 30 360 85 9 24 Io1 Io2 1250 1250 30 30 240 85 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. O Notes: N • • • • • over voltage, continuous short circuit, and over temperature protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 86% • suitable for LED lighting and signage applications up to 60 W continuous power universal input range (90~305 Vac) single/dual output dimming options: PWM, 1~10 Vdc, resistive, DALI power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated TI • • • • IS C PART NUMBER KEY PLDA60 - XXXXX - 277XXA IP Rating A = IP67 D Base Number Dimming PE = PWM, 1~10 Vdc, resistive D = DALI “blank” = no dimming Output “blank” = single D = dual Output Current Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 2 of 6 INPUT conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load max units 90 127 typ 305 420 Vac Vdc 50 60 Hz ED parameter 0.69 0.32 0.9 OUTPUT U no load power consumption A mA 1 W max units conditions/description current line regulation measured from high line to low line at full load ±5 % current load regulation measured from min. to max. of constant current region ±5 % constant current accuracy at nominal input and full load ±5 % at 90 Vac temperature coefficient PROTECTIONS TI switching frequency start-up time conditions/description over voltage protection TVS clamp short circuit protection hiccup mode, auto recovery over temperature protection SAFETY & COMPLIANCE isolation voltage isolation resistance safety approvals 60 kHz 0.5 ±0.05 typ min typ s %/°C max 105 input to output, for 1 minute input to output units °C max units 3,750 Vac 100 MΩ UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE IEC62386-102, IEC62386-207 IS C DALI conditions/description O parameter min N parameter typ 5 0.75 parameter N min A A EMI/EMC FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5,6,8,11), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves storage temperature D operating altitude cui.com typ max units -40 70 °C -40 85 °C 3,000 m For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 3 of 6 MECHANICAL parameter conditions/description dimensions 10.315 x 1.575 x 0.992 (262 x 40 x 25.2 mm) min typ max units inches 530 MECHANICAL DRAWING SINGLE OUTPUT MODELS units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified 11.102[282.00] 10.709[272.00] INPUT WIRE CONNECTIONS Black ACL White 0.787[20.00] 0.394[10.00] Black ACL White ACN ACN INPUT 0.394[10.00] Black -Vo Blue1 +Dimming (D+/DA+) White1 -Dimming (D-/DA-) 1.024[26.00] Note: 1. wires present on dimming models only. PE models are marked with “D”, DALI models are marked with “DA”. N DUAL OUTPUT MODELS units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified INPUT WIRE CONNECTIONS Function Black ACL White ACN O Color 1.575[40.00] TI +Vo 11.102[282.00] 10.709[272.00] 10.315[262.00] 11.811[300.00]±0.787[20.00] 0.787[20.00] 0.394[10.00] 0.787[20.00] Black ACL White ACN 0.394[10.00] INPUT UL 2464 16AWG+22AWG OUTPUT UL 2464 16AWG Blue +Dimming (D+/DA+) White1 -Dimming (D-/DA-) Red +Vo2 Black -Vo2 D Note: 1. wires present on dimming models only. PE models are marked with “D”, DALI models are marked with “DA”. 0.992[25.20] -Vo1 1 1.024[26.00] +Vo1 11.811[300.00]±0.787[20.00] 0.276[7.00] IS C Red Black Red +Vo 0.394[10.00] 0.787[20.00] OUTPUT WIRE CONNECTIONS Function 22AWG Blue D+ 22AWG White D- (Optional) 16AWG Red +Vo 16AWG Black -Vo Black-Vo UL 2464 18AWG 11.811[300.00]±0.787[20.00] Color 22AWG Blue D+ (Optional) 22AWG White D16AWG Red +Vo 16AWG Black -Vo 0.276[7.00] Function N OUTPUT WIRE CONNECTIONS Red UL 2464 16AWG+22AWG OUTPUT UL 2464 18AWG 11.811[300.00]±0.787[20.00] Color 11.811[300.00]±0.787[20.00] U Function 0.787[20.00] 0.992[25.20] Color 10.315[262.00] g ED weight cui.com 1.575[40.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 4 of 6 DERATING CURVES Temperature Derating Curve THD vs. Output Current 25% 60 50 40 20 -20 0 20 40 50 60 70 80 Ambient Temperature (°C) 100 20% 9$& 0.90 0.85 55W 0.80 100VAC 1 15VAC 2 30VAC Input Voltage (AC) 277 VAC 305VA C 0.70 50% 60% 100% 5% 50% 60% 70% 80% 90% Output Current N    Efficiency    9     9  9   TI  9     9 Output Current 9 9 N 9 Efficiency vs. Output Current (PLDA60-2500-277D)   O      IS C    9    9 Output Current 9 Efficiency vs. Output Current (PLDA60-D833-277D)    Efficiency   D   9   9 9   9   9  9 Output Current Efficiency vs. Output Current (PLDA60-D1250-277D)    9  9  9       9 9  9  9 Output Current Efficiency vs. Output Current (PLDA60-D625-277D)  Efficiency Efficiency 90% Efficiency vs. Output Current (PLDA60-1666-277D)   Efficiency 80% U Efficiency vs. Output Current (PLDA60-1250-277D)  Efficiency 70% Output Current EFFICIENCY CURVES  10% 9$& 0.75 90V AC 9$& 15% 9$& 50W 45W ED Safe operating area 60W THD 80 PF Output Power (W) Load (%) PF vs. Output Current 1.00 0.95 100 -40 Output Power Vs. Input Voltage 65W    9 9 Output Current 9 9 cui.com 9 Output Current 9 100% For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 5 of 6 APPLICATION NOTES +Vo (RED) AC LED DRIVER ACN (WHITE) -Vo (BLACK) U ACL (BLACK) ED 1. Dimming Dimming should be controlled from the dimming controller with DALI, PWM, 1~10 Vdc, or resistive. Set the DALI controller to “broadcast mode” when connecting to the LED driver, since it will not be addressed in production. D+/DA (BLUE) 1~10 Vdc Dimming Voltage Output Current 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (Open) 20% 30% 40% 50% 60% 70% 80% 90% 100% N Output Current Dimming Controller 10% Potentiometer Dimming Potentiometer TI N D-/DA (WHITE) 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty Cycle O PWM Dimming (@ 1kHz, 10V) 20% 30% 40% 50% 60% 70% 80% 90% 100% (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% D IS C Output Current 10% Note: 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 6 of 6 REVISION HISTORY description date 1.0 initial release 09/23/2014 1.01 updated datasheet ED rev. 03/13/2015 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com techsupport@cui.com CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.